How to Use Windshield Wipers in Rainy Weather?

[ElizabethRose]

Adjust the wiper mode according to the amount of rainfall. Here are the specific details: 1. INT mode: INT mode indicates automatic intermittent operation. The wiper will start working intermittently automatically. This gear requires manual reset and is suitable for light rain or snow. The rotary button is used to adjust the intermittent speed of the wiper. 2. LO mode: LO mode is the continuous operation mode. The wiper runs continuously and works automatically, suitable for heavier rain or snow. 3. HI mode: The wiper will operate continuously at high speed, generally suitable for heavy rain.

[SavannahRose]

Driving in the rain requires careful use of the windshield wipers. I make it a habit to check the condition of the wiper blades as soon as I get in the car. If I notice water streaks or unusual noises after wiping, it's a sign they need replacement. After starting the vehicle, I adjust the wiper speed according to the rain intensity: intermittent mode for drizzle, low speed for moderate rain, and high speed for heavy downpours. When the windshield fogs up, I turn on the air conditioning defogger along with the wipers to maintain clear visibility. At red lights, I remember to lower the wiper speed to prevent dry wiping and damage to the rubber blades. Every month, I clean the edges of the wiper blades with a damp cloth to remove dust and sand, which helps extend their lifespan. The most crucial aspect of driving in the rain is slowing down in advance—no matter how fast the wipers work, they can't compensate for unsafe speeds.

[KaiMarie]

As someone who frequently drives long distances, I have my own set of methods for using wipers in the rain. Before driving, I always spray windshield washer fluid to test the wiper performance and ensure the spray nozzles aren't clogged. For light rain, I use the intermittent mode to save power and reduce noise; when the rain gets heavier, I switch to continuous mode. Special attention is needed when driving at night in the rain—I set the wipers to medium speed to avoid glare caused by rapid wiping that could impair visibility. If the windshield has oil film buildup, visibility becomes worse in the rain, so I regularly treat it with a dedicated cleaner. I replace my wiper blades every six months without fail, as aged rubber significantly reduces wiping effectiveness. Lastly, a reminder: during heavy rain, don’t rely solely on automatic rain-sensing wipers—manual adjustment is more reliable.

[Elaine]

In my early days, I was always confused about how to use the wipers, but now I'm much more proficient. Pushing the control stalk on the right side of the steering wheel upwards activates a single wipe, while pulling it down engages continuous operation. The intermittent mode is most suitable for light rain, low speed for moderate rain, and high speed is only needed for heavy downpours. Remember to turn on the rear wiper, especially when reversing. If the windshield fogs up, immediately turn on the air conditioning to defog, which works better when combined with the wipers. If the wipers jump or make unusual noises, it's likely that the rubber blades are worn out. I make it a habit to check the wiper blades every three months and try to lift them up when parked to prevent the rubber from deforming. Always use dipped headlights when driving in the rain to make your vehicle more visible to others.

[GrantLynn]

Using windshield wipers requires as much care as looking after your eyes. Every time I get in the car, I first spray washer fluid to wet the windshield before turning on the wipers to avoid dry wiping that could damage the rubber blades. Adjusting the speed according to the rain intensity is crucial: use the slowest setting for scattered raindrops, medium speed for moderate rain, and fast oscillation only during heavy downpours. When the windshield fogs up, activating the defogger function simultaneously yields the best results. It's advisable to replace wiper blades twice a year, once each in spring and autumn, as rubber tends to age faster in seasons with significant temperature variations. When parking, I make it a habit to lift the wipers away from the glass, especially after prolonged exposure to summer sun. Additionally, maintaining a longer following distance is essential during rainy drives since braking distance increases considerably compared to dry conditions.

[Barros]

Hyundai's wiper function is quite intelligent, but it's still essential to master the basic operations. The control stalk is located on the right side of the steering wheel—push it downward to select speed settings. For light rain, intermittent mode is most convenient; use low-speed continuous mode for moderate rain, and push it directly to high-speed mode during heavy downpours. The rear wiper button is usually at the top of the stalk, especially useful when reversing in the rain. If the windshield fogs up, remember to turn on the AC defrost function—combining it with the wipers doubles the efficiency. I check the elasticity of the wiper blades every quarter and replace them immediately if hardening is detected. If parking for more than three days, I lift the wipers to prevent the rubber from sticking to the glass. For rainy-day driving, it's advisable to turn on both front and rear fog lights to increase visibility to other vehicles.