How to Reset the Tire Pressure on the New Magotan?

What is the difference between 30 and 40 viscosity grades for motor oil?

40-grade motor oil has a higher viscosity than 30-grade motor oil. The larger the number, the higher the viscosity of the oil and the higher the maximum applicable temperature. The SAE (Society of Automotive Engineers) viscosity rating refers to the standards set by the Society of Automotive Engineers in the United States, which are universally adopted worldwide. Oil viscosity is the most important characteristic of motor oil, simply put, it is the resistance of a fluid when flowing. Generally, terms like 'thick' or 'thin' refer to the size of the viscosity. Neither too high nor too low viscosity is good for engine oil; 'the right viscosity' is the best. This is because both excessively high or low viscosity have the following disadvantages: 1. If the viscosity is too high, the oil is thicker and cannot be quickly delivered between parts in a short time, which increases wear during startup, makes cold starts difficult, reduces cleaning and cooling effects, and leads to greater power loss and increased fuel consumption. 2. If the viscosity is too low, the oil is thinner and cannot effectively adhere between parts, resulting in poor lubrication, anti-wear, and sealing effects, and also increases oil consumption. 3. In theory, as long as the oil does not deteriorate and is of good quality, its oil film will persist, fully utilizing the oil's performance to protect your vehicle. 4. However, if the oil contains too much water, its lubricity will deteriorate, viscosity will decrease, and the anti-friction effect of the oil film will weaken, inevitably leading to oil deterioration and potentially more serious accidents, such as engine seizure or bearing failure.

102

Share

What is the appropriate range for engine speed to maintain?

Engine speed is generally appropriate when maintained between 1000 and 3500 RPM. Around 3000 RPM, the engine delivers maximum torque, after which torque decreases inversely with speed. Therefore, it is generally advisable to drive with the engine speed around 3000 RPM. An engine is a machine capable of converting other forms of energy into mechanical energy. The first external combustion engine was invented by R. Stirling of Scotland in the UK and later improved by Watt into a steam engine. Engines can refer to both power generation devices and the entire machine including the power unit (such as gasoline engines, aircraft engines). Types of engines include internal combustion engines (e.g., gasoline engines), external combustion engines (e.g., Stirling engines, steam engines), gas turbines (used in racing cars), and electric motors.

111

Share

How to Reinstall a Fallen Interior Rearview Mirror?

Generally, factory-installed rearview mirrors do not fall off under normal use unless heavy objects such as pendants or dashcams are hung on them. Remove these before reattaching. There are specialized double-sided tapes for rearview mirrors—simply peel off the backing paper. Scrape off any residual adhesive from the mirror. Additionally, there are AB adhesives specifically designed for rearview mirrors on the market, which must be mixed before use.

101

Share

How to Match Gears with Speed in a Manual Transmission Car?

Manual transmission cars require matching gears with speed as follows: 1st gear at 15 km/h; 2nd gear at 25 km/h; 3rd gear at 35 km/h; 4th gear at 55 km/h; and 5th gear at 65 km/h or above. A manual transmission, also known as a manual gearbox, is a type of gearbox, and it is one of the most basic types in automotive transmissions. The function of a manual transmission is to change the gear ratio, also known as the gear ratio, which uses the principle of leverage to amplify engine torque with larger diameter gears in lower gears to assist the vehicle in starting forward movement. A manual transmission consists of the gear transmission mechanism, the gearbox housing, and the control mechanism.

119

Share

How often should normal car tires be inflated?

Normal car tires should be inflated every 1 to 2 months, and car owners should always keep an electric air pump and tire pressure gauge in their vehicles. Generally speaking, as long as there are no obvious abnormalities in the tire sidewalls, it is sufficient to check the tire pressure weekly. It is recommended to pay attention to tire pressure, rather than waiting until the tires appear flat before going to a car wash for inflation. By that time, the tires may already be severely underinflated, with the sidewalls lacking the necessary support. This not only increases fuel consumption but also causes greater tilt during turns, and there is a higher risk of tire overheating and blowouts during high-speed driving. Strictly speaking, tire pressure refers to the air pressure inside the tires, and the level of tire pressure plays a crucial role in the performance and power of the car.

118

Share

How are the license plates ABCD EF arranged in Jiangsu?

Jiangsu license plates ABCD EF are arranged as follows: The Chinese character at the beginning of Jiangsu's vehicle license plates is "Su", and the letter following the Chinese character represents various cities in Jiangsu. Su A represents Nanjing, Su B represents Wuxi, Su C represents Xuzhou, Su D represents Changzhou, Su E represents Suzhou, Su F represents Nantong, Su G represents Lianyungang, Su H represents Huaiyin, Su J represents Yancheng, Su K represents Yangzhou, Su L represents Zhenjiang, Su M represents Taizhou, Su N represents Suqian. License plates are panels hung on the front and rear of the vehicle, usually made of aluminum, iron sheet, plastic, or paper, engraved with the vehicle's registration number, registration area, or other relevant information.

110

Share