Is It Okay Not to Repair a Catalytic Converter with Low Efficiency?

1 Answers
LeonardoLee
07/29/25 6:49pm
A catalytic converter with low efficiency may fail to function properly, leading to excessive exhaust emissions. The primary causes of low catalytic converter efficiency are aging or clogging, which reduce its performance. A clogged catalytic converter can significantly increase fuel consumption, reduce engine power, and cause excessive emissions. In severe cases, it may even cause the exhaust pipe to overheat and turn red, potentially leading to vehicle fires. Below is relevant information about catalytic converters: 1. A catalytic converter is a device that converts three harmful gases into harmless substances. It is installed in the exhaust system and resembles a muffler in appearance. 2. A clogged catalytic converter not only increases fuel consumption, reduces power, and causes excessive emissions but may also lead to the exhaust pipe overheating and vehicle fires. For a clogged catalytic converter, replacement is the only viable solution.
Was this review help?
9
5
Share
More Forum Discussions

What brand of car is Skyworth?

Skyworth is a car brand under Skyworth, which is a brand-new new energy vehicle brand. Taking the Skyworth EV6 2021 model as an example, the information about Skyworth cars is as follows: Body dimensions: The length, width, and height of the Skyworth EV6 2021 model are 4698/1908/1696mm, respectively, with a wheelbase of 2800mm. Power: The Skyworth EV6 is equipped with a drive motor with a maximum power of 150kW and a maximum torque of 320 N·m. The 0-100 km/h acceleration time is improved to 7.9 seconds (9.6 seconds for the ET5). In terms of battery, the Skyworth EV6 will have three optional battery capacities: 55.33kWh, 71.98kWh, and 88kWh (optional). The maximum cruising ranges are 410km, 520km, and 600km, respectively.
11
2
Share

What to Pay Attention to When Selling a Car to a Used Car Dealer

Selling a car to a used car dealer requires attention to the following points: Prepare relevant documents: The car owner must bring the necessary documents when selling the car. Without them, the transfer of ownership cannot be completed, and the transaction will fail. The owner should bring the vehicle's registration certificate, purchase invoice or transfer invoice, insurance and annual inspection materials, as well as their ID card. If any document is missing, contact the vehicle management office or insurance company for a replacement. Ensure all documents are complete when selling the car, as only with complete documents can the transfer be processed. Understand the market conditions: Most car owners are not familiar with the used car market and cannot accurately estimate the value of their car. In this case, consult a professional used car trading platform or a 4S store. Compare similar models and conditions to get a rough price range, or use online or in-store evaluation methods to estimate the car's value. This helps avoid being lowballed by buyers.
7
1
Share

Can I Register a Car Purchased Out of Town in Hangzhou?

You can register an out-of-town license plate. If you are not a local resident, you need to file a record at the local public security bureau where your household registration is located, or at the Hangzhou Vehicle Management Office, before you can register an out-of-town license plate. For Hong Kong and Macau residents: Original and photocopy of a 10-year valid "Mainland Travel Permit for Hong Kong and Macau Residents" and a temporary accommodation registration certificate proving residence in Hangzhou for one year or more. For Taiwan residents: Original and photocopy of a 5-year valid "Taiwan Resident Travel Permit to Mainland," a one-year or more valid endorsement issued by the local public security authorities, and a temporary accommodation registration certificate proving residence in Hangzhou for one year or more. For overseas Chinese: Original and photocopy of a People's Republic of China passport issued by the local authorities and a household registration cancellation certificate issued by the Hangzhou public security authorities.
5
1
Share

What is the actual fuel consumption of the Kia Forte?

The fuel consumption of the Kia Forte is: 5.3L/100km. Here are the relevant details about the Kia Forte: Powertrain of the Kia Forte: The Kia Forte is equipped with a 1.6L inline four-cylinder naturally aspirated engine, which offers high fuel efficiency. It is paired with either a 6-speed manual transmission or a 6-speed automatic transmission. Body dimensions of the Kia Forte: The Kia Forte measures 4510mm in length, 1750mm in width, and 1470mm in height. It has a wheelbase of 2650mm. Features of the Kia Forte: The Kia Forte comes standard with rear parking sensors, alloy wheels, a single CD player, power windows for both front and rear, and electrically adjustable and heated exterior mirrors.
14
0
Share

What does the snowflake and 4°C display mean in Volkswagen vehicles?

When a Volkswagen vehicle displays a snowflake and 4°C, it is alerting the driver that the external temperature has dropped below 4 degrees Celsius, warning of potential icy road conditions and advising cautious driving. This feature is designed to compensate for the driver's inability to sense external temperature changes from inside the vehicle. Typically, higher-end vehicles will display a snowflake warning when temperatures fall below 4°C. When driving a Volkswagen vehicle on icy roads, it's recommended to: reduce speed and maintain steady velocity without sudden acceleration or deceleration; minimize lane changes and avoid rapid acceleration or hard braking; follow in the tracks of preceding vehicles and avoid driving near road edges; immediately release the accelerator if wheel slippage is detected; maintain sufficient distance from preceding vehicles on steep slopes to avoid stalling; reduce speed before entering curves and avoid braking during turns to prevent skidding.
2
2
Share

Is the BMW X3's on-demand four-wheel drive normally rear-wheel drive?

The BMW X3 features an on-demand four-wheel drive system based on a rear-wheel drive platform. It utilizes a transfer case with the code name ATC13, equipped with a multi-plate clutch central differential. The four-wheel drive system of the BMW X3 can continuously adjust torque distribution according to road conditions, intelligently delivering the most suitable torque to the front and rear wheels. By default, the torque distribution between the front and rear wheels is set at 40:60, with the maximum torque distribution ratio ranging from 0:100 to 100:0, and torque distribution can be completed within 0.1 seconds. How the four-wheel drive system works: When the vehicle is traveling at high speed, the system may detect potential understeer, in which case it reduces the torque allocated to the front axle, effectively transmitting almost all power to the rear axle to ensure driving stability. When the vehicle experiences wheel slip, all four wheels can achieve stronger traction under varying drive torque, thereby preventing wheel spin.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.