···
Log in / Register

How to Solve the Problem of Abnormal Noise When Opening and Closing Car Doors?

6Answers
McJordan
07/29/2025, 09:39:21 AM

Solutions for abnormal noise when opening and closing car doors: 1. Check if the door seal is aging and replace it if necessary; 2. Check for any foreign objects in the door gaps and clean them; 3. If the noise is caused by loose parts between door components, tightening the screws can solve the problem; 4. If the noise is due to insufficient body stiffness or welding detachment causing friction between steel plates, it is recommended to seek professional repair at a maintenance shop. The design requirements for car doors are: 1. Ensure ease of passenger entry and exit, with the opening angle controlled between 65 to 70 degrees; 2. Avoid positional interference with other parts during the opening process; 3. Ensure reliable locking when the door is closed to prevent it from opening while driving; 4. Provide good sealing performance; 5. Have a large transparent area to meet lateral visibility requirements; 6. Possess sufficient strength and stiffness to ensure reliable door operation, reduce door vibrations, improve vehicle side collision safety, and prevent door sinking.

Was this review help?
117
Share
CollinRose
08/14/2025, 12:39:21 AM

I always hear a squeaking noise when opening my car door, which is really annoying. That's usually caused by lack of lubrication in the door hinges. I've fixed it myself several times: buy a can of WD40 or special lubricating oil, lay some old newspaper on the ground to prevent dripping, spray a few times into the gaps of the door hinges with a fine nozzle, then manually open and close the door a dozen times to distribute the lubricant. If the noise comes from the door seal, spray some silicone protectant to lubricate the friction surface. Be careful not to over-spray and stain the door panel during the process. This job is simple and cost-effective, just a few bucks for materials. If the noise persists after DIY, it might be due to a misaligned door latch or loose internal parts, requiring a professional mechanic's inspection. Ignoring it could lead to improper door closure, increased wear, and even safety risks at high speeds, so regular maintenance ensures safety.

Was this review help?
5
Share
Expand All
LondonLynn
10/10/2025, 12:29:32 AM

Door opening and closing noises may seem like minor issues, but they can hide potential hazards. Unlubricated hinges may rust and worsen, while aged or damaged door seals can lead to water leaks or increased wind noise, affecting driving comfort. During inspection, I first feel the noisy area with my hand—if it's the hinge, I spray some lubricant; if it's the door latch, I try adjusting its position; for dry and cracked seals, applying a protective spray can restore elasticity. If the problem persists, don't force it—timely repairs can prevent more expensive part replacements. Prevention is key—I lubricate my car doors every six months to extend their lifespan. This habit saves hassle and protects the car, as letting small issues escalate into major repairs isn't worth it.

Was this review help?
14
Share
Expand All
TimothyLee
11/23/2025, 12:41:07 AM

Door opening and closing noises mostly come from a few places. Hinge friction due to lack of oil: Just buy a bottle of lubricant and spray it into the gaps. Door lock mechanism issue: Try adjusting by twisting the latch position. Aging weather strip friction: Spray specialized protective agent for lubrication. Clean dust before operation to avoid clogging. DIY solution takes just minutes and costs little. If the sound comes from deep inside, it might be loose internal screws or a broken door stopper - then you should seek a technician for disassembly and repair. Don't delay, as worsening noise affects door sealing performance.

Was this review help?
18
Share
Expand All
SanEliza
01/13/2026, 02:16:52 AM

My old car's door squeaks on rainy days, and the root cause is the dried and cracked sealing strip. Here's how I handled it: I used a soft cloth dampened with water to clean the dust off the surface of the sealing strip, then sprayed rubber protectant and let it soak in overnight to restore elasticity. After opening and closing the door a few times, the squeaking disappeared. Additionally, I checked if the noise was coming from the hinges—if so, a little lubricant spray would help. If the sealing strip is severely damaged, replacing it is inexpensive—just a few dozen yuan, and you can install it yourself. Regular maintenance with protective sprays can extend its lifespan and reduce squeaks. Ignoring it may accelerate wear, cause air leaks, and increase noise. Keeping it clean ensures the car lasts longer.

Was this review help?
8
Share
Expand All
LeVanessa
04/09/2026, 10:47:05 PM

Door squeaking is usually caused by lack of lubrication in hinges or issues with weatherstrips. My approach: Purchase lubricant spray to apply in hinge gaps, manually open/close door to distribute evenly and eliminate friction noise; Apply protectant on weatherstrips to enhance flexibility and prevent dry cracking sounds. Simple DIY solution saves money and time – just a few bucks to prevent premature part aging. For persistent squeaks, check and fine-tune latch position; Tighten any loose internal screws. Weekly dust cleaning maintenance ensures smooth door operation. Never ignore squeaks – they may expose safety hazards affecting driving safety. Timely repairs bring peace of mind.

Was this review help?
15
Share
Expand All
More Q&A

How many seats does the Haval H5 have?

