How to Turn on the Fog Lights on the New Bora?

[LaJack]

Method to turn on the fog lights on the New Bora: 1. Pull the light switch upward twice to turn on the rear fog lights; 2. When this light is turned on, the front fog lights will also illuminate. Fog lights are installed at the front and rear of the vehicle, used for illuminating the road and providing safety warnings during rainy or foggy weather, enhancing visibility for the driver and other traffic participants. The New Bora is a compact car with a length of 4663 mm, width of 1815 mm, height of 1462 mm, a wheelbase of 2688 mm, and a minimum ground clearance of 126 mm. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 113 hp, maximum power of 83 kW at 6000 rpm, maximum torque of 145 Nm at 3900 rpm.

[LeSkylar]

Turning on the fog lights of the new Bora is actually quite simple. As someone who has been driving for many years, I often use this function during foggy weather. First, start the car, then locate the light control stalk on the left side of the steering wheel—usually a rotary knob with a lever structure. Turn the knob to the headlight position, and the low beams will illuminate. Next, gently pull the control stalk outward once to activate the front fog lights; pull it again to turn on the rear fog lights. Remember, fog lights are specifically designed for low-visibility conditions, such as heavy fog or rain, where they enhance visibility and safety. However, avoid using them unnecessarily in normal conditions to prevent distracting other drivers. If your Bora has an automatic headlight feature, the operation might be more intelligent, as the system adjusts based on the environment, but manual mode is the most reliable. Check the owner’s manual to confirm details and ensure the lights are functioning properly—don’t wait for an emergency to act. Safe driving always comes first.

[AugustLynn]

I've been using the New Bora as my daily driver for over a year, and operating the fog lights is very quick. After ignition, turn the light knob on the center console to the 'on' position to activate the headlights. Then, pull the lever on the left side of the steering wheel outward one notch to turn on the front fog lights, and two notches to add the rear fog lights. Simple, right? I recommend using them in foggy conditions or when the road is wet from rain, as they illuminate the road ahead more clearly. I rely on them to slow down and drive cautiously when encountering heavy fog in the city. Remember to turn them off promptly after occasional use to avoid draining the battery quickly. The New Bora's lighting system is quite user-friendly, with intuitive operations that even beginners can quickly master. The key is using them at the right time to enhance driving safety.

[SiennaFitz]

The operation of the new Bora's fog lights relies on the mechanical manipulation of the light control lever. After starting the engine and activating the low beams, pull the control lever outward—typically, the first position turns on the front fog lights, and the second position activates the rear fog lights. This design ensures the lights function in low-visibility conditions, with the system automatically limiting them to high-brightness mode. Be mindful to check bulb lifespan to avoid circuit damage from repeated switching. Keep the control lever clean to prevent poor contact, ensuring stable and reliable lighting performance during foggy driving conditions.

[LeAlexandra]

When driving with kids in bad weather, I turn on the fog lights. First, insert the key to start the engine, then twist the light knob to turn on the headlights. Next, there's a small lever near the steering wheel - pull it out slightly to activate the front fog lights, and pull it further for the rear fog lights. I usually use them in heavy fog or rainstorms for better visibility and safety. I avoid using them in normal conditions to save battery power. It's a simple 2-3 step process without complicated design.

[Genesis]

For those who frequently maintain their cars, turning on the fog lights of the New Bora requires a step-by-step process: start the vehicle and turn on the headlights—adjust the knob to the correct position. Then, operate the left control lever—pull it out one notch to activate the front fog lights, and two notches for the rear fog lights. Fog lights are high-intensity lamps and should only be used in poor visibility conditions, as frequent use can shorten the bulb's lifespan. When using them, drive at a slow speed to ensure safety first. If the lights don't turn on, check the fuse or wiring for looseness to prevent malfunctions that could affect driving.