How to Set the Horn Sound When Locking the Boyue

[Zelda]

The method to set the horn sound when locking the Boyue is to select the locking option in the vehicle's onboard computer settings, then click 'lock on' to activate the horn sound function when locking. Taking the Boyue 2021 Million Edition 1.8TD Manual Two-Wheel Drive Comfort Model as an example: The manufacturer of this car is Geely Auto, classified as a compact SUV, with a fuel type of gasoline. The car's dimensions are 4519mm in length, 1831mm in width, and 1694mm in height, with a wheelbase of 2670mm. It is a 5-door, 5-seater SUV with a 6-speed manual transmission, a top speed of 195 km/h, and a turbocharged intake form.

[AdrielLynn]

Here's how I set up the horn sound for my Boyue's lock confirmation: After starting the vehicle, first locate the settings menu on the central control screen, then select the vehicle control or vehicle security option where you'll usually find door lock-related settings. Look for the lock confirmation sound or alarm sound switch and simply tap to enable it. If you can't find this option, try the key fob combination method: Stand outside the vehicle and simultaneously press the unlock and lock buttons for about 5 seconds until you hear a beep from the horn, indicating successful setup. This feature proves particularly useful when setting it up in underground parking lots at night - you get both light flashes and audible confirmation, eliminating worries about locating your car. However, be mindful of residential areas; I turn off this sound when returning late to avoid disturbing neighbors.

[DeValentina]

I remember when I first got my Boyue, I didn’t know how to activate the lock confirmation beep and had to check the owner’s manual to figure it out. The process is actually quite simple: With the vehicle powered on, tap the settings icon on the central display, navigate to the vehicle settings under the body configuration, and scroll down to find the ‘Lock Confirmation Sound’ option. Once enabled, you’ll hear a beep every time you lock the car remotely. If touchscreen controls aren’t your thing, there’s a manual method too: Press the lock button on the key fob twice in a row, then hold it down until the horn sounds. I recommend turning this feature on—especially on rainy days, hearing the confirmation beep is more reliable than just relying on the flashing lights.

[StPaul]

Last time, a friend who just bought a Borui asked me to help set up the car lock beep. The operation was quite smooth. After starting the vehicle, select 'Vehicle Settings' on the central control screen, enter the 'Lights and Sound Effects' menu, and finally check the 'Lock Beep' option to enable it. The entire setup process took only 2 minutes and required no professional tools. After setting it up, I tested the effect: pressing the lock button on the key fob outside the car triggered both the lights and a short beep. This feature is very user-friendly for those who often forget to lock their cars, as the sound reminder is more reassuring than just flashing lights.

[LeMia]

As a veteran owner of the Boyue for 3 years, here's my experience with setting the lock confirmation sound: First power on the vehicle without starting the engine, then enter the central control settings and select the Body Control option. Look for the lock feedback sound function in the Security Settings. Note that menu locations may vary slightly across model years - for the 2021 version, it's located under Comfort Settings. Once enabled, you'll get a clear audible confirmation every time you remotely lock the car, allowing you to verify the locking status from far away when returning from supermarket shopping. If the sound is too loud, you can easily disable it anytime by turning off the option in the same settings location.

[VonAnastasia]

The lock confirmation sound design of the Boyue is quite user-friendly. Here's how I set it up: Sit in the driver's seat and turn on the vehicle power (no need to start the engine). Swipe right on the central control screen to enter settings, select door lock settings under vehicle parameters, then enable the lock sound effect option at the bottom. With the key fob, you'll hear a beep when locking, accompanied by synchronized light flashes at night. I recommend keeping this feature on, especially in large parking lots - following the sound is much easier than spotting the lights. If menu options change after a system update, the safest approach is to refer to the vehicle's user manual.