Haval H5 has five seats. Below is the relevant information about the Haval H5: Introduction to Haval H5: Both the diesel and gasoline versions of this vehicle are equipped with a 2.0T turbocharged engine. The diesel engine has a maximum power of 110 kW and a maximum torque of 320 Nm, while the gasoline engine has a maximum power of 140 kW and a maximum torque of 250 Nm. The transmission system is configured with a 6-speed manual transmission matched to the engine. The body dimensions are 4645 1800 1775 mm (length width height), with a wheelbase of 2700 mm. Haval H5 Seating: The Haval H5 is a five-seater model. It is a compact SUV launched by Haval Motors. Due to certain limitations in body size, the five-seater configuration more easily meets the demand for space.
102
Share

Can I drive on the highway right after getting my driver's license?

No. Generally, drivers can drive on the highway after completing a one-year probationary period with their driver's license. If traffic violations occur during the probationary period, extending it by another year, then it would be two years. Here are some precautions for highway driving: Observe traffic rules: New drivers should pay attention to traffic regulations and display a probationary sign. Highway speed limits: Before entering the highway, inspect your vehicle. The minimum speed on the highway should not be less than 60 km/h, and the maximum speed should not exceed 120 km/h. Merge in advance: When exiting the highway, merge into the outermost lane early upon seeing roadside indicators at 1.5 km and 1 km distances. Maintain distance: Keeping a safe distance is the most crucial factor for driving safety. Many drivers, due to lack of experience, may misjudge distances, follow too closely, and risk not braking in time.
119
Share

What are the differences between GAC Trumpchi GS3 and GS4?

The differences between GAC Trumpchi GS3 and GS4 lie in their positioning, transmission, and body dimensions. Here are the relevant details: Different Positioning: The GS3 is a small SUV; the GS4 is a compact SUV model. Different Engines and Transmissions: The GS3 does not have a dual-clutch transmission, while the GS4 does; the GS3 and GS4 share the same 1.3T engine, but the GS4 has an additional 1.5T engine. Different Body Dimensions: The GS3 measures 4350mm in length, 1825mm in width, 1655mm in height, with a wheelbase of 2560mm; the GS4 measures 4525mm in length, 1852mm in width, 1685mm in height, with a wheelbase of 2640mm.
111
Share

Should an automatic transmission car be warmed up in P or N gear?

An automatic transmission car should be warmed up in P gear. The method for warming up the car is as follows: 1. Start the vehicle and keep the air conditioning turned off; 2. Let the car idle for 1 minute to warm up; 3. Drive slowly after the engine runs smoothly; 4. Once the temperature gauge rises by 1 to 2 bars, you can drive normally and use the air conditioning. The steps for parking an automatic transmission car are: 1. Start the engine, press the foot brake, and shift to D gear; 2. Release the handbrake and foot brake, then press the accelerator to start moving; 3. Press the brake to stop the car; 4. Shift from D gear to N gear and tighten the handbrake; 5. Press the foot brake and shift from N gear to P gear; 6. Release the foot brake, turn off the power, and remove the key.
120
Share

Can I Change the Rims Without Changing the Tires?

Whether to change the tires after replacing the rims depends on the size of the rims. Reasons: The diameter of the rims: Upgrading to larger rims provides better visual appeal and enhances the subjective driving experience. However, larger rims require the use of larger-sized tires. The width of the rims determines the appropriate tire width. For performance-oriented car owners, wider tires can deliver superior performance. Precautions for Rim Replacement: Avoid blindly increasing rim size for aesthetic purposes, as larger rims can significantly impact ride comfort. Rims are generally categorized into forged and cast types, with varying quality levels, so careful selection is necessary.
103
Share

What type of suspension does the Haval H6 have?

Haval H6 Front Suspension: All Haval H6 models feature MacPherson strut independent suspension at the front. The rear suspension is a double-wishbone independent suspension, with the following details: Haval H6 Suspension: The front suspension of the Haval H6 uses MacPherson strut independent suspension. The rear suspension is a double-wishbone independent suspension, with a uniquely designed lower control arm that handles both lateral and longitudinal positioning. In terms of materials, the Haval H6 employs aluminum for the steering knuckle, reducing unsprung weight and indirectly improving handling. The exhaust system is designed to accommodate the driveshaft, and the subframe's curved shape facilitates the installation of the rear differential, among other details. Double-Wishbone Suspension Overview: Double-wishbone suspension is also known as double A-arm or double wishbone, depending on the shape of the arms. Its main advantages include high lateral stiffness, excellent anti-roll performance, superior grip, and clear road feedback. However, it also has drawbacks, such as higher manufacturing costs and complex suspension parameter settings. These challenges have been addressed by Haval's engineering team. Double-wishbone suspension is typically used in sports cars, supercars, and high-end SUVs for both front and rear suspensions. The Haval H6's rear suspension utilizes this type of setup.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.