How to Put the Power Mode of Haval H6 into ON Position?

[VanLeilani]

Press the start button without stepping on the brake pedal to put the power mode of Haval H6 into the ON position. If you press the start button while stepping on the brake pedal, the engine will start directly. The ON position of Haval H6 corresponds to the power mode where the vehicle dashboard lights up, but the engine does not start. Additional Information: 1. Function of the ON Position: In a car, the ON position means that after switching to this position, it provides power support to all electronic devices in the car. Simply put, this function connects all the car's electrical appliances to the battery. 2. Car Ignition Switch: The car ignition switch has four positions: START, ON, ACC, and LOCK. LOCK can secure the steering wheel; ACC can turn on some electrical components, such as the radio; ON connects all electrical components in the car, and this is the position during normal driving; START is the position for ignition when starting the engine.

[AlyssaRose]

For setting the power to ON position in the Haval H6, I often operate this car myself and find it quite simple. First, you need to sit in the driver's seat, make sure the key is inside the car or within sensing range, then without pressing the brake pedal, simply press the start button next to the steering wheel once. The first press will put it into ACC mode, which only powers the radio and similar devices. Pressing it a second time switches to the ON position, where all dashboard lights come on, and the entire car is powered up but the engine doesn't start. The ON position can be used for charging power banks, turning on the audio system, or checking fault codes, which is quite convenient. However, be careful not to stay in the ON position for too long to avoid draining the battery—just a few minutes before starting or shutting down the car. From a safety perspective, setting it to ON when parked facilitates problem diagnosis and prevents accidental starts. Additionally, the Haval H6's design is very user-friendly, with smooth operation and a good tactile feel.

[MacJason]

Power switching for the Haval H6: I've studied automotive circuits and understand the principle of staged activation. The ON position is the point where all vehicle systems are powered. During operation, place the key in the sensing area, sit in the seat, avoid pressing the brake pedal, and press the engine start button once to enter ACC mode. Press it again to reach ON mode. At this point, the dashboard self-check lights will illuminate, indicating the vehicle is ready but not started. The ON state is suitable for system preheating or using the onboard charger. Remember the difference between ON and START: you must press the button while holding the brake to start the engine. There's a slight click sound when pressing the button to confirm mode changes. Avoid leaving the vehicle in ON position for more than ten minutes continuously to prevent excessive battery drain affecting the next startup.

[GideonDella]

When driving my Haval H6, it's easy to engage the ON position: Sit firmly in the driver's seat, don't press the brake pedal, and simply press the start button twice. The first press partially powers the ACC, and the second press fully powers the ON position. At this point, the lights will come on and it's ready to use. Avoid leaving it on for too long to prevent wasting battery power.

[DelAubrey]

Using the Haval H6 to set the power to ON, prioritize safety. First, ensure the vehicle is stationary and do not press the brake pedal. Press the engine start button twice to enter ON mode. This state allows you to test electronic devices or perform emergency charging. However, finish quickly, as prolonged use in ON mode can drain the battery and even cause starting difficulties. Before exiting the vehicle, always switch back to OFF to prevent battery drain. Haval's sensing system is reliable and the operation is simple.

[LaLondyn]

As a family user, I find the power ON mode of the Haval H6 very convenient for daily use. With the keyless system, just keep the key in your pocket, sit in the driver's seat without pressing the brake, and press the start button once—ACC powers the media functions. Press it a second time to reach the ON mode. All dashboard lights illuminate, and the air conditioning and audio system become operational. For key-start models, simply turn the key to the second position. In ON mode, you can leisurely listen to music or charge your phone. Remember not to prolong the ON mode; it's better to start or turn off the engine when parked to save battery.