Here are the specific methods to start a BYD Qin when the battery is dead: 1. Borrowing a car for jump-starting. First, open the hoods of both cars. Connect the negative terminal of the charging cable to the negative terminal of your car and the other end to the negative terminal of the other car. Similarly, connect the positive terminal of the charging cable to the positive terminal of your car and the other end to the positive terminal of the other car. Then, start the other car, press the accelerator, and try to start your car. If the battery is indeed dead, your car should start quickly. After starting, keep the engine running for 15 to 20 minutes to allow the generator to charge automatically. Once the car is started, first remove the positive terminal from the other car, then remove the cable from your car. Similarly, remove the negative terminal from the other car first, then from your car. 2. Push-start method. This method requires two people. First, turn the key to the ignition position, press the clutch, release the handbrake, and put the gear in 1st or 2nd. Keep the clutch pressed and start pushing the car. When the speed reaches 5 km/h, slowly release the clutch and press the accelerator to start the car. 3. External force towing start. First, you need a sturdy tow rope to securely tie the front and rear of both cars. Then, you can start the towing process. Start slowly to ensure the speed of both cars and pay attention to driving safety. Once the rear car starts, notify the front car immediately and then slowly pull over to the roadside to park.
