···
Log in / Register

How to Use the ACC Adaptive Cruise Control in Accord?

6Answers
DiPresley
07/29/2025, 02:27:46 PM

Press the power button to activate the system, at which point the cruise control indicator light on the dashboard will illuminate. Accelerate to the desired speed (above 40km/h), then press the SET button. You can now release your right foot from the accelerator pedal as the speed is set at the current velocity. Press "RES+" to increase speed from the current setting, or press "SET-" to decrease speed from the current setting. The power button, cancel button, set current speed, resume set speed, and acceleration functions are generally grouped with the RES button, while deceleration is grouped with the SET button.

Was this review help?
119
Share
SanKate
08/14/2025, 07:21:42 AM

The Honda Accord's ACC cruise control is particularly easy to use. As a new owner last year, I was initially a bit afraid of making mistakes, but after trying it a few times, it became smooth. First, start the car, press the ACC button on the steering wheel, and the dashboard light will indicate activation. Then, use the plus and minus buttons on the steering wheel to set the cruising speed, such as 110 km/h on the highway. Next, adjust the following distance—the buttons are usually on the left side of the steering wheel—I set it farther for safety. While driving, the system automatically detects the car ahead and controls the speed, slowing down when there's a car and accelerating back to the set speed when there isn't. The key is not to take your hands off the wheel; the system has a detection device that will beep to remind you to take over if you let go for too long. I don’t use it in rainy weather or heavy traffic, as the radar might be affected and prone to issues. After using it a few times, you’ll get the hang of it, and driving fatigue is significantly reduced.

Was this review help?
1
Share
Expand All
Gerald
08/14/2025, 07:22:15 AM

I've been driving an Accord for over a decade, and ACC is a must-have for my long trips. The operation isn't complicated at all—just press the ACC switch after starting the vehicle, then use the steering wheel to set the speed and maintain the following distance. I usually set it to a medium distance to avoid frequent braking, as the system handles acceleration and deceleration effortlessly. But remember, it's not fully autonomous—keep your eyes on the road and be ready to brake, especially during highway lane changes or when obstacles appear. I don’t recommend using it in the city due to heavy traffic and the risk of rear-end collisions. In bad weather, turn off ACC—safety first. This feature makes a three-hour drive feel as easy as a walk.

Was this review help?
17
Share
Expand All
VanLandon
10/14/2025, 02:13:28 AM

The ACC function is really enjoyable to use. After pressing the start button and setting the cruising speed, the system uses radar sensors to monitor the vehicle ahead and automatically adjusts speed and distance. There are distance adjustment buttons on the steering wheel with three levels to choose from—close range for quicker response and long range for more stability. The principle involves real-time feedback control of speed, but sensors may misjudge in strong light or foggy conditions, so drivers must always stay alert and intervene when necessary. Pressing the accelerator or brake will pause ACC while in use, and it resumes upon release. Try it on urban expressways to familiarize yourself with the system’s behavior and enjoy the fun of tech-driven driving.

Was this review help?
3
Share
Expand All
DeLane
11/27/2025, 02:08:51 AM

Safety first with ACC. Before starting, ensure the vehicle is in good condition. Press the ACC button to activate the system, set the speed, and adjust the following distance. Keep your hands on the steering wheel at all times and be ready to take control, especially in curves or when the vehicle ahead brakes suddenly—avoid distractions. Do not use ACC in severe weather conditions like heavy rain, as the sensors may fail. The system is only an assistive driving tool, not autonomous driving, and is effective only on smooth highways. Use it frequently but always prioritize human control to prevent accidents.

Was this review help?
1
Share
Expand All
VonIvan
01/17/2026, 03:36:36 AM

Daily commuting with the Accord's ACC helps me avoid fatigue. Three simple steps: press the ACC button to set speed and adjust following distance. On highways, it automatically maintains speed by balancing acceleration and deceleration for fuel efficiency and peace of mind. I must remind myself not to take hands off the wheel too long as the system will alert. Use ACC less in rainy or congested conditions—it's best suited for steady roads. Through practice, driving has become more relaxing now. Highly recommended for long-distance drivers to try this convenient feature.

Was this review help?
13
Share
Expand All
More Q&A

What to Do When the Clutch Fails After a Car Goes Through Water?

First, turn off the car to see if you can shift gears. If you can shift gears when the car is off, it generally indicates that the problem is not serious. During driving, the driver can press or release the clutch pedal as needed to temporarily separate and gradually engage the engine and transmission.
107
Share

How to Restore Power When the Car Battery is Dead?

Use positive and negative pulse methods to perform depolarization charging on the battery, then fully discharge it. Repeat this cycle three times. If there are signs of capacity recovery, you can perform a few more cycles. Open the cover on the battery to reveal six round holes. Inject a certain amount of distilled water into these holes and soak for more than 24 hours.
118
Share

What to Do When Car Brakes Lock Up?

Loss of elasticity can easily cause the brakes not to return to their original position. Replacing the brake pedal return spring can solve this issue. When braking, the brake caliper clamps the brake disc to complete the braking action. If the brake caliper gets stuck, not only will the brake pedal fail to return, but the car will also be unable to move forward. Emergency braking causes significant damage to the brake pads. When driving normally, it is important to brake slowly or use the technique of intermittent braking (pumping the brakes).
103
Share

What is the hook at the back of a car?

This is called a tow hook or trailer hitch, mainly used for towing trailers or RVs. In China, this hitch isn't very practical since ordinary people rarely have the need to tow RVs or jet skis for travel. Many people install it just for aesthetics, while others use it as a rear-end collision deterrent—though this may protect your car at the expense of the one behind you. Tow hooks are more useful abroad, where holidays are frequent, and average families often tow RVs or travel trailers. Even without RVs, station wagons are common, making hitches more prevalent overseas.
101
Share

How to Decode Car Headlights?

Add a capacitor for the computer to detect the bulb. Based on the signal size output by the driving computer, 22000UF and 4700UF are commonly used. Typically, the decoding method used in cars is Ohm's Law: R (resistance) = U (voltage) / I (current). Modify the CAN protocol of the trip computer, also known as computer soft decoding.
114
Share

What to Do When Car Brake Pads and Rotors Stick Together?

When the brake pads and rotors are stuck together, first try releasing and applying the parking brake repeatedly several times. Start the car and use the foot brake in combination, pressing it multiple times. Start the car and alternate between moving forward and reversing. If they don't release, try a few more times, remembering not to accelerate abruptly and to use gentle force. If the issue persists, call the 4S shop for assistance. Typically, removing the tire and brake pads is necessary to resolve the problem.
111
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.