···
Log in / Register

Is Fuel System Cleaning at 4S Stores Necessary?

1Answers
SanAutumn
07/29/2025, 11:48:51 AM

Fuel system cleaning is indeed necessary because gasoline contains certain impurities that can generate carbon deposits in the combustion chamber over time. As these deposits accumulate, they can impair combustion efficiency, thereby affecting engine performance and increasing fuel consumption. This can also lead to poor fuel injector atomization, resulting in issues such as reduced engine power, poor acceleration, and non-compliant exhaust emissions. Maintenance and cleaning of the fuel system: 1. Regularly add fuel system cleaners, opting for high-quality products: Generally, cleaning should be performed every 10,000 to 20,000 kilometers. The purpose is to effectively remove carbon deposits, sediments, and gum from the combustion chamber, intake valves, fuel injectors, and fuel lines during vehicle operation, ensuring the fuel system remains clean. 2. Use specialized equipment for cleaning: Non-disassembly cleaning is performed by adding a cleaning solution through a supply device, commonly referred to as "hanging an IV." The advantage is that it enables non-disassembly cleaning while the engine is running, protecting the engine and effectively avoiding damage caused by disassembly. Most 4S stores adopt this method.

Was this review help?
112
Share
More Q&A

Is it necessary to downshift to first gear every time when parking?

It is necessary to downshift to first gear every time when parking. Here are the specific reasons for downshifting to first gear: 1. Reason one: First gear provides the maximum torque, which is most suitable for moving a stationary car. However, on special road surfaces such as icy, snowy, or muddy slippery roads, second gear can be used for starting to prevent excessive torque that could cause wheel spin and make the wheels sink deeper. 2. Reason two: Generally, to save fuel, the idle speed of a car's engine is set relatively low. In this case, if second gear is used for starting, the torque would be insufficient. With excellent clutch and throttle coordination, some car models can still start, but it would be very slow, with sluggish acceleration, and a slight misstep could lead to stalling.
107
Share

How Long is the Battery Life of the Renault City K-ZE?

Renault City K-ZE is developed by the Dongfeng Renault Group, with its basic architecture based on Renault's global CMF-A small car platform. Below is a detailed explanation regarding the Renault's battery life: 1. The Renault City K-ZE is equipped with a Tianjin Lishen battery pack with a capacity of 26.8kWh, offering a maximum range of 271 kilometers under NEDC combined conditions. 2. When charging with a standard 7kW charging pile, the Renault can be fully charged in just 4 hours. 3. Additionally, the ternary lithium battery of the City K-ZE has a higher energy density compared to the lithium iron phosphate battery of the Nezha V, resulting in less degradation with repeated use, meaning a longer lifespan.
102
Share

What is the width of a sedan?

Sedans generally have a width of around 1.8m and a length of approximately 4.8m. Below is an introduction to different sedan lengths: 1. Mini cars: Typically refer to models with a wheelbase below 2400mm, such as the Chery QQ3 and Chang'an Benben. 2. Small cars: Usually refer to models with a wheelbase between 2400mm and 2550mm, such as the Honda Fit and Toyota Vios. 3. Compact cars: Generally refer to models with a wheelbase between 2550mm and 2700mm, such as the Volkswagen Sagitar and Honda Civic. 4. Mid-size cars: Typically refer to models with a wheelbase between 2700mm and 2850mm, such as the Honda Accord and Toyota Camry.
117
Share

Does frequently using manual mode in a Tiptronic transmission harm the car?

This has no impact. A Tiptronic transmission simply adds a manual shifting function to the automatic transmission, and the power transmission path in manual mode is exactly the same as in automatic mode. When using the manual mode in a Tiptronic transmission, you need to shift the gear lever to the "M" position and then perform upshifts or downshifts as needed. Here is some relevant information about manual transmissions: 1. Concept of manual transmission: A manual transmission, also known as a manual gearbox, is a type of transmission device and the most basic form of automotive transmission. 2. Function of manual transmission: The function of a manual transmission is to change the gear ratio, also known as the gear ratio. Based on the principle of leverage, it uses the largest diameter gear in the lowest gear with the longest radius to amplify the engine torque, helping the vehicle start moving forward.
118
Share

How to Check the Transmission Fluid Level?

Transmission fluid level can be checked using the transmission dipstick. Introduction to transmission fluid: Transmission fluid, also known as gear oil, is a type of transmission lubricant used for lubricating various gears in the transmission, reduction gearbox, and differential. It helps prevent gear surface wear, sintering, and other issues, prolongs service life, and improves power transmission efficiency. Operating in relatively low-temperature environments, transmission fluid is strongly alkaline. Transmission fluid replacement cycle: Generally, automatic transmission vehicles require transmission fluid replacement every 3-4 years or when the mileage reaches 60,000 to 80,000 kilometers. Manual transmission vehicles may need earlier replacement, and specific intervals can be referred to in the vehicle maintenance manual. Exceeding these time or mileage limits will significantly reduce the lubrication effectiveness of the transmission fluid, and the transmission temperature will correspondingly increase during operation.
119
Share

What to Do When the Car Air Conditioning System Is Not Cooling?

When a car's air conditioning fails to cool, it is usually due to insufficient refrigerant or minor leaks in the AC piping or condenser, which is a common issue. Below are solutions for a non-cooling car air conditioning system: 1. Simply replenish the refrigerant. 2. However, note that if adding from the low-pressure side, do not invert the refrigerant bottle. 3. If adding from the high-pressure side, do not start the engine. 4. After refilling, check for severe leaks. Additionally, pay attention to the following: enhance maintenance of AC system components, keep the condenser fins clean to ensure efficient heat dissipation; test system pressure to confirm refrigerant charge and piping condition; inspect fuses and connectors for proper operation.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.