How to use the fog lights on the Nissan Qashqai?

1 Answers
Ian
07/30/25 5:03am
To use the fog lights on the Nissan Qashqai, turn the light control knob on the right side of the steering wheel to the lower right position. The functions of fog lights are: 1. Front fog lights are used to improve illumination when road conditions ahead are unclear and to alert oncoming drivers; 2. Rear fog lights allow vehicles behind to spot the car in low visibility conditions. Taking the 2019 Nissan Qashqai as an example, its body dimensions are: length 4401mm, width 1837mm, height 1593mm, wheelbase 2646mm, front track 1585mm, rear track 1581mm, fuel tank capacity 57l, and trunk capacity 486l.
Was this review help?
9
4
Share
More Forum Discussions

How to remove the wrench icon on Hanteng X5?

The method to remove the wrench icon on Hanteng X5: 1. Turn off the ignition switch to cut off power to the vehicle; 2. Press and hold the long rod button at the lower right corner of the instrument cluster; 3. Turn on the ignition switch to power the vehicle (without starting the engine); 4. While keeping the long rod button on the instrument cluster pressed, step on the brake pedal; 5. Wait for about 5 seconds to clear the wrench icon. Taking the 2020 manual comfort version of Hanteng X5 as an example, its body dimensions are 4501mm in length, 1820mm in width, and 1648mm in height, with a wheelbase of 2600mm. This model is equipped with a 1.5L turbocharged engine, delivering a maximum power of 115kW and a maximum torque of 215Nm.
7
0
Share

How to Disassemble a Tiguan Key?

Tiguan key disassembly method: First, pull out the mechanical key from the car key. After removing the mechanical key, you can see an opening mark at the bottom of the key. At this point, use a small screwdriver to turn the opening mark at the bottom by 90 degrees, then rotate the outer shell of the key to disassemble it. Taking the 2021 Tiguan L as an example, it belongs to the mid-size SUV category, with body dimensions of 4712mm in length, 1839mm in width, and 1673mm in height, a wheelbase of 2791mm, a fuel tank capacity of 60 liters, and a curb weight of 1650kg. This vehicle is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 186PS, a maximum power of 137kW, a maximum torque of 320Nm, and is paired with a 7-speed dual-clutch transmission.
13
5
Share

What are the steps for keyless start in a manual transmission car?

Manual transmission keyless start steps are: 1. After the driver sits in the driver's seat, press the start button once to activate the ACC light, then press it again for vehicle self-check; 2. Depress both the brake and clutch pedals, then press the one-touch start button to ignite the engine; 3. Release the foot brake, you may choose to warm up the vehicle while stationary; 4. Depress the foot brake again, shift into D gear, and release the handbrake (for electronic parking brakes, simply press the button briefly); 5. Gradually release the foot brake, apply some throttle, and complete the starting process. Manual transmission gears can be categorized as: 1. First gear is the starting gear for vehicle launch; 2. Second gear is the passing gear; 3. Third gear is the transition gear; 4. Fourth gear is the cruising gear; 5. Fifth gear is the high-speed gear.
7
0
Share

What Causes a Car's Water Temperature to Be Too High?

The reasons for a car's water temperature being too high are: 1. Insufficient coolant in the engine cooling system; 2. Malfunction of the thermostat, leading to excessive water temperature; 3. Abnormal operation of the cooling fan, resulting in poor heat dissipation of the coolant; 4. Failure in the water pump's operation, causing the pump to rotate improperly; 5. Engine oil entering the radiator. The solutions for high car water temperature are: 1. Pull over to the roadside; 2. Cover the radiator cap with a multi-folded wet cloth, then slightly unscrew the cap to allow steam to slowly escape; 3. Monitor the dashboard's water temperature gauge and, once the radiator pressure decreases, add cold water or coolant.
20
2
Share

What Causes Steering Wheel Vibration When Driving at 120 km/h?

Steering wheel vibration when driving at 120 km/h can be caused by: 1. Force feedback effect; 2. Issues with the vehicle's tires; 3. Deformation of the front wheel rims or unequal number of tire bolts; 4. Loose installation of transmission system components; 5. Bent drive shaft, power imbalance, or deformation of the front axle; 6. Shock absorber malfunction. The function of the steering wheel is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. The proper way to operate the steering wheel is: 1. Place both hands appropriately on the 9 o'clock and 3 o'clock positions of the steering wheel with moderate force; 2. Naturally grip the wheel with fingers inward and extend thumbs naturally along the edge of the steering wheel.
11
4
Share

Is the Mustang front-wheel drive or rear-wheel drive?

The Mustang is rear-wheel drive. Currently, all Mustang models imported into the domestic market adopt a front-engine, rear-wheel-drive design. Front-engine, rear-wheel drive refers to a relatively traditional drivetrain layout where the front wheels are responsible for steering, while the rear wheels handle the vehicle's propulsion. In this configuration, the engine's power is entirely transmitted to the rear axle, driving the rear wheels to move the car forward. Taking the 2018 Mustang T80 as an example, it is a compact SUV with dimensions of 4650mm in length, 1835mm in width, and 1715mm in height, featuring a wheelbase of 2665mm and a curb weight of 1665kg. This model is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 204 PS, a peak torque of 280 Nm, and a top power output of 150 kW, paired with a 6-speed dual-clutch transmission.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.