How to Set the Auto-Dipping Function for the Reversing Mirror on the 2020 Sagitar?

[DiAdaline]

The method to set the auto-dipping function for the reversing mirror on the 2020 Sagitar: first, activate this function in the vehicle computer settings; second, manually rotate the knob to R, check the option in the central control, then adjust the mirror adjustment knob to R, and the right mirror will automatically dip when reversing. The 2020 Sagitar is equipped with two engines, one is a 1.2-liter turbocharged engine, and the other is a 1.4-liter turbocharged engine. The body dimensions are 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm. The front suspension uses a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension.

[JaxsonLynn]

I've been driving a 2020 Sagitar for two years, and setting the mirror tilt function for reversing requires three steps: First, start the engine and shift into reverse gear (R), then press and hold the mirror selection button (e.g., press the right button to adjust the right mirror) to let the mirror tilt down automatically. Immediately use the directional adjustment knob to position the mirror so you can clearly see the ground near the wheels. Finally, press and hold the memory seat button (1) and the SET button on the door for three seconds to save the position. After setup, every time you shift into reverse and press the same mirror selection button, the mirror will automatically tilt down. This feature is especially useful for parallel parking, as it allows clear visibility of the curb distance to the tires. Note that the mirror will automatically return to its original position if the vehicle speed exceeds 15 km/h. If the setup fails, it might be due to inactive memory seat settings or unstable battery voltage—recommend turning off the engine and repeating the process.

[OEmiliano]

The key to setting the rearview mirror tilt-down function on the Sagitar is to bind it with the memory seat. First, start the engine and shift into reverse gear, then press the left or right mirror selection button - the mirror will descend to its initial position. Keep holding the button while using the adjustment controls to position the mirror at approximately a 30-degree downward angle where you can clearly see the rear wheel and ground markings. Immediately after adjustment, press and hold the SET button on the door panel followed by a numbered memory button to save the setting. To test: engage reverse gear and press the mirror selection button - successful setup is confirmed if the mirror automatically tilts down. Note this feature is only available on electric-folding mirror models and may not be included in base trims. If malfunctioning, check if the memory seat linkage is disabled in the infotainment system, or try resetting the vehicle's electronic control system.

[SanTanner]

The operation is quite simple: Start the vehicle, press the brake, shift into reverse gear, and press the side mirror button you want to set. At this point, the mirror will move slightly. Immediately use the adjustment knob to manually tilt the mirror downward, aligning it to a position near the rear wheel—for example, adjust it until you can clearly see the parking lines. Finally, press the SET button plus a number key on the seat memory to save the setting. Next time you reverse, remember to press the same side mirror button after shifting into gear to trigger the movement. It's recommended to set this during the day for better accuracy, as rainy or nighttime conditions might make it hard to see the adjustment position. Over time, the tilt angle may shift, so simply reset it when needed.