···
Log in / Register

How to reset the maintenance reminder on Lavida Plus?

6Answers
EloiseMarie
07/29/2025, 09:21:13 AM

The method to reset the maintenance reminder on Lavida Plus is: 1. Turn off the ignition; 2. Press and hold the 0.0 button at the bottom right corner with your left hand; 3. Turn on the ignition with your right hand while keeping the left hand pressed; 4. A non-flashing wrench symbol will appear on the dashboard; 5. Release the left hand and press the button at the bottom left corner once; 6. The wrench symbol will disappear. Taking the 2021 Volkswagen Lavida as an example, its body dimensions are: length 4670mm, width 1806mm, height 1474mm, with a wheelbase of 2688mm. The 2021 Volkswagen Lavida is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.

Was this review help?
111
Share
CarlosMarie
08/13/2025, 11:42:22 PM

I just bought a Lavida Plus, and the maintenance reminder light keeps bothering me. I remember trying this method: first, sit in the car and turn off the engine, then press and hold the small knob at the bottom right of the dashboard (usually labeled 0.0). Next, turn the key to the 'on' position without starting the engine, keep holding the button for about 10 seconds, and the dashboard will flash once to indicate the reminder is gone. That's it. Actually, this is similar to the reset process for most Volkswagen models. The button might vary slightly depending on the Lavida Plus version, but checking the manual is always the right move. I often think, this reminder is to prompt us to change the oil and check the brakes regularly. If we ignore it, the car will wear out faster, and repairs will be more expensive. Developing a habit of monthly self-checks can save a lot of money.

Was this review help?
11
Share
Expand All
AlyssaFitz
10/09/2025, 10:33:57 PM

Having driven for over a decade, I know resetting maintenance reminders requires caution. For the Lavida Plus, here's the proper method: Turn off the ignition, keep holding the dashboard button, then turn the key to ON position without starting the engine. Watch the screen until the red warning light disappears. Avoid using excessive force - a broken button causes bigger headaches. Many drivers ignore these reminders, thinking a few days' delay won't matter, only to face doubled repair costs from engine overheating or transmission issues later. My advice? Set phone alarms aligned with maintenance schedules. After resetting, drive 20km to verify system normality. Safety comes first - don't risk driving distracted by warning lights.

Was this review help?
1
Share
Expand All
ValeriaFitz
11/22/2025, 10:45:21 PM

My car had this issue too, and it's easy to fix. Close the ignition switch, locate the round button in the middle of the dashboard and hold it down. Turn the key to the on position without starting the engine, and after about 10 seconds the warning should disappear. The button position might vary in Lavida Plus, but the operation isn't complicated. When the maintenance reminder lights up, deal with it promptly - change the engine oil for peace of mind.

Was this review help?
10
Share
Expand All
AnthonyRose
01/13/2026, 12:21:34 AM

As someone who frequently tinkers with cars, the Lavida Plus maintenance reminder reset is preset in the instrument system. First, turn off all power, press and hold the SET button on the combination meter for 5 seconds, then turn the power to the ACC position and continue holding until the screen prompts for clearing. If there's a signal malfunction, try disconnecting the battery cable, but avoid frequently tampering with the circuits as it may affect the car's system. It's recommended to regularly visit a 4S shop for inspections to prevent software bugs from interfering with driving.

Was this review help?
10
Share
Expand All
VanJameson
04/09/2026, 03:49:22 AM

I use my Lavida Plus for daily commuting, and when the maintenance light comes on, I quickly take care of it. After turning off the engine, hold down the small button on the left side of the dashboard, turn the key to the start position without starting the car, wait a few seconds, and the light will go out. Don't find it troublesome; ignoring the maintenance reminder can lead to increased engine carbon deposits and higher fuel consumption. I reset it every six months, and it gives me peace of mind when going on long trips.

Was this review help?
16
Share
Expand All
More Q&A

If the reversing camera is broken, is it enough to just replace the camera?

If the reversing camera is only damaged, then replacing just the camera should suffice. However, there are many factors that can cause imaging abnormalities, and it may not necessarily be due to the camera itself. In such cases, even after replacing the camera, the imaging of the reversing camera may still be abnormal. It is recommended to seek professional inspection and repair. Below are the reasons why the reversing camera may not respond: 1. Poor contact in the wiring and switch: If the connection cable between the camera and the vehicle display falls off, or if the switch of the reversing camera is damaged, there may be an issue with the display. In such cases, the wiring needs to be reconnected, and if necessary, a new switch should be replaced. 2. Module malfunction: There are many reasons for the reversing camera module to malfunction, including system disorder, module producing garbled code, or formatting of the reversing camera. In such situations, it is necessary to visit a repair shop for professional inspection.
120
Share

How Long Does It Take for a Car to Fill with Water When Submerged?

