How to solve the abnormal noise of Leopaard CS10 sunroof?

1 Answers
MacJayla
07/30/25 6:06am
Abnormal noise indicates severe lack of lubrication on the slide rails. The slide rails should be checked for deformation and lubricated in time. The details are as follows: 1. The main maintenance of the sunroof is the lubrication of the slide rails. If there is a lack of lubrication, there will be abnormal noise, poor movement, incomplete closure, or even jamming and displacement over time, which may burn out the motor. 2. The sunroof needs to be cleaned every 2 to 3 months. Clean the dust and particles in the sunroof gap. First, use a cloth to remove the dust on the sealing strip, and then apply butter for lubrication. 3. If the car is parked for a long time without use, it needs to be cleaned regularly. Use talcum powder to clean the sealing ring and other parts, which can increase the service life of the parts. 4. In winter, after washing the car or on snowy days, the sunroof glass and sealing rubber frame may freeze. After washing the car or on snowy days, clean the water in the gaps in time to prevent difficulty in opening due to freezing. 5. When using the electric sunroof, avoid opening it on bumpy roads, as severe car vibration may cause deformation of parts, which may easily lead to motor damage when closing the sunroof.
Was this review help?
9
2
Share
More Forum Discussions

What are the symptoms of a clogged automotive expansion valve?

It will cause the air conditioning compressor to operate under increased load, resulting in a situation where the AC produces cool air but fails to blow out. Here are the relevant details: 1. Cooling effect: The expansion valve converts medium-temperature, high-pressure liquid refrigerant into low-temperature, low-pressure wet vapor through throttling to achieve cooling. It controls valve flow based on temperature changes at the evaporator outlet, preventing insufficient utilization of evaporator surface area and compressor knocking. 2. Function: The expansion valve has two main functions - throttling and controlling refrigerant flow. Thermal expansion valves can be categorized as internally or externally balanced based on their balancing method. In automotive refrigeration systems, the expansion valve is one of the four major components, with the other three being the compressor, condenser, and evaporator.
7
3
Share

What is the Difference Between Beam Blades and Conventional Wiper Blades?

The differences between beam blades and conventional wiper blades are: 1. Different principles: Beam blades directly apply force to the steel strip, distributing the concentrated force evenly to maintain uniform pressure on the rubber blade; Conventional wiper blades press the blade against the windshield through multiple support points on the frame, ensuring average pressure at each support point. 2. Different working conditions: Beam blades require wiper arms with higher pressure and more powerful wiper motors; Conventional wiper blades do not. 3. Different force distribution: Beam blades distribute force across the entire rubber blade, allowing for tighter contact with the curved windshield; Conventional wiper blades transmit pressure through layered strips, resulting in uneven pressure distribution, inconsistent contact between the entire blade and the windshield, uneven wear over time, and a tendency to produce noise between the windshield and the blade.
8
0
Share

Where to Obtain the Motor Vehicle License and Registration Application Form?

Motor vehicle license and registration application forms can be obtained at the local vehicle management office. Below is relevant information about vehicle annual inspections: 1. Initial inspection: The inspection conducted to apply for a vehicle license plate is called the initial inspection. The purpose of the initial inspection is to verify whether the motor vehicle meets the conditions for applying for a license plate. 2. Definition: National regulations stipulate that motor vehicles must periodically pass inspections for exhaust emissions, vehicle appearance, lights, brakes, chassis, etc., and obtain an inspection compliance sticker provided there are no traffic violation records. All annual inspection dates are based on the registration date listed on the vehicle license. Motor vehicles must undergo safety technical inspections according to the following periods from the date of registration, commonly referred to as "annual inspection" or "annual review."
19
2
Share

2021 Honda CR-V Button Instructions

Here are the detailed instructions for the buttons in the 2021 Honda CR-V: 1. Electronic Stability Program (ESP): The system is enabled by default. 2. Parking Sensors and Camera: Alerts the driver to surrounding obstacles through images and warning sounds. 3. Recirculation/Fresh Air Mode: Recirculation mode circulates the air inside the cabin, while fresh air mode exchanges air between the inside and outside of the vehicle. Use recirculation mode in congested traffic or poor air quality environments. On highways, switch to fresh air mode approximately every hour to replenish oxygen levels inside the cabin. 4. Auto Hold: The system automatically locks the wheels. 5. Auto Start-Stop: Temporarily shuts off the engine at traffic lights.
3
1
Share

Does not deregistering a motorcycle have any impact?

Failing to deregister a motorcycle that meets the scrapping standards as required is considered illegal. Drivers with unresolved violations will not pass the license renewal inspection when their driver's license expires. Below is relevant information: 1. Service life: Light two-wheeled motorcycles, light three-wheeled motorcycles, two-wheeled motorcycles, and sidecar motorcycles that have accumulated a mileage of 100,000 kilometers, and three-wheeled motorcycles that have accumulated a mileage of 80,000 kilometers. 2. Motorcycles cannot be deregistered without being scrapped: For motor vehicles that have reached the national mandatory scrapping standards, the owner must fill out an application form and submit the vehicle registration certificate, license plate, and vehicle license when selling the vehicle to a recycling company. The recycling company must confirm the vehicle and dismantle it, then issue a "Recycling Certificate for Scrapped Motor Vehicles" to the owner.
10
5
Share

What does SAE mean?

SAE refers to the viscosity grade classification of gear oil. Gear oil can be divided into single-grade viscosity type and multi-grade viscosity all-weather type. The single-grade viscosity type can be further categorized into high-temperature type and low-temperature type. The multi-grade viscosity all-weather type is labeled similarly to SAE80W90, where the number before the slash indicates the low-temperature viscosity performance in winter—the smaller the number, the lower the low-temperature viscosity, resulting in better fluidity and enhanced low-temperature resistance. The number after the slash represents the high-temperature viscosity performance—the larger the number, the higher the high-temperature viscosity, providing better resistance to high temperatures. Gear oil is a high-viscosity lubricant primarily used in automotive transmissions to lubricate various gears in the gearbox, reducer, and differential, preventing gear surface wear, scuffing, and seizing, thereby extending service life and improving power transmission efficiency.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.