···
Log in / Register

How to Start the Changan Eado Vehicle When the Remote Key Battery is Dead?

3Answers
VanCassidy
07/29/2025, 04:38:11 PM

Here are the methods to start a Changan Eado vehicle when the key battery is dead: 1. First, use the mechanical key to open the car door, then press the vehicle brake or clutch, place the smart key at the bottom of the cup holder, and press the ignition switch directly when it lights up to start the car normally; 2. Replace the key battery before starting the vehicle. First, press the PUSH button to remove the mechanical key, use the front end of the mechanical key to pry open the key shell, then remove the depleted battery. When installing the new battery, pay attention to the positive and negative poles, and finally, cover the assembled battery properly.

Was this review help?
117
Share
VanAdalynn
08/14/2025, 01:48:16 PM

That time when I drove my Changan Eado for an outing, the remote key suddenly ran out of battery and I was really panicked. Fortunately, I remembered there's a small notch on the side of the car key—pressing it pops out a hidden mechanical key blade. I used it to pry open the door lock, got in the car, and then placed the dead key near the start button area under the steering wheel. Pressing the start button, the car roared to life. This trick works because the key still has a transponder chip inside that functions without the battery. I usually recommend keeping a spare CR2032 coin cell battery at home—it’s a handy emergency fix on the road, much better than waiting helplessly for a tow truck. But if the car still won’t start, it’s best to call for professional repair immediately.

Was this review help?
9
Share
Expand All
SanDominic
05/09/2026, 05:38:01 AM

If the remote key runs out of battery, first, extract the mechanical key from the key fob to unlock the door. Second, enter the car and close the door securely. Third, hold the key close to the start button area for five seconds to activate the induction. Fourth, press the button normally to start the vehicle. Do not delay during this process, especially at night, as it can be more dangerous. After completing these steps, promptly purchase a new battery to replace the old one or consult a 4S store for maintenance to ensure no further issues affect driving safety.

Was this review help?
14
Share
Expand All
More Q&A

Which company produces the Neta V electric car?

Neta V is the third new model under the Neta Auto brand, which is a car brand owned by Zhejiang Hezhong New Energy Automobile Co., Ltd. Here are the relevant introductions: 1. Neta: The Neta V comes in standard range and long-range versions. The standard range version has a range of 301KM, with a maximum power of 40KW and torque of 110 N·m. 2. Electric Vehicle: An electric vehicle (BEV) refers to a vehicle that uses on-board power as its power source, drives the wheels with an electric motor, and meets all the requirements of road traffic and safety regulations. Due to its relatively smaller impact on the environment compared to traditional cars, its prospects are widely optimistic.
114
Share

What are the body dimensions of the 2021 Teana?

2021 Teana body dimensions are 4901mm in length, 1850mm in width, and 1450mm in height, according to official data. The length of the Teana refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane and touching the outermost protruding parts at the front and rear of the vehicle; the width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and touching the outermost rigid fixed protruding parts on both sides of the vehicle; the height refers to the distance between the highest point of the vehicle and the vehicle's supporting plane. The 2021 Teana is equipped with a 2.0L naturally aspirated engine, paired with a continuously variable transmission, delivering a maximum horsepower of 156ps, a maximum power of 115kw, and a maximum torque of 197nm. There are national regulations regarding vehicle dimensions. According to the national standard "GB1589-89," the total width of a vehicle does not include side mirrors. The limitation on vehicle width is to provide sufficient lateral clearance for overtaking between adjacent lanes. This means that, under national standards, the significance of vehicle width data is to ensure enough space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to meet the requirements of public road usage.
115
Share

Where is the car reset button located?

Car reset button is located inside the cover panel on the right side of the CD slot, appearing as a small hole. Below are relevant introductions about the reset button: 1. Concept: The reset button, also called restart button (RESET), exists in computer hosts, laptops, smartphones, smart PDAs or other electronic products. Due to its function, its position is usually concealed and not easy to touch accidentally. 2. Function: The reset button initiates a startup after clearing current CPU and operation data. It doesn't involve power interruption. All reset signals on the motherboard are generated by the chipset, mainly produced by the southbridge (which contains the reset system controller) or reset generator (74H series chips).
106
Share

How to Apply Heat Insulation Film?

Applying heat insulation film involves peeling off the film and evenly spraying water on the effective film surface. Here is a detailed introduction to the process: 1. Car Washing: Clean both the interior and exterior of the car thoroughly. 2. Cleaning the Window Glass: Any residue or dirt on the glass, even a tiny bit, can affect the quality of the film application. Prepare two scrapers in advance, one hard scraper and one soft scraper (available at most auto accessory stores). Spray water (mixed with detergent) on the glass, then use the hard scraper to remove obvious dirt. Next, use the soft scraper to wipe away water marks. Repeat this process three to four times until the glass is completely dry. Finally, spray water on the fully cleaned window, close the car window, and ensure only the person applying the film remains inside the car.
103
Share

What Causes the Car Body to Be Tilted When Reversing into a Parking Space?

After the car enters the parking space, the reason the car body is tilted is due to not developing the correct habit of observing the relationship between the curb and the tilt of the car body in the rearview mirror. The correct observation should show that the curb in the rearview mirror and the car body are "narrower in the front and wider in the back." Therefore, if the car body appears "narrower in the front and wider in the back" in the rearview mirror after entering the parking space, the actual car body and the curb are parallel. Below is relevant information: 1. Reversing into a parking space: This involves maneuvering the vehicle to correctly reverse into the parking space from both sides, starting from point A into parking space B, and stopping properly. Then, move forward to the return area C and stop. Reverse from the return area into parking space B and stop. Finally, return from parking space B to point A to complete the test. 2. Test items: For small car licenses C1 and C2, the test items include reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves (commonly known as S-curves) as the five mandatory items (some regions also include a sixth item, high-speed card collection).
103
Share

What Impact Does Car Discontinuation Have on Owners?

Discontinuation won't have much impact, primarily depending on future maintenance parts availability. Here's some information about car discontinuation: 1. Car Depreciation: For most vehicles, discontinuation means fewer buyers than before, significantly reducing resale value due to market inventory. However, for certain models like Toyota, resale value doesn't drop abnormally after discontinuation. 2. Reasons for Discontinuation: Most vehicle discontinuations occur due to low sales volume. Additionally, model aging and regional sales preferences may prompt manufacturers to halt production.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.