Is it necessary to deal with scratches on car light covers?

1 Answers
EzraMarie
07/29/25 11:30pm
It is necessary to deal with scratches on car light covers. If there are many scratches on the car light cover, it will affect the brightness of the lights during night driving, and in severe cases, it may even cause traffic accidents. Therefore, it is necessary to deal with scratches on car light covers. Repairing scratches on car lights requires professional technicians at professional beauty shops to use specialized products. Generally, polishing and restoration procedures are used to repair the scratches, aiming to restore a smooth and flat effect as much as possible. However, severe physical damage cannot be successfully repaired through beauty treatments. It is necessary to assess the damage before deciding whether to sand it. Methods for dealing with scratches on car light covers: Toothpaste polishing: If there are fine scratches on the car headlights that do not affect normal use, toothpaste can be used for polishing because toothpaste contains abrasive particles, which can help with minor scratches. Polishing repair: For longer scratches and cracks on car headlights, fine sandpaper can be used for sanding, followed by polishing with polishing wax, similar to the principle of paint polishing. Replace the light cover: If the scratches on the car light cover are severe and already affect normal driving, it is necessary to go to a professional repair shop to replace the car light cover in time.
Was this review help?
8
5
Share
More Forum Discussions

What are the differences between the Mercedes-Benz C260 and E260?

Here are the specific differences between the Mercedes-Benz C260 and E260: 1. Model type: The E-Class belongs to the mid-size car category, while the C-Class is a compact executive sedan. 2. Price: Based on the official manufacturer's suggested retail price (MSRP), there is a significant price gap between the Mercedes-Benz C-Class and E-Class, with the E-Class being more expensive. 3. Exterior and interior: The E-Class appears more spacious than the C-Class in all dimensions, particularly in wheelbase and overall vehicle length. The interior design of the E-Class also differs noticeably from that of the C-Class. 4. Features: The E-Class includes many S-Class features that are not available in the C-Class.
9
3
Share

How to Check if a Used Car is an Accident Vehicle?

Methods to determine if a used car is an accident vehicle are as follows: 1. Check the seams: Inspect whether the gaps between the hood, front bumper, trunk lid and taillights, and the rear quarter panels on both sides are even, and whether the taillights are of the same age with uniform gaps. If the lines are crooked, gaps are uneven, or decorative strips are missing or mismatched, the car may have been in an accident or undergone repairs. 2. Inspection: Check if the headlights and fog lights on both sides are of the same age, verify if the production dates on the door and window glass codes are consistent, and inspect whether the doors have been tampered with, such as signs of hinge removal. You can refer to accident vehicle identification diagrams for further guidance.
16
3
Share

What types of vehicles are suitable for a C2 driver's license?

C2 driver's license is suitable for automatic transmission vehicles with fewer than 9 seats and a vehicle length not exceeding 6 meters, including small and mini automatic transmission passenger vehicles, as well as light and mini automatic transmission cargo vehicles. The C2 driver's license examination process consists of the theoretical test (Subject 1), the field test (Subject 2), and the road test (Subject 3). The C2 driver's license Subject 2 examination includes test items such as single-plank bridge, hill start, parallel parking, reverse parking, and curve driving, with the test vehicle being an automatic transmission car. The age requirement for obtaining a C2 driver's license is 18 to 70 years old, the height requirement is above 155 centimeters, and the vision requirement is that the naked eye vision or corrected vision of both eyes reaches 5.0 or above on the logarithmic visual acuity chart.
14
1
Share

Do You Need to Press the Brake When Shifting into Reverse Gear in a Manual Transmission?

No. When shifting gears, the clutch and throttle must be well-coordinated. Press the clutch pedal all the way down, then release the throttle pedal, and quickly shift into the corresponding gear. Master the timing of gear shifting: When driving a manual transmission car, the most important thing is to master the timing of gear shifting. Shift gears when the engine speed is around 2000 RPM. First reduce the throttle and then press the clutch, so the clutch won't be forced to disengage, and then shift gears. Gear shifting sequence: The gear shifting sequence must be first gear → second gear → third gear → fourth gear → fifth gear. Skipping gears is not recommended. The downshifting sequence depends on the vehicle speed. Based on your car's condition, generally downshift when the engine speed is below around 1500 RPM.
19
4
Share

Where is the drainage hole of the Bora car door located?

The drainage holes of the Bora car door are located at the lower part of the door panel (usually 1-2 holes). Here is some additional information: 1. Generally, there are no hoses to guide the drainage at the lower part of the door panel, and rainwater directly flows through the rust-proof treated door panel for discharge. Due to the low position of the drainage holes, vehicles that frequently drive on muddy roads may find these holes easily clogged by mud, so owners should pay attention to regular checks. 2. Sometimes, the drainage holes may be blocked by rubber plugs, which should be promptly removed to allow accumulated water to drain and prevent door rust. The drainage holes are usually positioned at the lowest part of the door, allowing water to naturally flow out due to gravity. Additionally, after washing the car, it is important to check the drainage holes at the bottom of the door to ensure they are not blocked by debris, and to clean them in time to prevent rust caused by water accumulation.
12
4
Share

Why is the metal box connected to the exhaust pipe dripping water?

The reason for water dripping from the metal box connected to the exhaust pipe: After gasoline is completely burned, it produces water and carbon dioxide. At high temperatures, water exists as water vapor, which is colorless and transparent. However, when the temperature drops below 100 degrees Celsius, the water vapor condenses into water. If the condensed water droplets are suspended in the air, they appear as white gas. When the ambient temperature is low, the white smoke from the exhaust pipe is water vapor. If the condensed water droplets accumulate, they turn into water. The exhaust pipe is equipped with a device to reduce vibration and noise, facilitate installation, and prolong the life of the exhaust muffler system. It is installed between the engine exhaust manifold and the muffler, making the entire exhaust system flexibly connected.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.