It depends on the water level. Generally, if the water level is above the car, it will take about half an hour to fill up. Here is some relevant information: Escape Method: If the car falls into a river, do not immediately open the door or window, as a large amount of water will rush in, making it impossible to escape. At this point, there is still enough air inside the car, and the water inflow is relatively slow. When the water inside the car reaches a certain depth, you can break the window to escape. Before that, take deep breaths and remain calm. Best Time to Open the Door: Wait until the car is completely filled with water, as the pressure difference between the inside and outside will balance, making it easy to open the door. After escaping the vehicle, keep your head above water and relax your body.
108
Share

What are the markings that allow U-turns on the road?

On the road, the markings that allow U-turns are white dashed lines or yellow dashed lines. When making a U-turn, you should turn on the left turn signal in advance, the maximum driving speed should not exceed 30 kilometers per hour, and you must not hinder other vehicles and pedestrians traveling normally. The situations where U-turns are prohibited are as follows: U-turns are prohibited where there are 'No U-turn' signs or 'No Left Turn' signs: As long as there is a sign prohibiting U-turns, then U-turns are not allowed at that intersection. The action of making a U-turn is also an extension of a left turn, so if there is a sign prohibiting left turns at an intersection, then U-turns are also prohibited there. U-turns are prohibited at crosswalks: U-turns are prohibited at crosswalks. If at an intersection where U-turns are allowed, you must cross the crosswalk before making a U-turn, and you cannot make a U-turn on the crosswalk. U-turns are prohibited when there is no left turn lane: Even if you are in the leftmost lane, if there is no sign allowing left turns, U-turns are also not allowed. U-turns are prohibited within the second left turn lane line: When a vehicle is stopped in the second left turn lane, it cannot make a U-turn. In the absence of any directional signs, vehicles can only make U-turns in the innermost left turn lane.
111
Share

How is the quality of GAC Trumpchi?

GAC Trumpchi's quality is considered good among similar vehicle types. It boasts high durability and provides a favorable driving experience. Below is a detailed introduction about Trumpchi vehicles: Overview: GAC Trumpchi (abbreviated as Trumpchi) is a domestic brand created by GAC Group to enhance core competitiveness and achieve sustainable development. In December 2010, the first model, the Trumpchi GA5 sedan, was successfully launched in the market, followed by multiple models. Features: GAC Trumpchi is the first independently developed vehicle by GAC Group, targeting the mid-to-high-end market. Adhering to the brand philosophy of 'Building good cars for loved ones and filling the world with love,' it integrates GAC Group's resources and experience, persists in independent innovation, and is committed to developing vehicles suitable for Chinese driving habits and road characteristics.
101
Share

What Type of Gasoline Should a BMW Use?

BMW requires 97-octane gasoline because its engine configuration is high-performance and needs higher-purity gasoline to unleash its full power. Engine Requirements: BMW engines require 97-octane gasoline to prevent knocking. Using 93-octane gasoline may cause premature aging of the car's three-way catalytic converter and varying degrees of damage to the sensors. 97-Octane Gasoline: 97-octane gasoline is composed of 97% isooctane and 3% n-heptane, making it a high-purity fuel. The density of 97-octane gasoline is 0.737g/ml, with approximately 0.678 liters per kilogram.
110
Share

Are the Three Major Components of Touareg, Cayenne, and Q7 the Same?

Cayenne and Touareg share the same three major components. Below is an introduction to the Porsche Cayenne: Porsche Cayenne: As a 5-seater super SUV, the Porsche Cayenne Turbo S is equipped with a powerful 520-horsepower turbocharged engine, combined with a dynamically tuned chassis to satisfy enthusiasts of high-performance cars, and offers a highly acclaimed all-wheel-drive system. With this, the Porsche Cayenne Turbo S sets a new standard for SUV performance. In terms of power: The entry-level Porsche Cayenne's displacement has been increased from 3.2 liters to 3.6 liters, with maximum horsepower rising to 290 hp (an increase of 40 hp), while maintaining a high level of maximum torque at 39.3 kg·m. It accelerates from 0 to 100 km/h in 8.1 seconds and has a top speed of 227 km/h, compared to the older model's figures of 9.1 seconds and 214 km/h.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.