How to Use the Engine Start-Stop Function in Highlander?

At what tire pressure level should a car not be driven?

A car should not be driven when the tire pressure is below 1.0 bar, and the vehicle will issue a warning if the tire pressure falls below 1.5 bar. Hazards of excessively high or low tire pressure: 1. Shortened tire lifespan; 2. Increased friction coefficient with the road surface; 3. Creates unsafe driving conditions by making the vehicle prone to drifting; 4. Increased movement in various parts of the tire, leading to abnormal heat generation due to excessive rolling; 5. Multiplied friction between the tire and the ground, causing a sharp rise in tire temperature, softening of the tire, and a rapid decrease in strength; 6. Risk of tire blowout; 7. Accelerated rubber aging, broken cords, and faster wear on the tire shoulders.

120

Share

How to Replace the Fog Light Grille on a BMW 3 Series?

The method for replacing the fog light grille on a BMW 3 Series is as follows: 1. Remove the bumper; 2. Unscrew the bolts and take off the fog light grille; 3. Install the new grille in the reverse direction; 4. Tighten the bolts and reinstall the bumper. The BMW 3 Series is a mid-size car with body dimensions of length 4719mm, width 1827mm, height 1459mm, a wheelbase of 2851mm, and a fuel tank capacity of 59 liters. The BMW 3 Series is equipped with a 2.0T turbocharged engine, delivering a maximum power of 115kW, with the maximum power rpm ranging from 4500 to 6500 per minute.

103

Share

How to Adjust the Time on a Car Dashboard?

The method to adjust the time on a car dashboard is: 1. Press the left button, and when the time on the trip computer flashes, press the right SET button; 2. Pressing SET adjusts the time once, while holding down the SET button makes the time digits jump quickly. Adjust the time by using both buttons in combination. The car dashboard is a device that reflects the working conditions of various vehicle systems, featuring multiple indicator or warning lights, including: coolant level warning light, fuel level indicator, washer fluid level indicator, charging indicator, high/low beam indicator, transmission gear indicator, anti-lock braking system (ABS) indicator, traction control indicator, and airbag warning light.

115

Share

Should the Clutch Be Released Slowly When Shifting to Second Gear?

There are two scenarios regarding whether the clutch should be released slowly when shifting to second gear, as detailed below: 1. Shifting from a lower gear to a higher gear: In this case, there is no need to release the clutch slowly. However, it is important to remember that the shift should only occur when the vehicle speed reaches the appropriate shifting speed. At this point, releasing the clutch quickly or slowly during upshifting will not significantly affect the vehicle, as the speed has already increased and the car won't stall. Therefore, in this scenario, whether the clutch is released quickly or slowly has minimal impact on the shifting process, and the transition will be relatively smooth. 2. Shifting from a higher gear to a lower gear: In this situation, the clutch should be released slowly. Downshifting requires the speed to decrease, and releasing the clutch too quickly can cause a noticeable jerk. Hence, after shifting, it is advisable to release the clutch slowly to allow the car a transition period. Additionally, if the vehicle speed is relatively high when downshifting, it is best to lightly apply the brakes to reduce the speed first, which is also beneficial for the transmission.

102

Share

What Causes the Malfunction Light to Flash and the Car to Shake?

The reasons for the malfunction light flashing and the car shaking are as follows: 1. Ignition system failure: Issues such as faulty spark plugs, high-voltage wires, or ignition coils can lead to poor ignition system performance. In this case, the engine malfunction light will illuminate, and the vehicle may also experience shaking. 2. Overly rich air-fuel mixture in the cylinders: An excessively rich mixture in the cylinders can cause symptoms like knocking and shaking. 3. Abnormal fuel supply pressure: This is usually due to irregular fuel pump pressure, which can also result in car shaking.

101

Share

What is the matching standard between gear shifting and speed?

Different gears are suitable for different speeds. Here are the detailed explanations: 1. Gear matching standards: (1) 1st gear: Used for normal starting or climbing very steep slopes, with a speed generally around 10km/h; (2) 2nd gear: A transitional gear for acceleration after starting or for low-speed driving, with a speed generally around 20km/h; (3) 3rd gear: Used when the speed is between 20-40km/h, commonly used for urban driving; (4) 4th gear: Used when the speed is between 40-60km/h; (5) 5th gear: Can be used when the speed reaches 60km/h. 2. Precautions: The most important thing when driving a manual transmission car is to master the timing of gear shifting. The upshift sequence must be 1st gear → 2nd gear → 3rd gear → 4th gear → 5th gear, and skipping gears is not recommended. The downshift sequence depends on the speed, and generally, when the engine speed is below around 1500 rpm, you should downshift according to your car's condition.

104

Share