How to Turn Off the Maintenance Reminder Light on the Changan CS75?

[VanAdaline]

To turn off the maintenance reminder light on the Changan CS75, follow these steps: 1. First, turn the car key to the ON position (turn the key twice or press the start button twice for keyless ignition). 2. Then, press the selection button on the steering wheel. 3. Next, press and hold the reset button for about 5 seconds (keep holding the reset button without releasing it). 4. Turn off the power, ensuring the reset button remains pressed. Then, turn the power back on to clear the maintenance reminder. Additional Information: 1. The first maintenance for the Changan CS75 is required when the vehicle reaches 5,000 kilometers or six months. 2. The first maintenance is free of charge, including services such as oil change, oil filter replacement, fuel filter replacement, and a complimentary full vehicle inspection. 3. Maintenance can be done earlier but should not be delayed.

[NolanDella]

A few days ago, I just dealt with the maintenance reminder light issue on my CS75. The operation is actually quite simple: First, power on the vehicle without starting the engine. At this point, you'll see a small wrench icon on the instrument panel. Then, hold down the TRIP button on the left side of the steering wheel, turn off the power, and then power on again. Keep holding the button for about ten seconds until the wrench icon flashes a few times and disappears, and you're done. Make sure to hold the button without releasing it—sometimes if you're too slow, you might need to try a couple more times. This method applies to most model years of the CS75. For newer models with touchscreens, you can also go into the vehicle settings in the central control menu to turn off the reminder directly. However, after turning it off, it's best to note down the next maintenance time to avoid missing the cycle and affecting the car's condition.

[DeParker]

As a long-time owner, I've helped friends reset the maintenance light on the CS75 several times. The common procedure involves three steps: turn the key to the ON position to power up, then press and hold the square menu button on the dashboard; next, turn off the power, wait five seconds, power up again while continuing to hold the button; release when the indicator light goes off. The whole process takes just fifteen seconds. Important note: never attempt this while driving due to accidental activation risks. Some owners report unresponsive buttons - this usually requires sustained adequate pressure. If it still won't reset, there might be a system fault requiring a 4S shop computer reset. I always reset it after each maintenance to avoid being distracted by flashing icons while driving.

[DeAriana]

There are several ways to reset the maintenance light on the Changan CS75. For the base model using physical buttons: After powering on, press and hold the SET button on the right side of the dashboard for about ten seconds until the wrench icon disappears. For higher-end models with the intelligent connectivity system, it's more convenient—simply locate the 'Vehicle Health' page on the central control screen and click on 'Maintenance Reset.' Two things to note: First, ensure the gear is in P mode during the operation. Second, the system will accurately recalculate the mileage only if the operation is performed right after maintenance. Last time I tried the physical button method, it worked on the first try, simpler than expected. Of course, if it fails repeatedly, it might be a fuse issue requiring a line inspection.

[SanGrace]

The warning light on my CS75 is still on after the last maintenance. The mechanic taught me how to manually reset it: Sit in the car without pressing the brake, press the start button twice to power on, hold the cylindrical scroll wheel button below the left side of the steering wheel, then turn off the power and power on again. Keep holding the scroll wheel until the dashboard displays 'reset.' The entire process should not exceed 20 seconds; if done too slowly, the system might not recognize it. New owners are advised to check the manual first to confirm the button position, as designs vary slightly across different model years. Additionally, note that some post-2019 models require using the multifunction buttons on the steering wheel—specifics depend on the configuration. Resetting promptly can reduce annoying alerts, but it doesn’t mean you can delay maintenance.

[OJohnny]

Turning off the maintenance light depends on the vehicle model and configuration. Here's how to do it for my 2016 CS75: Turn the key to the second position, then press and hold the black adjustment lever on the instrument panel. After turning off the power and restarting, keep holding until the indicator light flashes three times and disappears. Newer models with the inCall system are smarter—just use voice command by saying "Turn off maintenance reminder." It's recommended to perform this operation in the morning when the engine is cold to avoid battery voltage fluctuations affecting success rate. If repeated attempts fail, it might indicate poor wiring contact or module malfunction, in which case a dealership inspection is needed. As a reminder, after turning off the light, the system resets to a 7,500 km countdown cycle, but don't exceed 5,000 km without checking the engine oil condition.