How to Use the Cruise Control on the URV?

What engine does the Atenza use?

The Atenza is equipped with a PY engine model, delivering a maximum horsepower of 192 HP, a maximum power output of 141 KW at 6100 rpm, and a peak torque of 252 Nm. The Atenza's engine is imported from Japan and incorporates Mazda's SKYACTIV technology. For daily maintenance of the Atenza's engine, the following methods can be applied: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment in the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard being no lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will deteriorate during use. After a certain mileage, performance degradation can lead to various engine issues. To prevent malfunctions, change the oil regularly according to usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the relief valve and carry contaminants back to the lubrication points, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Periodically use a radiator cleaner to flush the radiator. Removing rust and scale deposits not only ensures normal engine operation but also extends the overall lifespan of the radiator and engine.

13

1

Share

What is the fuel tank capacity of the Trax in liters?

The Trax offers a total of 5 models, all with a fuel tank capacity of 40 liters. The vehicle is equipped with two engine options: a 1.0-liter turbocharged engine and a 1.3-liter turbocharged engine. Transmission choices include a 6-speed automatic transmission and a continuously variable transmission (CVT). All models feature front-wheel drive. In comparison to vehicles in the same class, the 2020 Song PLUS has a fuel tank capacity of 60 liters, the 2021 Song Pro has a capacity of 63 liters, and the 2022 Kicks has a capacity of 41 liters. During actual refueling, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the manufacturer measures the volume from the bottom of the tank to the safety limit. There is still some space from the safety limit to the tank opening, which is designed to allow for fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated tank capacity. To check the remaining fuel level, drivers can observe the fuel gauge on the right side of the instrument panel, marked with E (Empty) and F (Full). When the needle is close to E, it indicates that the fuel is nearly depleted, while proximity to F indicates sufficient fuel.

7

2

Share

Is Failure to Start a Common Issue with Changan Vehicles?

There are two scenarios for failure to start: one where you can hear the starter motor turning but the engine fails to start, and another where there is no sound after turning the key. The first scenario involves the starter working but the engine not functioning. This situation is complex as it could stem from one of multiple faults. Possible causes for engine failure could be electrical or electronic faults. What occurs is unexpected and without any prior warning. Electrical faults include blown fuses, open circuits in the high-voltage coil, open circuits in the low-voltage circuit, detachment of the central ignition wire, distributor leakage, or damaged spark plugs. Electronic faults mainly refer to failures in the central computer control panel. Then there are stalls caused by fuel system faults, which often come with symptoms like engine weakness or a spongy throttle. Possible fuel system fault areas include fuel pump failure, fuel line blockage, clogged fuel filter, carburetor malfunction, or damaged fuel injectors. Sometimes, running out of gasoline can happen without the owner's knowledge. Adding a few liters of gasoline can resolve all issues. Finally, mechanical faults could be the culprit. Common mechanical faults include timing belt breakage or cylinder pressure leakage. The second scenario is when the starter hardly works. In this case, the first thing to check is the battery or accumulator.

18

5

Share

How to Adjust a Slightly Misaligned Car Steering Wheel?

Here are the methods to adjust a slightly misaligned car steering wheel: Measure Tire Pressure: A slightly misaligned steering wheel is generally related to tire pressure, tire wear, chassis component wear, and wheel alignment. First, measure the tire pressure. When the tire pressure on both sides is inconsistent, the vehicle will tend to drive toward the side with lower pressure. Check Chassis Components: If there are no issues with the tires, inspect the condition of the chassis components. Changes in wheel alignment values can also cause the steering wheel to become misaligned after some use. Additionally, the tie rod may shift to one side, leading to steering wheel misalignment. Adjust the Tie Rod: If the steering wheel is tilted to the left, extend the tie rod outward on the left wheel and shorten it inward on the right wheel. Conversely, if the steering wheel is tilted to the right, do the opposite. For the rear tie rod, if the steering wheel is tilted to the left, shorten the tie rod outward on the left wheel and extend it inward on the right wheel. Conversely, if the steering wheel is tilted to the right, do the opposite.

15

1

Share

Where is the ETC generally installed on the windshield?

The ETC installation position is generally in the upper middle part of the front windshield horizontally, while for large vehicles such as trucks and buses, the installation position is in the lower middle part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 and 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof film, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave sunroof strip. ETC stands for Electronic Toll Collection. To apply for it, the vehicle owner needs to provide their valid ID card and the original and photocopy of the vehicle registration certificate. If the application is handled by a proxy, the proxy's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page stamped with the most recent annual inspection seal. A bank card for deducting highway tolls is also required, and the vehicle must be registered under the name of an individual aged between 18 and 60. Documents required for company vehicles: Introduction letter from the vehicle owner (with official seal); photocopy of the organization code certificate or business license (with official seal); original ID card of the agent; original vehicle registration certificate; the vehicle for which ETC is to be installed. Below are precautions for ETC installation: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have a large inclination angle of the windshield, which can reduce the driver's field of vision. If this is not considered during ETC installation, it may increase the driver's blind spots. Installing it behind the rearview mirror on the right side can avoid obstructing the view. Do not affect charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Do not remove it arbitrarily once installed: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After the electronic tag is installed, the windshield will press the anti-removal lever in. If the tag is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. In such cases, you will need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device.

20

0

Share

Can ETC be hacked?

There is a risk of ETC being hacked, so it is recommended to remove the ETC card when parking to prevent unauthorized transactions. ETC Usage Precautions: The ETC transaction sensing range is 8 meters. When encountering a stationary vehicle ahead, to prevent the vehicle's ETC device from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters from the vehicle ahead to avoid automatic sensing and paying for the vehicle in front. The speed limit for ETC lane recognition is 20km/h. If the vehicle speed is too fast, the vehicle device information cannot be read, which will also result in failed deductions. Unauthorized removal or movement of the OBU device, or detachment or loosening of the ETC electronic tag, will cause the electronic tag to become invalid. It can be sent to the bank where the ETC card was issued or the highway service office for inspection. If the detachment or loosening is not due to human factors, it only needs to be reactivated. When using a debit card linked to ETC, insufficient balance will also result in failed deductions. Follow the guidance of on-site staff to use the manual MTC lane and pass by cash or card. Poor signal reception due to overly thick car windshields. This is especially important for vehicles that have had their windshields replaced after an accident or for those who have modified their front windshields.

4

0

Share

How to Use the Cruise Control on the URV?

What engine does the Atenza use?

What is the fuel tank capacity of the Trax in liters?

Is Failure to Start a Common Issue with Changan Vehicles?

How to Adjust a Slightly Misaligned Car Steering Wheel?

Where is the ETC generally installed on the windshield?

Can ETC be hacked?

What are the differences between Skoda Octavia and Buick Verano Pro?

How Long Does the Volvo 48V Mild Hybrid Battery Last?

What are the body dimensions of the RAV4?

How many cylinders does the Jetta engine have?