···
Log in / Register

How to Set Cruise Control on the Equinox?

1Answers
DeAthena
07/24/2025, 12:27:28 PM

Here's how to set the cruise control buttons on the Chevrolet Equinox: ① Press the RES button. ② Use the SET button to set the cruising speed. Before activating cruise control, you should set the speed using this button (Note: Cruise control can only be activated at speeds above 30km/h). ③ The +/- buttons are used to control the cruise control speed, with + to increase and - to decrease. Here's some additional information about the autonomous driving system: The autonomous driving system mainly includes lane keeping and adaptive cruise control. Lane keeping is an auxiliary system to cruise control, which alerts the driver through steering wheel vibrations or alarms when the vehicle approaches lane markings. Adaptive cruise control uses radar monitoring to detect the driving conditions of the vehicle ahead, automatically slowing down or accelerating as needed.

Was this review help?
103
Share
More Q&A

What is the difference between the Tiguan and Tiguan L?

The differences between the Volkswagen Tiguan and Tiguan L are in tire specifications, engine models, body dimensions, and power. The specific details are as follows: Fuel consumption comparison between the Volkswagen Tiguan and Tiguan L: The fuel consumption difference between these two models is minimal, with urban driving typically maintaining around 9.0L. Safety features of the Volkswagen Tiguan L: The new Tiguan L uses high-strength steel in 76% of its body structure. Critical areas such as the A-pillars, B-pillars, cross beams in the front and rear footwells, and the central tunnel are made of hot-formed steel, reducing the vehicle's weight while increasing rigidity.
109
Share

How to Turn Off Hill Start Assist After It's Activated?

Hill Start Assist is a default-enabled feature that cannot be turned off. Below is some information about Hill Start Assist: This feature usually doesn't have a dedicated button. When stopped on a slope with the gear in drive position and the brake pedal released, Hill Start Assist will automatically activate. In some vehicles, the feature activates when the brake pedal is pressed. The braking duration lasts only a few seconds - if throttle isn't applied promptly, there's risk of rolling back. The Hill Start Assist system is typically integrated with the Electronic Stability Program (ESP). If the vehicle's ESP remains enabled, the Hill Start Assist function will also stay enabled by default.
113
Share

What Are the Solutions for High Fuel Consumption in Kia K3?

Automobiles can reduce fuel consumption by cleaning engine carbon deposits, checking the oxygen sensor, regularly replacing the three filters, and inspecting the electronic control unit. Specific methods to reduce fuel consumption: Cleaning engine carbon deposits: Excessive engine carbon deposits are a significant cause, mainly due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. If the effect is not obvious, it indicates a large amount of carbon deposits in the engine. In this case, the car must be taken to a 4S shop for professional technicians to clean the carbon deposits inside the engine. Checking the oxygen sensor: As an internal control unit of the car, the oxygen sensor primarily monitors the fuel-air ratio in the engine. Once damaged, it will cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. After the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gas during driving, at which point the oxygen sensor should be replaced. Regularly replacing the three filters: During vehicle use, the oil filter, air filter, and fuel filter must be replaced regularly. If not replaced for a long time, they become dirty and transmit incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits. Inspecting the electronic control unit: Although the engine's electronic control unit is highly reliable, in vehicles used for a long time, various faults are inevitable. Fuel consumption of Kia K3: The combined fuel consumption of Kia K3 is 5.3-5.4L/100km. There are currently 4 models of this car on sale. The Strive Connect Edition and Smart Drive Sport Edition have a combined fuel consumption of 5.3L/100km. The Fashion Edition, Youth Edition, and Renew Edition have a combined fuel consumption of 5.4L/100km. The above figures are NEDC combined fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, ranging from 6.3-7.5L/100km.
113
Share

What are the differences between the BMW X3 25i and 28i?

The main difference between the 25i and 28i lies in their powertrain. Although both are equipped with a 2.0T turbocharged engine, the 25i delivers a maximum power of 184 PS and a maximum torque of 290 Nm, while the 28i offers 224 PS and 310 Nm. In terms of performance, the 25i accelerates from 0-100 km/h in 8.9 seconds, whereas the 28i is one second faster at 7.6 seconds. Beyond the powertrain differences, the 28i comes with additional features such as sport seats, a full LCD instrument panel, ambient lighting, and the sport package version of the 28i also includes paddle shifters. Here are some additional details: 1. Powertrain: The 25i is powered by a 2.0T low-power engine with the code B48B20C. The B48 series is BMW's latest generation engine, featuring numerous upgrades over the previous N20 series, resulting in improved performance. The 28i is equipped with a 2.0T medium-power engine, model B48B20D. 2. Configuration: Both the X3 25i and 28i offer strong product capabilities. Both models come in sport and luxury package versions, with attractive designs and rich configurations. Standard features include cruise control, auto hold, hill descent control, and more. They also provide excellent comfort, spacious interiors, and supportive, well-cushioned seats. Additionally, they offer good handling, with full-time all-wheel drive as standard across the lineup.
110
Share

What does Audi Dynamic Mode mean?

Audi Dynamic Mode refers to the dynamic or sport mode. Here are the specific details: 1. Sport Mode: Equivalent to the S gear in other models, this mode features sensitive throttle response and heavier steering. The most notable characteristic is that the engine reaches higher RPMs before shifting, enhancing driving pleasure but also increasing fuel consumption. However, Audi's Dynamic Mode goes beyond this, incorporating Audi's unique dynamic steering system and Audi damping control system. Fuel consumption is approximately one-third higher than in normal automatic mode. 2. Operation Mode: The new Audi A4L has its front axle moved forward by 154mm, resulting in optimized weight distribution and a longer wheelbase, significantly improving handling performance and interior space comfort. The steering gear is positioned lower and closer to the front wheels, delivering more direct steering effects and more precise and responsive handling. Additionally, the driving mode options include Comfort, Dynamic, and Auto, with easy switching between modes at the touch of a button.
110
Share

What are the differences between the Mercedes-Benz E260 and E300?

The differences between the Mercedes-Benz E260 and E300 are: 1. Different acceleration times: The 0-100 km/h acceleration time for the E260 is 8.7 seconds, while the E300 achieves it in 6.6 seconds. 2. Different top speeds: The E260 has a top speed of 230 km/h, whereas the E300 reaches 250 km/h. 3. Different power outputs: The E260 is equipped with a 2.0t low-power engine with a maximum power output of 135 kW, while the E300 features a 2.0t high-power engine delivering 190 kW. Both the E260 and E300 belong to the mid-to-large-size sedan category, with identical body dimensions: length 5021mm, width 1854mm, height 1487mm, and a wheelbase of 3014mm.
110
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.