···
Log in / Register

How to Turn Off the Auto Start-Stop Feature in Vios?

6Answers
ThomasFitz
09/08/2025, 02:28:54 AM

To turn off the auto start-stop feature in Vios, simply press the auto start-stop button. Generally, the dashboard will indicate that the system is turned off. If you wish to use this function again, press the button to turn it back on. Vehicles equipped with auto start-stop usually have this feature enabled by default. Below is some information about the start-stop system: 1. Engine auto start-stop automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light) and restarts it when it's time to move again. The system is officially called STOP&START, abbreviated as STT. The STT intelligent fuel-saving system controls the engine's start and stop functions. 2. The start-stop system works by detecting when the vehicle stops due to traffic or at an intersection. The driver presses the brake pedal and shifts to neutral. The Start/Stop system then checks three conditions: the engine is idling and in neutral; the wheel speed sensors of the anti-lock system show zero; and the electronic battery sensor indicates sufficient energy for the next start. 3. Once these conditions are met, the engine automatically stops. When the traffic light turns green, the driver presses the clutch, activating the 'start stopper' to quickly restart the engine. 4. In automatic transmission models, releasing the brake or turning the steering wheel will immediately restart the engine, allowing the driver to accelerate without shifting from D gear.

Was this review help?
106
Share
StCarmen
09/20/2025, 01:00:54 AM

Last time I drove my friend's Vios, I also checked this out. The auto start-stop button is located near the gear lever on the center console, usually marked with an 'A' inside a circle. Just press the button once, and a yellow 'Auto Start-Stop Off' indicator will appear on the dashboard to confirm it's deactivated. However, it resets to the default 'on' state every time you restart the car, so you need to get into the habit of pressing it after ignition. My friend said he particularly dislikes the feeling of the engine shutting off at red lights, especially in summer when the frequent restarts cause noticeable vibrations with the AC running. For those who want to disable it long-term, some owners install an auto start-stop deactivation module, but it's not recommended to tamper with the original wiring.

Was this review help?
16
Share
Expand All
PaisleyDella
11/03/2025, 12:22:03 AM

Turning off the auto start-stop on the Toyota Vios is quite simple. Just locate the circular button with an arrow and the letter A near the gear lever. Press it lightly once, and the dashboard will display a shutdown prompt. The key point is that the engine must be running for the button to function—it won't work when the car is parked and turned off. I've found that the pressure applied when braking at a red light is crucial: light pressure won't trigger the start-stop, while heavier pressure activates it. This trick is more convenient than manually turning it off in city traffic jams. Although the feature is primarily designed for fuel savings, frequent starts do put a significant strain on the battery.

Was this review help?
1
Share
Expand All
StJocelyn
12/17/2025, 12:22:07 AM

As a seasoned driver who frequently operates Japanese cars, the Vios' start-stop deactivation button is conveniently located on your right side. Simply press the button and you'll hear a crisp confirmation tone indicating it's turned off. Here's a lesser-known fact: when the AC is on with a significant difference between set and actual temperatures, the system automatically disables start-stop. For new cars in the break-in period, it's advisable not to rush turning it off as it may affect the manufacturer's fuel consumption data and subsequent maintenance. Additionally, always manually deactivate it before wading through heavy rain - if the engine stalls in water and auto-restarts, it could be completely ruined.

Was this review help?
8
Share
Expand All
LeAshley
02/06/2026, 01:12:33 AM

The actual test shows that the Vios auto start-stop has three levels of deactivation: First, manually pressing the physical button for a temporary deactivation, valid until the next ignition. Second, installing a deactivation device via the OBD interface for permanent deactivation, but this may affect the warranty. Third, skillful control—setting the air conditioning temperature at least 4 degrees lower or keeping the rear window defogger on will prevent the system from operating. Interestingly, activating this function requires meeting over a dozen conditions, including seatbelt fastening, door closure, engine temperature, etc. Understanding these can help you better manage it.

Was this review help?
3
Share
Expand All
DiElijah
05/01/2026, 04:54:16 PM

When I first got my Vios, I was most annoyed by the auto start-stop feature. But later I discovered Toyota's thoughtful design. The off button has clear tactile feedback - just press it and the yellow 'A' with a slash light on the dashboard will illuminate. After extensive use, I learned three things: First, turning it off during frequent short trips helps protect the battery. Second, keeping it on during long descents reduces brake pad wear. Third, be careful not to brake too hard when reversing, or the sudden engine shutoff during parking can be embarrassing. I recommend keeping the physical button and avoiding modifications, as you might need to temporarily enable it during annual inspections.

Was this review help?
15
Share
Expand All
More Q&A

What Causes a Scooter to Shudder When Starting?

