How to Turn on the Air Conditioning Cool Air in Chery?

[DeSebastian]

The steps to turn on the air conditioning cool air in Chery are: 1. Turn on the air conditioning; 2. Operate the air conditioning panel: Adjust the temperature control knob to the blue (cooling) area, and directly set the desired temperature on the DVD panel; 3. Set the air conditioning to face mode; 4. Choose the internal or external circulation mode based on actual conditions; 5. For quick cooling, set to internal circulation mode. For long drives, switch to external circulation mode to ensure air quality inside the car. The Arrizo 7 is an independent brand car released by Chery Automobile Co., Ltd., with a body size of 4652mm in length, 1825mm in width, and 1483mm in height, and a wheelbase of 2700mm.

[Jodie]

Over the past few years driving my Chery, turning on the AC has been quite straightforward. First, start the engine to power the air conditioning. Locate the AC controls on the dashboard and press the A/C button until it lights up, indicating the cooling system is activated. Then, turn the temperature knob all the way to the lowest setting, typically marked in blue. Adjust the fan speed gradually using the adjacent knob, starting from level 1 - avoid blasting maximum airflow immediately to prevent catching a chill. If there's an AUTO button, simply press it to let the system automatically regulate fan speed and cooling based on cabin temperature. Don't forget to adjust air vents using the directional arrows to angle airflow upward rather than directly at your face. During summer, I always check refrigerant pressure before driving to ensure strong cooling performance. Regular maintenance is crucial, especially replacing the cabin air filter - you'll notice significantly better cooling afterward.

[VanVincent]

As a driver who frequently uses Chery to pick up family members, turning on the AC requires a step-by-step approach. After starting the vehicle, press the AC button on the main control panel to activate the cooling mode. Then, lower the temperature setting by turning the knob to the left or pressing the minus button until it reaches around 18°C. Adjust the fan speed using the knob, starting from a low setting and gradually increasing it. I prefer pressing the recirculation button simultaneously to prevent hot air from entering, which helps cool the car faster. For automatic models, simply pressing the AUTO button is more convenient as it automatically controls the cooling and heating. Before parking in summer, it's best to open the windows for a few minutes to let the heat out before closing them and turning on the AC—this saves fuel and improves efficiency. Avoid setting the temperature too low; 18-22°C is comfortable enough to prevent catching a cold from drastic temperature changes. At the start of each summer, I remind my family to have the compressor checked at the service center to ensure the AC works properly.

[VonDante]

I've seen quite a few Chery car air conditioning issues while working in the workshop. After starting the car, press the A/C switch to light up the indicator, which means the cooling mode is on. Set the temperature a bit lower, usually around 20 degrees. If the car has an automatic function, just press AUTO for convenience. For manual operation, make sure the heating mode is turned off by adjusting the temperature knob. Adjust the fan speed to a moderate level using the fan button. Remember to check if there's any abnormal noise from the air vents, as normal compressor operation is crucial. Cleaning the air conditioning pipelines during maintenance is essential to prolong its service life.

[LeSadie]

I've driven Chery cars all my life, and operating the AC is not difficult. First, start the engine by turning the ignition key. Then locate the AC button on the control panel and press it to illuminate the indicator light. Turn the temperature knob to the blue zone to lower the setting, and adjust the fan speed starting from low. It's best to use AUTO mode to avoid complications. Take your time during the process and avoid setting the fan too high, as it may affect safe driving. Remember to check the refrigerant when seasons change to ensure optimal cooling performance.

[LeHarrison]

I pay special attention to the comfort of the car environment while driving. Turning on the cold air in a Chery car is simple: after starting the car, press the A/C button to activate cooling, and lower the temperature to, say, 18 degrees. Start with the lowest fan speed setting and increase it if it's not cool enough. Use the air vent direction button to adjust the airflow upwards, avoiding direct blowing to the head to reduce discomfort. The AUTO mode is more intelligent and convenient. Also, switch between the recirculation and fresh air buttons—fresh air brings in outside air while recirculation locks in the cold air. Regularly clean the air filter during car washes to maintain fresh airflow.