How to Start the Car in Driving Test Subject 3?

[JaxonMarie]

The method to start the car in Driving Test Subject 3 is: 1. After hearing the voice prompt to start, depress the clutch; 2. Shift the gear into first gear; 3. Turn on the left turn signal, which will be displayed on the dashboard; 4. Simultaneously observe the left rearview mirror, confirm safety, and honk the horn; 5. Release the parking brake, start smoothly, and turn off the turn signal. Before starting, observe first. When the conditions are suitable for starting, release the clutch. At this time, you won't be nervous due to incoming and outgoing vehicles affecting your operation, and you can start slowly. The method of using gears in a manual transmission is: 1. Start in 1st gear; 2. Use 2nd gear between 20 to 40 km/h; 3. Use 3rd gear between 40 to 60 km/h; 4. Use 4th gear between 60 to 75 km/h; 5. Use 5th gear above 75 km/h; 6. Reverse gear is used for backing up.

[LucilleLee]

Starting the car in Subject 3 may seem simple, but it's easy to lose points during the test. When I was learning to drive, my instructor emphasized that the first step is to adjust the seat and its height, ensuring you're comfortable and can fully depress the clutch and brake. Don't forget to fasten your seatbelt. Next, check the car's condition, mainly looking at the dashboard and confirming the handbrake is engaged to prevent the car from sliding unexpectedly when starting. Then, press the clutch or brake pedal and start the engine. Before shifting gears, turn on the turn signal if you're making a turn—this is highly emphasized in the test. After shifting into first gear, don't rush to release the handbrake; first, look around, including checking the rearview mirror and blind spots. Finally, slowly release the clutch while lightly pressing the accelerator to start smoothly. With enough practice, it feels like a natural motion. On the day of my Subject 3 test, I was nervous, but remembering these steps helped me pass on the first try. Remember, safety observation is key; otherwise, you'll be disqualified immediately.

[EvanDella]

Starting operation is a fundamental skill in Subject 3, and I believe it must be grasped from a holistic perspective. After getting into the car, first adjust the seat position to ensure natural operation of the pedals and steering wheel. The seatbelt is a safety essential—don't skip it. Before starting the engine, check the handbrake and the surrounding environment, such as whether the rearview mirror angles are appropriate. Press the clutch or brake pedal firmly, and ensure the gear-shifting sequence is correct. Before releasing the handbrake, turn your head left and right to check for any obstacles behind you—this is a key point monitored by the examiner. Use the turn signal in advance if needed. When starting, make gentle movements to keep the vehicle stable without sudden stops, as abrupt actions can affect smoothness. In actual driving, developing this habit can prevent many accidents. Practice more simulations, and you'll find yourself growing more confident.

[McRyder]

The starting steps can be memorized step by step: Adjust your sitting position and fasten the seat belt. After starting the engine, press the clutch or brake pedal. Shift into first gear or drive, and turn on the turn signal. Before releasing the handbrake, scan the outside environment, including turning your head to check blind spots. Gently release the clutch and press the accelerator to start smoothly. Maintain a natural state throughout the process. Don't let the examiner feel that you are nervous. Common mistakes during the test are neglecting observation or starting too quickly. With more practice, you can pass easily.

[LincolnRose]

When reflecting on the starting procedure of the driving test (Subject 3) after my daily drives, I still believe the core lies in preparation and execution. First, adjust the seat position and height properly, then fasten the seatbelt securely. Start the engine and check if all dashboard indicators are normal, ensuring the handbrake is engaged. Press the clutch or brake pedal before shifting gears. The critical step is to look around and check blind spots by turning your head before releasing the handbrake. Start slowly to avoid vehicle shuddering. Although the pressure during the test is high, maintaining control over the rhythm is key. Remember, prioritizing safety can help you pass in one attempt.

[LouisRose]

I pay special attention to the details of starting off: First, adjust the seat to ensure smooth operation, and wearing the seatbelt is mandatory. Check the handbrake and dashboard status before starting. Depress the clutch or brake pedal, then start the engine. After shifting gears, make sure to observe the rear thoroughly, including turning your head to check blind spots. Use the turn signal in advance when necessary. Release the handbrake while paying attention to the smoothness of the start. These small actions are scored during the test, such as missing observations leading to significant point deductions. Practice until they become instinctive.