The reasons for a scooter shuddering when starting are as follows: 1. The contact area between the friction plates and the clutch housing working surface is too small. Solution: Apply chalk to the surface of the clutch shoe friction plates, install the clutch, start the engine, and accelerate-brake to stop the rear wheel. Repeat this several times, then remove the clutch and inspect the working contact surface of the shoe friction plates. Use a grinding wheel to polish the surface of the clutch shoe friction plates, ensuring the contact area between the friction plates and the clutch housing working surface exceeds 80% of the total area. 2. Excessive wear of the clutch friction plates. Solution: Use a file to reshape the chamfers at both ends of the clutch friction plates, increasing the chamfers that have been reduced due to wear. 3. Sticking movement of the clutch shoes on the pins. Solution: Clean and lubricate the clutch shoe mounting pins (i.e., the transmission plate pins) and the pin holes on the clutch shoes to eliminate the sticking movement of the clutch shoes on the pins. 4. Damage to the small springs of the clutch shoes. Solution: Replace the three small tension springs of the clutch shoes, ensuring they have equal tension to eliminate the asynchronous engagement between the clutch friction plates and the clutch housing.
105
Share

Where is the trunk opening switch for the Buick Regal?

The Buick Regal has three trunk opening switches: 1. On the left front door, look up from the bottom, and there is a trunk opening button on the interior trim panel. 2. The central door lock on the left front door also serves as the trunk switch. 3. Pull down the decorative panel behind the center armrest of the rear seats, and there is an emergency exit handle inside. Pulling it hard can also open the trunk. Below is some related information about the Buick Regal: 1. In terms of body dimensions, the length, width, and height are 4902/1863/1456 mm, respectively, with a wheelbase of 2829 mm. Some models have a length of 4909 mm. 2. There are two types of powertrains. The first type: equipped with a 1.5T inline 4-cylinder turbocharged engine, paired with a 9-speed automatic transmission, with a maximum power of 125 KW and a maximum torque of 252 N·m. The second type: equipped with a 2.0T inline 4-cylinder turbocharged engine, paired with a 9-speed automatic transmission, with a maximum power of 192 KW and a maximum torque of 350 N·m.
104
Share

How often should the first maintenance be done for FAW-Volkswagen Bora?

Volkswagen Bora 4S stores recommend the first maintenance time to be after driving 5,000 kilometers, and the manufacturer provides free first maintenance. The main maintenance items are changing the engine oil and oil filter. 4S stores will formulate the maintenance cycle based on the actual local car usage conditions, and the maintenance cycle of some parts may differ from the one suggested in the official manual. The following is an introduction to car maintenance: Introduction to car maintenance items: Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car maintenance. Car maintenance mainly includes the maintenance scope of the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The purpose of maintenance is to keep the car clean, in normal technical condition, eliminate hidden dangers, prevent failures, slow down the deterioration process, and extend the service life. Introduction to maintenance precautions: The maintenance cycles of different car series and brands vary greatly, mainly due to the differences in the specific technical conditions of different vehicles. Different brands of vehicles are equipped with engines of different designs. Some engines have better materials and higher precision, so the wear will be relatively small; while some cars have higher requirements for engine oil, and even have special requirements. Therefore, brand cars generally need corresponding original engine oil to lubricate.
105
Share

Should the Car Battery Be Replaced When It Runs Out of Power?

When a car battery runs out of power, replacing it is optional. Here are several solutions: 1. Replace the battery: If you happen to have a spare battery, this method is the simplest and most convenient. 2. Jump-start: Connect jumper cables to another car's battery to start your vehicle, then figure out the next steps. 3. Call for roadside assistance or a repair shop: Both options require additional fees and are generally not recommended. 4. Contact your insurance company: This is a legitimate benefit that every insured car owner should utilize. Additionally, insurance companies often provide free towing within 100 kilometers in urban areas and fuel delivery services when you run out of gas.
105
Share

Which country's brand is Jaguar?

Jaguar is a top-tier luxury car brand used by the British royal family, selling luxury sedans, sports cars, and coupe SUVs. It was founded in 1922 and is headquartered in the UK. Main models include the I-PACE, XJ, XF, F-Type, XK, Cambridge Limited Edition, etc. The Jaguar emblem features a leaping "Jaguar" sculpture, robust and fierce, combining form and spirit with a sense of modernity and visual impact. It not only represents the company's name but also embodies the power and speed of forward movement, symbolizing the car's ability to gallop across the world like a jaguar. Key milestones in Jaguar's development are as follows: 1935: The first Jaguar model, the SS100, was born. 1953: With its newly developed secret weapon, the "disc brake," Jaguar began its undying legend on the Le Mans circuit. 2004: Jaguar officially entered the Chinese market. 2009: The all-new Jaguar XJ made its global debut. 2014: The all-wheel-drive version of the Jaguar XJ successfully challenged the world's extreme low temperatures. 2015: Jaguar announced the mass production of the C-X17 concept car, naming it the F-PACE. 2020: Ranked 165th in the 2020 World's 500 Most Valuable Brands list.
120
Share

How to Check the Oil Dipstick on a Changan Vehicle?

To check the oil dipstick on a Changan vehicle, follow these steps: 1. First, locate the dipstick handle in the engine compartment and prepare a piece of tissue. 2. Pull out the dipstick and use the tissue to wipe off as much oil as possible from the dipstick head. Observe the oil level markings on the dipstick. 3. Reinsert the cleaned dipstick back into its original position. Ensure the entire dipstick is fully inserted before pulling it out again. Note that the dipstick can be held vertically, tilted, or horizontally, but never upside down, as this may cause oil to flow back. 4. Finally, observe the oil level on the dipstick.
108
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.