···
Log in / Register

How to reset the maintenance reminder for Wey VV5?

6Answers
KiraDella
07/29/2025, 12:00:30 PM

To reset the maintenance light on the Great Wall VV5, the driver must first enter the driver's seat and ensure all doors are securely closed. Locate the maintenance reset button - it's the one with two symbols. Press and hold this button continuously. Simultaneously, use your other hand to turn the ignition key.

Was this review help?
117
Share
VanAnnie
08/15/2025, 12:06:55 AM

I've been driving this WEY VV5 for almost three years now, and resetting the maintenance reminder has become second nature to me. First, turn off the ignition, then press and hold the TRIP button on the left side of the steering wheel without releasing it. Next, turn the key to the ON position (without starting the engine), keep pressing for about five to six seconds, and the maintenance light will automatically go off. This procedure is quite simple, saving both time and money by avoiding trips to the repair shop. The key point is that you must reset it after every maintenance service, otherwise the alarm keeps beeping which is really annoying. Remember to check the manual to confirm the button position to avoid pressing the wrong one. I recommend new owners perform this reset both before and after maintenance to ensure accurate vehicle reminders, making driving more reassuring. Regular maintenance can extend the vehicle's lifespan – I check mine monthly and it's always in good condition.

Was this review help?
2
Share
Expand All
PatrickFitz
10/12/2025, 01:10:42 AM

As a new WEY VV5 driver, I was quite nervous during my first maintenance reminder reset. Simply put: After parking and turning off the engine, hold down the TRIP button on the dashboard without releasing, turn the key to the power-on position (but don't start the engine), and keep pressing for about ten seconds until the maintenance light disappears before letting go. I found a quiet spot to do this slowly - it's okay to make mistakes, you can always try again. After resetting, don't skip your scheduled maintenance. These reminders protect your car, and resetting them gives peace of mind. I've been learning basic car knowledge to avoid unnecessary trips to the dealership for minor issues. Make it a habit to check your dashboard before driving - prevention avoids major repairs.

Was this review help?
1
Share
Expand All
RoseMarie
11/25/2025, 01:13:57 AM

As a car enthusiast, I find studying the maintenance reset procedure for the WEY VV5 quite fascinating. After turning off the engine, immediately press and hold the TRIP button, then turn the key to the ON position, hold steady for a few seconds, and the system will automatically reset. This design is both logical and efficient – if you can DIY, no need to rely on mechanics. Let's talk about the principle behind it: resetting is equivalent to clearing the maintenance memory data in the car's computer, ensuring timely reminders for the next service. This is beneficial for long-term vehicle health. I regularly reset the maintenance records, and it makes driving much more worry-free. Learning these small tricks can really save a lot of expenses – I recommend fellow car enthusiasts give it a try.

Was this review help?
6
Share
Expand All
StHaven
01/15/2026, 02:45:55 AM

Resetting the maintenance reminder for the WEY VV5 is super easy and quick. After parking and turning off the engine, immediately press and hold the TRIP button, then turn the key to the accessory position (without starting the engine). Keep pressing for about five to six seconds until the light goes off. Doing it yourself saves you from waiting in line at the repair shop, effortlessly solving daily hassles. After resetting, it's recommended to immediately check the engine oil or tire pressure to ensure proper maintenance. Don't overlook these small upkeep tasks—they keep your car running smoothly. Learning a bit of DIY knowledge can make your driving life more convenient and cost-effective.

Was this review help?
9
Share
Expand All
StLondon
04/11/2026, 10:29:41 PM

Maintenance reset is quite important for driving safety. I always keep this in mind when driving my WEY VV5. The reset steps are simple: turn off the engine, press and hold the TRIP button, turn the power to ON but don't start the engine, and keep holding until the maintenance light goes off. Resetting means you confirm the maintenance is done, which can prevent potential hazards. Don't turn off the reminder just to save trouble. I regularly reset the records, taking it as seriously as changing the engine oil. Here's a little tip: reset the reminder after maintenance, and the car will run more smoothly and fuel-efficiently. Daily maintenance is the cornerstone of safety—don't wait until a big problem arises to regret it.

Was this review help?
8
Share
Expand All
More Q&A

What are the differences between the Mercedes-Benz C180 and C260?

