How to reset the tire pressure warning light on the New Bora?

[FrankDella]

The methods to reset the tire pressure warning light on the New Bora are: 1. Visit a 4S shop and have the maintenance personnel use professional equipment to reset it; 2. Press and hold the tire pressure monitoring button to reset it. Taking the 2021 Comfort Smart Edition as an example, its body dimensions are: length 4663 mm, width 1815 mm, height 1462 mm, with a wheelbase of 2688 mm. The 2021 Comfort Smart Edition is equipped with a 1.2T turbocharged engine, paired with a 7-speed dual-clutch transmission, delivering a maximum horsepower of 116 hp, a maximum power of 85 kW, and a maximum power speed of 5000 rpm.

[McRebecca]

I remember once the tire pressure warning light came on in my new Bora, which really made me nervous. First, I had to find a safe place to pull over and check all the tire pressures with a tire pressure gauge. The front tires were around 2.3 bar, and the rear tires were about 2.1 bar, referencing the label on the door frame. After confirming everything was fine, I got back in the car, turned the key to the ignition position without starting the engine. Then, using the menu button on the right side of the steering wheel or the controller on the dashboard, I navigated to the vehicle or maintenance options in the settings, selected the tire pressure monitoring system, and clicked reset or save current settings. Don't forget to check the spare tire too, as it might trigger the warning. Once the light went off, I drove a few kilometers to test it, and that was it. The tire pressure warning is really useful, reminding you to inflate the tires in time to avoid wear or accidents.

[LaAutumn]

Over the years with my new Bora, the tire pressure warning light has become a common sight. My approach is straightforward: first, measure the tire pressure to correct any deviations. If everything checks out, proceed to the car. Turn the key to the ignition position without starting the engine. Use the buttons on the steering wheel to navigate to the settings menu, select the tire pressure option, and confirm to reset. The spare tire can be ignored unless there's an issue. If the light continues to flash, it might indicate a sensor malfunction requiring a visit to the shop. The key is not to delay, as incorrect tire pressure can increase fuel consumption and the risk of a blowout. With practice, this routine takes just a few minutes to resolve.

[Rebecca]

The tire pressure warning light must be addressed immediately as it concerns safety! The procedure is clear: first, check that all tire pressures meet the standard, then park the vehicle. Turn the ignition switch to the position where the dashboard is activated but the engine is not started. Use the turn signal lever menu to access the tire pressure reset settings. Ensure the ground is level during operation. Once completed, drive to verify that the light turns off. Do not overlook the importance of tire pressure—it can prevent accidents and extend tire life.

[RoseAnn]

The tire pressure monitoring system of the New Bora is based on wheel speed changes. The light indicates a significant pressure difference. First, measure the pressure of each tire (e.g., 2.2-2.3 bar) and adjust accordingly. Then, with the car stationary and the ignition on, enter the vehicle system settings and select TPMS reset. This can be easily done via the steering wheel menu or instrument panel navigation. The system will automatically calibrate. It's simple and easy to avoid faults.

[VonRylee]

I make it a habit to prevent tire pressure warnings. When the light comes on, I check the tires, resolve any issues, and then reset the system. With the car parked, I turn the key to the ignition position without starting the engine, use the steering wheel buttons to navigate to the system menu, find the vehicle maintenance option, and select 'save tire pressure.' Usually, the light turns off automatically within a few dozen seconds. I measure the pressure weekly to minimize such issues, and addressing warnings promptly ensures safety and efficiency.