How to Use the Manual Mode in Trumpchi's Tiptronic Transmission?

What is the correct sequence for washing a car?

The correct sequence for washing a car involves rinsing off dirt with slow water flow, applying car wash soap, cleaning stains, rinsing and drying, and cleaning the tires. The detailed steps are as follows: Rinsing off dirt with slow water flow: Most dirt on a car's surface consists of dust, mud, and oil stains. First, rinse off visible dust before tackling stubborn stains. Before washing, use slow-flowing water to rinse off dust and mud from the surface. High-pressure water jets combined with dirt can cause scratches and fine marks on the car's paint. Applying car wash soap: Alkaline detergents like soap water, laundry detergent, or dishwashing liquid can reduce the gloss of the car's paint, making it appear dull. Always use specialized car wash soap with a balanced pH level that won't damage the paint while effectively removing dirt. Cleaning stains: Use soft materials like car wash sponges, microfiber towels, or wash mitts to clean stains on the car's surface. For stubborn stains, apply more car wash soap and let it sit for a few minutes before scrubbing, which makes cleaning easier. Always wash from the top of the car downward. Rinsing and drying: After washing, rinse off the soap thoroughly with water—high-pressure jets can improve efficiency. Then, dry the car with a soft, absorbent towel, such as a chamois or microfiber cloth. Leaving water droplets can cause water spots, which may lead to localized high temperatures under sunlight and damage the paint. Cleaning the tires: Tires also need cleaning. First, remove small stones stuck in the tread grooves, then rinse off fine sand particles. Use a stiff brush to scrub stubborn dirt on the rims and tires before rinsing them clean.

102

Share

Where is Higer Auto Produced?

Higer is a brand under King Long United Automotive Industry (Suzhou) Co., Ltd., established in 1998. Through arduous exploration and hard work, Higer buses now cover 94 countries and regions worldwide. Additional information: 1. About Higer: Higer Auto was established in 2010 as the light vehicle division of Suzhou King Long. Its main products include three categories: the new Higer Hiace, European-style commercial vehicles, and pickup trucks. Higer Auto operates relatively independently, with its main production base located in the Suzhou Industrial Park, Jiangsu Province. By the end of 2012, a second base covering 1,100 acres in the Kunshan High-Tech Development Zone was officially put into operation, mainly manufacturing Higer pickup trucks and the new Higer Hiace products. 2. Market Potential: By the end of 2012, Higer Auto had over 600 employees. The Kunshan second production base has a designed capacity of 60,000 units, with annual sales approaching 10,000 units, indicating huge market potential.

113

Share

What Causes the Exclamation Mark on the Dashboard?

There are five possible scenarios when an exclamation mark appears on the car dashboard: general malfunction, automatic transmission failure, brake system failure, abnormal tire pressure, and lighting malfunction. Below is a detailed analysis of these five situations: General Malfunction: An exclamation mark inside a triangle indicates a general performance or component/function failure in the vehicle. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor malfunction. It is necessary to visit a 4S shop for inspection to identify the source of the problem. Automatic Transmission Failure: A yellow gear with an exclamation mark inside is the automatic transmission failure warning light, indicating a transmission malfunction or transmission fluid level below the normal range. Transmission fluid should be replaced promptly. Brake System Failure: An exclamation mark inside a circled parenthesis represents a brake system warning, typically indicating brake system failure or low brake fluid level. Immediate inspection and repair of the brake system are required to prevent accidents. Abnormal Tire Pressure: An exclamation mark below a horizontal line inside a parenthesis is the tire pressure monitoring warning light, which illuminates when the tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Malfunction: A yellow bulb with an exclamation mark is the lighting malfunction indicator, signaling a fault in one of the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to pinpoint the issue.

115

Share

Where is the BMW tow hook located?

The tow hook for the vehicle is located inside the trunk or in the onboard tool kit. According to the "Motor Vehicle Registration Regulations" issued by the Ministry of Public Security, small and micro passenger vehicles are allowed to install front and rear anti-collision devices. Installing a tow hook is legal as long as it complies with the regulations for the specific vehicle model. Additional Information: Article 56 of the "Road Traffic Safety Law Implementation Regulations" stipulates the following requirements for motor vehicles towing trailers: 1. Trucks, semi-trailer tractors, and tractors are only allowed to tow one trailer. The lighting signals, brakes, connections, and safety protection devices of the trailer must comply with national standards. 2. Small passenger vehicles are only allowed to tow travel trailers or trailers with a total mass of less than 700 kilograms. Trailers must not carry passengers. 3. The load capacity of the trailer towed by a truck must not exceed the load capacity of the truck itself. 4. Large and medium-sized passenger vehicles, low-speed trucks, three-wheeled vehicles, and other motor vehicles are not allowed to tow trailers.

119

Share

What are the exterior design features of BMW?

BMW's exterior design features are as follows: 1. Double-kidney grille. Commonly known as the pig nostrils. 2. Long hood, due to the 50:50 weight distribution, the cabin is positioned in the middle. 3. Shark fin antenna. 4. Angel Eye daytime running lights. 5. Hofmeister kink (window corner). 6. L-shaped taillights. Additional information: BMW turbocharged engine: 1. An engine that uses a turbocharger to increase air intake. The turbocharger (Turbo) is essentially an air compressor. 2. It utilizes exhaust gases from the engine to drive the turbine (located in the exhaust passage), which in turn drives the coaxial impeller (located in the intake passage). The impeller compresses fresh air from the air filter and delivers it to the cylinders. 3. As the engine speed increases, the exhaust gas flow and turbine speed also increase, enhancing air compression and thereby increasing the engine's air intake. This results in higher engine output power.

119

Share

Where to Insert a Car USB Drive?

Some USB drives are inserted into the car's center console, while others are placed in the car's storage compartment. The location for inserting a USB drive varies depending on the type of vehicle. The USB port in a car has two functions: one is to charge mobile phones, and the other is to play music using a USB drive. Some car models do not have a charging function, so you may need to purchase a cigarette lighter car charger as an alternative. Precautions for Using a Car USB Drive: 1. Pay Attention to Music Format: The music formats that a car can recognize are MP3 or WMA. When downloading music, be sure to check the file format. If the music format is incorrect, the car's system will not recognize it. 2. Place Music Files in the Root Directory: Try to store music files in the root directory of the USB drive. If they are placed too deep, the car's system might not be able to locate them. Additionally, some car systems may not support USB drives with excessively large capacities, especially in older car models. Therefore, it is advisable to use a smaller-capacity USB drive for storing music.

110

Share