Is a Pre-Warranty Expiry Check Necessary for Cars?

What brand are the tires on the Haval H6?

Haval H6 tires are Cooper tires. The functions of tires are: 1. Support the entire weight of the vehicle and bear the load of the car; 2. Transmit traction and braking torque to ensure the adhesion between the wheels and the road surface; 3. Reduce and absorb vibrations and impact forces during driving, preventing severe vibrations and premature damage to car components; 4. Adapt to the high-speed performance of the vehicle and reduce driving noise, ensuring driving safety, handling stability, comfort, and fuel economy. Taking the 2021 Haval H6 as an example, it belongs to the compact SUV category, with body dimensions of: length 4615mm, width 1860mm, height 1720mm, a wheelbase of 2680mm, a fuel tank capacity of 58 liters, and a curb weight of 1675kg.

118

Share

Which country produces Subaru?

Subaru is produced in Japan, and its models include: Subaru Forester, Subaru STI, Subaru Legacy, Outback, Impreza, etc. Taking the 2020 Subaru STI as an example, its body dimensions are: length 4815mm, width 1840mm, height 1500mm, wheelbase 2750mm, fuel tank capacity 60L, trunk capacity 506L, and body weight 1567kg. The 2020 Subaru STI is equipped with a 2.5L naturally aspirated engine, with a maximum horsepower of 171PS, maximum power of 126kW, maximum torque of 235Nm, and is paired with a 7-speed continuously variable transmission.

102

Share

Why is the second-hand Zontes 250 so cheap?

The low price of second-hand Zontes 250 motorcycles is primarily due to severe vehicle wear. Here are key considerations for second-hand motorcycle transactions: 1. Service Years: The vehicle's age is a rigid indicator, with depreciation calculated annually at 10% of the original price. 2. Exterior Condition: A motorcycle with approximately 10,000 kilometers under normal usage typically maintains about 80% of its new appearance, which significantly influences the final selling price. 3. Wear and Tear: Signs of engine disassembly indicate substantial wear, while excessive wear on tires and sprockets suggests higher actual mileage.

106

Share

What transmission does the Corolla use?

The Corolla uses a CVT (Continuously Variable Transmission). The functions of the transmission are: 1. Changing the transmission ratio; 2. Expanding the torque and speed of the drive wheels; 3. Allowing the car to reverse; 4. Facilitating gear shifting or power output. Taking the 2021 Corolla as an example, its body dimensions are: length 4635mm, width 1780mm, height 1455mm, wheelbase 2700mm, fuel tank capacity 43L, and curb weight 1410kg. The 2021 Corolla features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 1.8L naturally aspirated engine, producing a maximum horsepower of 98PS, a maximum power of 72kW, and a maximum torque of 142Nm, paired with an electronic continuously variable transmission.

117

Share

What Are the Reasons for a Car Not Accelerating When Pressing the Gas Pedal?

Car not accelerating when pressing the gas pedal is caused by: the throttle sensor being too dirty or voltage imbalance. The working principle of the throttle is: after pressing the gas pedal, it directly controls the throttle valve, the throttle opening will increase, the amount of air entering the engine will increase, at this time the ECU will command the fuel injection system to inject more fuel, the engine speed will rise, and the car will accelerate. The reasons for abnormal noise when accelerating are: excessive engine carbon deposits, poor gasoline filtration, poor gasoline quality, aging spark plugs, engine failure, and cylinder failure. The solutions for abnormal noise when accelerating are: 1. Replace the engine oil; 2. Clean engine carbon deposits; 3. Replace spark plugs; 4. Conduct a comprehensive inspection and repair of the car.

103

Share

What are the reasons for the engine warning light in Wuling Rongguang New Truck?

There are mainly 7 reasons for the engine warning light in Wuling Rongguang: Sensor malfunction: The sensors mentioned here include coolant temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or signal interruption, the vehicle's ECU cannot accurately obtain engine data, which will trigger the engine warning light. Fuel quality issues: If fuel and engine oil are not added according to the manufacturer's requirements, it may cause engine wear and trigger the warning light. Poor mixture combustion: Poor mixture combustion can lead to engine carbon deposits or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockage can all cause poor mixture combustion in the engine. Turbocharging issues: Intake turbocharging pipes and turbochargers can also trigger the engine warning light. The most common issue is turbocharger damage, accompanied by symptoms such as oil leakage, high oil consumption, reduced power, metal noises, and blue or black smoke from the exhaust pipe. Intake issues: If there is a problem with the car's intake, it may cause engine pipe blockage, and in severe cases, trigger the engine warning light. A dirty air filter that is not cleaned regularly can lead to intake problems. Exhaust issues: Exhaust faults can also trigger the engine warning light. Rear oxygen sensor, catalytic converter, exhaust camshaft, and bearing failures are all causes of exhaust problems, with the catalytic converter being the most common. Using leaded gasoline, lead or silicon-containing lubricant additives, physical damage to the catalytic converter, or engine fuel system failures can easily cause catalytic converter issues. Anti-theft system malfunction: If the car's electronic anti-theft system fails, or if the anti-theft controller does not match the engine electronic controller, the anti-theft system can also prevent the engine from operating normally and trigger the engine warning light. If the engine warning light is on, follow these steps: First, check if the engine is running normally and if there are any issues such as shaking or black smoke. If so, avoid restarting the engine. Particularly, do not restart if the red warning light is on. If the engine can be started, turn it off for 5-10 minutes, then without pressing the brake, press the start button once or turn the key halfway to the 'on' position without pressing the clutch. The car will perform a self-check after powering on. Wait for 5-10 seconds and observe if the warning light on the dashboard turns off. If the warning light remains on, visit a service station as soon as possible to identify the cause. The service station can use a portable diagnostic tool to read the fault code, obtain fault information, and perform targeted repairs.

115

Share