···
Log in / Register

Is a probationary driver required to display a probationary sign while driving?

1Answers
VonMolly
09/03/2025, 10:46:01 PM

Probationary drivers are required to display a probationary sign. Specific details are as follows: 1. Fines for not displaying the probationary sign: If a probationary driver fails to affix or hang a standardized sign at the rear of the vehicle; if the sign is not clearly visible; or if the sign does not meet requirements (e.g., signs like "New Driver" or self-printed signs), it will be considered as not displaying the sign, resulting in a fine of 200 RMB. 2. Mandatory display of the probationary sign: According to Article 64, Clause 3 of "Order No. 123," probationary drivers must affix or hang a standardized probationary sign at the rear of the vehicle while driving. "New drivers" can obtain the probationary sign by presenting their driver's license at traffic violation processing windows of local traffic police departments or vehicle management offices (branches).

Was this review help?
115
Share
More Q&A

Where is the windshield washer fluid spray location?

The windshield washer fluid spray button switch is generally located on the control lever on the right side of the steering wheel. Here are the relevant details: 1. Simply pull the lever switch toward yourself to spray the washer fluid. While the fluid is being sprayed, the wipers will automatically activate to clean the windshield until you release the lever to stop the operation. 2. It is recommended to spray washer fluid before using the wipers to extend the lifespan of the wiper blades, reduce resistance during operation, and prevent scratching the windshield. 3. Note: When operating the washer fluid switch, if no fluid sprays out after pulling the lever, avoid holding the lever for an extended period as this may cause the motor to overheat and malfunction. 4. You can open the engine hood to check if the washer fluid reservoir still contains fluid. If it is empty, refill it to the appropriate level promptly. If the reservoir has sufficient fluid but the spray still doesn't work, it may indicate a damaged motor, low battery voltage, or other issues. It is advisable to have it inspected by a 4S shop or professional repair service.
102
Share

What sound does an engine make when it has cylinder scoring?

If an engine shows slight signs of cylinder scoring, the following conditions may occur when the engine is idling: 1. There is usually a ticking, ticking, ticking abnormal sound. 2. As the temperature rises, the sound becomes duller and is accompanied by engine shaking. 3. In severe cases of cylinder scoring, the engine may stall directly. Additional information: 1. Engine cylinder scoring refers to obvious longitudinal mechanical scratches and abrasions on the inner wall of the cylinder within the movement range of the piston rings. In severe cases, adhesive wear occurs, causing difficulties in starting the engine or the engine stalling on its own. 2. The root cause of cylinder scoring is the difficulty in forming an oil film between the inner wall of the cylinder and the piston rings and pistons, resulting in poor lubrication or even dry friction.
111
Share

What does SAE mean?

SAE stands for the Society of Automotive Engineers, which refers to the viscosity grade classification of gear oil. Here are the detailed explanations: 1. Gear oil can be divided into single-grade viscosity type and multi-grade all-weather type. 2. The single-grade viscosity type can be further divided into high-temperature type and low-temperature type. 3. The high-temperature type has labels like SAE90 and SAE140, where the number after SAE indicates the oil viscosity at 100°C. A larger number indicates higher oil viscosity. The low-temperature type has labels like SAE75W, where W stands for low-temperature type, and 75 is the viscosity. A smaller number indicates better low-temperature performance. 4. The multi-grade all-weather type has labels like SAE80W/90. The number before the slash indicates the low-temperature viscosity performance in winter, where a smaller number means lower low-temperature viscosity, better fluidity, and better low-temperature resistance. The number after the slash indicates the high-temperature viscosity performance, where a larger number means higher high-temperature viscosity and better high-temperature resistance.
109
Share

What is the difference between forged and cast wheels?

The differences between cast wheels and forged wheels are as follows: 1. Different manufacturing processes. (1) Casting involves melting metal into a liquid that meets certain requirements, then pouring it into a mold. After cooling, solidification, and cleaning, a casting with predetermined shape, dimensions, and performance is obtained. (2) Forging, on the other hand, uses forging machinery to apply pressure to metal blanks, causing plastic deformation to obtain forgings with certain mechanical properties, shape, and dimensions. 2. The costs of the two types of wheels also differ. (1) The casting process is relatively simple and straightforward, making it easy for mass production, so the cost is relatively lower. (2) Forging, due to its more complex procedures, has a higher production cost. 3. The strength of the two differs. Forged wheels are made through continuous hammering, resulting in very compact molecular structure and orderly arrangement. This gives them better strength and toughness compared to cast wheels, meaning forged wheels are more robust.
101
Share

What to Do When Temporary License Plates Expire?

Temporary license plates that have expired but have not yet been replaced with formal vehicle license plates can apply for an extension to continue using temporary vehicle license plates. Here are the detailed instructions: 1. An application can be made for expired temporary license plates, but the temporary driving license issued by the vehicle management office cannot exceed three times. 2. A local temporary license plate can be extended three times, which amounts to 21 days. During this period, driving is only allowed within the city and not outside the urban area. Otherwise, it will be considered as driving without a license plate. 3. To apply for temporary license plates, you need to bring the temporary permit, vehicle purchase invoice, new vehicle certificate, compulsory insurance certificate or import certificate, and copies of relevant documents to the public security authority for application. 4. The application process can be completed in about one working day, and will be postponed in case of holidays.
114
Share

What is the Difference Between 1.6T and 2.0T?

1.6T and 2.0T mainly differ in the following aspects: 1. Different maintenance costs. The 2.0T requires a larger turbo or higher turbo pressure, so the engine operates at higher temperatures and pressures, necessitating engine oil that is more resistant to high temperatures. 2. Different power outputs. The 2.0T engine delivers stronger power, with greater torque and horsepower output. Overall, it is more powerful than the 1.6T. 3. Different fuel consumption. Engines with larger displacements intake more air, requiring more fuel to mix with the air for combustion. Therefore, among turbocharged engines, the smaller the displacement, the more fuel-efficient it is. Thus, the 1.6T consumes less fuel than the 2.0T.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.