···
Log in / Register

How to use the M gear in Geely Boyue?

1Answers
ORowan
07/29/2025, 05:25:55 AM

Geely Boyue M gear usage method is to directly shift into the leftmost M gear while driving or starting, then push up to increase the gear and push down to decrease the gear, achieving manual transmission function. There is no need and it is not possible to press the brake during gear shifting. Related introduction about M gear is as follows: 1. Introduction one: The function of M gear is to increase the driving pleasure of the vehicle and also make driving more free. M gear refers to the manual mode of the automatic transmission or the simulated manual mode of the CVT transmission. 2. Introduction two: When the gear lever is shifted into M gear, gear shifting becomes manually completed by the driver. There will be "+" or "-" symbols near the M gear, "+" represents upshift, "-" represents downshift, or gear shifting can be done through the steering wheel paddle shifters.

Was this review help?
107
Share
More Q&A

What Does It Mean When the Vehicle's Water Temperature Warning Light Comes On?

Water temperature warning light comes on means the vehicle's water temperature is too high. Here is a detailed introduction about high water temperature in vehicles: 1. Reasons for high water temperature: Generally, high water temperature is caused by the antifreeze not being replaced for a long time or a malfunction in the antifreeze circulation. Water-cooled engines require antifreeze to continuously circulate within the engine for heat dissipation. 2. Antifreeze circulation path: There are two circulation paths for antifreeze in the engine, one is the large circulation, and the other is the small circulation. When antifreeze is in small circulation, it does not pass through the radiator, while in large circulation, it passes through the radiator for heat dissipation. When the engine is just started, the temperature is relatively low, and the antifreeze will perform small circulation, which helps the engine to cool down quickly. After the engine reaches the normal operating temperature, the antifreeze will perform large circulation, maintaining the engine within the normal operating temperature range.
118
Share

How Often Should the Transmission Fluid in an Automatic Car Be Changed?

Automatic transmission fluid should be changed every 2 years or 40,000 kilometers. Transmission fluid, also known as gear oil, is used to keep the gear system clean, lubricate the transmission components to extend their lifespan, and provide effective lubrication even in low-temperature conditions. It also helps reduce oil loss under harsh operating conditions. Maintenance methods for transmission fluid: 1. Change the fluid regularly. 2. Frequently check the fluid level. 3. Avoid coasting in neutral. 4. Avoid skipping gears when upshifting. 5. Do not force the transmission into neutral. 6. Minimize the time spent idling to warm up the car. 7. Avoid gear grinding when shifting. 8. Clean the transmission regularly.
117
Share

Why can't the Kicks' Bluetooth connect?

The reason why the car Bluetooth cannot connect to the phone is that the mobile device has moved out of the communication range of the car Bluetooth, and the distance is too far to receive the signal; the car Bluetooth module has a problem, or the phone's Bluetooth function is faulty. Here is some relevant information about car Bluetooth: 1. Operating principle: It realizes the wireless conversion of sound from the phone to Bluetooth earphones or Bluetooth speakers through Bluetooth wireless audio transmission. Because drivers cannot conveniently answer calls directly with their phones, this product is mostly used by drivers. 2. Main functions: The Bluetooth hands-free system is an in-vehicle wireless hands-free system designed and developed based on wireless Bluetooth technology. Its main function is to connect with the phone via Bluetooth technology for hands-free calls during normal driving, reducing the risk of traffic accidents.
113
Share

Can a 125cc motorcycle use car engine oil?

125cc motorcycles cannot use car engine oil. Here is a detailed explanation of the reasons why 125cc motorcycles cannot use car engine oil: 1. Different structures: A car's engine is lubricated separately from other components, while a motorcycle's engine shares lubrication with other parts. Therefore, car engine oil and motorcycle engine oil operate on different principles. Improper use may cause wear to the motorcycle. 2. Different cooling effects: A car engine dissipates heat using a radiator, whereas a motorcycle relies solely on air cooling, which is significantly less effective. Additionally, a motorcycle's oil capacity is smaller than a car's, further limiting its cooling performance. As a result, the cooling requirements for motorcycle engine oil differ from those of car engine oil. 3. Different lubrication effects: Motorcycles generally operate at higher RPMs than cars, so the oil used in motorcycles must meet specific lubrication requirements. Using car engine oil without consideration may lead to excessive wear on the motorcycle.
104
Share

What is the difference between 91v and 94v?

Here is a detailed introduction to the differences between 91v and 94v: 1. Load Index: 91 indicates a tire load index of 615kg, while 94 indicates a maximum load capacity of 670kg. 2. Similarity: The 'V' in both refers to the speed rating, with a maximum speed of 240km/h. Below is additional information about tire functions: 1. Load-bearing: Supports the entire weight of the vehicle, withstands the vehicle's load, and transmits forces and moments in other directions. 2. Transmission: Transmits traction and braking torque, ensuring good adhesion between the wheel and the road surface, improving the vehicle's power, braking, and off-road capabilities. Works with the vehicle's suspension to mitigate impacts during driving and dampen vibrations. 3. Vibration damping: Protects vehicle components from severe vibrations and premature damage, adapts to the vehicle's high-speed performance, reduces driving noise, and ensures safety, handling stability, comfort, and fuel efficiency.
101
Share

What are the precautions for parking in snowy weather?

Precautions for parking in snowy weather are as follows: Do not use the handbrake: In snowy or rainy weather, after driving, there may be some water accumulation in the brake discs and calipers. If the handbrake is applied, the accumulated water may freeze when the temperature drops at night. When starting the vehicle the next day, this can easily damage the braking system. Depending on the slope of the road, you can choose to leave the car in forward or reverse gear. For automatic transmission cars, bricks or wooden blocks can be placed under the wheels. Protect the headlights and windows: After a night of snowfall, the windshield may be covered with a thick layer of snow, making it troublesome to clean the next morning. Before parking, you can place a large dry towel on the glass, so that the next morning you can simply remove the towel. At the same time, the headlights should also be protected. In snowy weather, the low temperature can cause snow on the headlights to freeze, making it difficult to clean when needed. Avoid using car covers if possible: Many people buy car covers for their vehicles, but it is best not to use them in heavy snowfall. The accumulated snow can become very thick and heavy, making it difficult to remove the cover when you need to use the car. Even if you manage to remove the cover forcibly, it may damage the cover.
111
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.