How to Turn on the High Beam in GS4?

[MacAlexa]

To turn on the high beam in the GS4, push the lever on the left side of the steering wheel forward. Taking the 2021 GS4 as an example, it is a compact SUV with the following dimensions: length 4545mm, width 1856mm, height 1668mm, wheelbase 2680mm, fuel tank capacity 55L, and trunk capacity 470L. The 2021 GS4 is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 169PS, maximum power of 124kW, and maximum torque of 265Nm, paired with a 6-speed manual transmission.

[Kimberly]

It's common to want to use the high beams while driving the GS4, especially on highways or rural roads at night. The general operation is on the turn signal lever on the left side of the steering wheel—just gently push it outward to activate the high beams, and a blue high beam icon will appear on the instrument panel to indicate they're on. Be mindful to only use them when there are no oncoming vehicles, as they can blind other drivers and cause accidents. The GS4 may also have automatic headlights, but if they don’t respond in dark conditions, manually pushing the lever is the safest option. During regular maintenance, check if the lever is responsive to avoid sticking. After use, remember to push it back to turn off the high beams and switch to low beams for safety—developing this habit ensures a more secure night driving experience.

[Darin]

Turning on the high beams is quite simple for GS4 beginners, usually controlled by the light lever on the right side of the steering wheel. Just push it outward to activate, and a blue indicator light will appear on the dashboard to remind you that it's on. Remember, this isn't for casual use—only for sections with poor visibility and no oncoming traffic, otherwise it can instantly blind drivers in the opposite lane. The GS4 owner's manual on page 58 has detailed illustrations, so it's advisable to take a moment to review and confirm the position to avoid accidental operation. Occasionally, if the lever spring is loose, it might not respond well, but a simple cleaning or maintenance can fix it. Get used to switching between high and low beams during night driving—it ensures clear visibility ahead without causing trouble for others.

[VonPaislee]

To activate the high beams on the GS4: Firmly push the light lever on the steering wheel column outward until the blue indicator lights up on the instrument panel. Operate swiftly and accurately to avoid compromising driving safety. Use high beams only in extremely dark conditions or when no other vehicles are present, as incorrect usage may prompt warnings from other drivers or cause accidents. Remember to promptly push the lever back to its original position to deactivate the high beams. This small action reflects a civilized driving attitude.

[SadieDella]

The high beam switch of the GS4 is located on the light stalk. Simply push it outward to activate. A small blue dot on the dashboard indicates the status, operating by controlling the vehicle's circuit connection via the stalk. The design is similar to most models, ensuring standardized operation. Always confirm the environment is safe before using high beams, and avoid using them in crowded urban areas to prevent annoyance or fines. Occasionally, aging stalks may cause poor contact—if it's hard to push, check or visit a maintenance shop for adjustment. Use high beams wisely during night driving for better visibility and smoother journeys.

[DiCaleb]

To activate the high beams on the GS4, check the position of the stalk. It's located on the left-hand side of the steering wheel. Gently push it outward to turn on the high beams, and a blue indicator will light up on the dashboard. Avoid testing it during the day to prevent accidental glare. Remember to use high beams only on dark, unoccupied road sections and push the stalk back to its original position after a few minutes. The GS4 may also have an intelligent lighting system; if there's no response in auto mode, switch to manual. Develop a habit of regularly checking the stalk while driving to ensure smooth operation. Use high beams safely for nighttime driving—stay visible without disturbing others on the road.