
Yes, a 265/75R16 tire is generally considered a functional equivalent to a 31-inch tire, specifically a 31x10.5R15, but they are not identical. The key difference is the required wheel size: the “265” tire needs a 16-inch wheel, while the “31” tire fits a 15-inch wheel. For most light trucks and SUVs, the slight variance in overall diameter is within a safe range, allowing for practical interchangeability when also changing wheels.
Understanding the Numbers: Metric vs. Flotation Sizing The confusion stems from two different measurement systems. “265/75R16” is a metric designation: 265mm is the section width, 75 is the aspect ratio (sidewall height as a percentage of width), and R16 means it fits a 16-inch wheel. “31x10.5R15” uses inches: 31 inches is the approximate total diameter, 10.5 inches is the section width, and R15 denotes a 15-inch wheel.
Direct Size Comparison and Data While nominal, the actual mounted dimensions can vary by brand and tread pattern. According to industry data from major tire manufacturers and size calculators, the typical dimensions are:
This shows the 265/75R16 is often slightly taller, while widths are virtually identical.
Practical Interchangeability and Considerations For vehicle owners, this means the two sizes can be swapped as a set (including wheels) for most applications. The 265/75R16, with its marginally larger diameter and lower sidewall (due to the 16-inch wheel), may provide a slight edge in on-road stability and handling response. The 31x10.5R15, with more sidewall, can offer a marginally smoother ride and better air-down capability for off-road traction.
However, three critical checks are necessary:
Summary Table of Key Specifications
| Specification | 265/75R16 | 31x10.5R15 | Notes |
|---|---|---|---|
| Typical Diameter | ~31.6 inches | ~30.5-31.2 inches | 265/75R16 is often 0.5-1% taller. |
| Typical Width | ~10.4 inches | ~10.5 inches | Width difference is negligible. |
| Wheel/Rim Size | 16 inches | 15 inches | The most critical difference. |
| Common Use Case | Balanced on-road/off-road | Classic off-road & lift kits | Performance differences are minor. |

















I just went through this swap on my . Had 31x10.5R15s on it for years, wanted a newer wheel look, so I moved to 265/75R16s on new rims. The truck sits maybe a quarter-inch higher now. Honestly, on the road, I can’t feel a difference in ride or handling. The speedo was off by about 2 mph at highway speeds, which I confirmed with a GPS app. No rubbing issues for me. For my use—daily driving and forest trails—they’ve been perfect equivalents.

As a mechanic, I see this question often. The short technical answer is yes, they are functionally the same size for your vehicle’s gearing and clearance calculations. The critical point everyone must understand is the rim diameter: 16 versus 15. You are a tire and wheel package. The 265/75R16 will have a slightly shorter, stiffer sidewall due to the math of the aspect ratio on a larger rim. This can translate to marginally sharper steering response. Always check your spare tire well—if you’re carrying a full-size spare, the slightly taller 265 might not fit the factory hold-down.

If you’re looking at these two sizes, you’re likely trying to fit larger tires. Here’s the real-world take: they are considered direct swaps in the off-road and truck communities. Don’t get hung up on the “31” name. The actual measured height is what matters. Many guys running 265/75R16s will still call them “31s” because they fill the same visual space and purpose. Your choice should come down to which wheel size you prefer or have access to. Just remember to budget for four new wheels if you’re changing the rim size, and get an alignment afterward.

Let’s simplify the decision. You want either a 265/75R16 or a 31x10.5R15. Your choice depends on your wheels and your vehicle’s limits.
First, what wheels do you have or want? If you have 15-inch wheels, the decision is made: get 31s. If you have 16-inch wheels, get 265s. If you’re new wheels anyway, you can pick.
Second, check for rubbing. Search online forums for your specific vehicle’s make, model, and year. Type in “265/75R16 fitment [Your Vehicle]” and “31x10.5R15 fitment [Your Vehicle].” You’ll find photos and stories from owners who’ve done it. The 265, being a tad taller, is more likely to have a reported rubbing issue on a stock suspension.
Finally, think about use. The differences in performance are tiny. For 99% of driving, you won’t notice. The speedometer error is minor and often not worth correcting unless your local laws are strict.
So, pick based on your wheels, double-check fitment for your truck, and don’t overthink the rest. Both are excellent, nearly identical size choices.