The differences between the Mercedes-Benz C180 and C260 are as follows: 1. Different power: The Mercedes-Benz C180 is equipped with a 1.6T inline 4-cylinder turbocharged engine with a maximum power of 115KW; the Mercedes-Benz C260 is equipped with a 1.5T inline 4-cylinder turbocharged engine with a maximum power of 135KW. 2. Different appearance: The Mercedes-Benz C180 has a single sunroof; the Mercedes-Benz C260, except for the sports version, all other models have a panoramic sunroof. 3. Different dimensions: The exterior dimensions of the Mercedes-Benz C180 are 4783mm in length, 1810mm in width, and 1442mm in height; the C260 has exterior dimensions of 4784mm in length, 1810mm in width, and 1457mm in height.
101
Share

How many seat belts are there in the back of a car?

If the car is a 5-seater, there are usually 3 seat belts in the back seat. The seat belt in the middle position of the back seat comes in two forms: one is a two-point type, and the other is a three-point type. The retraction points of these two types of seat belts are different from those of the seat belts on the two sides, so they are often overlooked. Here are the correct ways to use seat belts: When using a seat belt, first adjust the height of the seat belt. The shoulder belt must cross the middle of the shoulder. In the event of sudden braking, if the seat belt is too high, it will strangle the neck, and if it is too low, it cannot prevent the body from leaning forward. Moreover, the waist belt must be fastened below the abdomen, especially for pregnant women and overweight people. Incorrect usage can easily lead to injuries.
111
Share

What Are the Disadvantages of Stock Cars?

Stock cars parked for a long time may lead to the aging of equipment such as batteries, tires, and wiring, posing safety hazards. Here is some extended information about stock cars: 1. Stock Cars: There is no clear legal definition for stock cars, but the term "stock car" does exist in the automobile sales industry. Generally, it refers to vehicles that have been manufactured for more than 12 months, while those produced over 2 years ago are considered severely stocked cars. The manufacturing date is usually marked on the nameplate in the engine compartment, and the time elapsed since then indicates the actual stocking period of the vehicle. 2. Precautions When Purchasing a Car: If the contract does not specify the manufacturing date of the car, it is not possible to claim rights under the contract law; conversely, if the contract stipulates that the car must be new, you can request the seller to replace it with a new one on the grounds of breach of contract.
120
Share

What to Do If the Car ETC Falls Off?

If the ETC falls off, it cannot be used anymore. You need to bring the original vehicle, the ETC device, and the bound bank card to the ETC device installation location to reactivate the device. The ETC installation process is as follows: After receiving the device, first check whether the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly turn on. The OLED screen will display "Tag Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield to ensure the surface is smooth, clean, and dry. Then peel off the protective film on the back of the OBU and stick it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front facing the driver and the back facing the windshield, ensuring the chip is inserted into the OBU device.
112
Share

What are the symptoms of a damaged pressure plate?

Clutch pressure plate damage can cause the clutch disc to slip. Here are the specific details about the automobile clutch and pressure plate: 1. If the clutch disc slips, the engine cannot transmit all its power to the wheels, resulting in insufficient power for the vehicle. Therefore, once the pressure plate is damaged, it must be replaced immediately; otherwise, it will affect the normal operation of the car. 2. The clutch is a crucial component in the automobile transmission system, installed between the engine and the gearbox. The clutch can connect or disconnect the engine and the gearbox. 3. The clutch pressure plate is fixed to the engine flywheel, with the clutch disc positioned between the pressure plate and the flywheel. The pressure plate has a diaphragm spring that presses the clutch disc tightly. Once the pressure plate is damaged, it cannot be repaired and must be replaced with a new one.
107
Share

How many liters of engine oil does the Audi Q5 2.0T require?

Audi Q5 2.0T requires 4.5L of engine oil. The Audi Q5 is a mid-size SUV model developed based on the production platform of the Audi A4. The stylish exterior of the Audi Q5 continues the design style of the Audi Q7, with Audi's signature chrome-plated "big face" highlighting its fashionable and dynamic design. The integrated headlights make it look more lively than the A4 model. Below is an introduction to the Audi Q5: The Audi Q5 features a fashionable and beautiful exterior with smooth lines; the interior is finely crafted; it is equipped with rich and practical features; the space is spacious and practical; and its power and handling performance are quite good. The Audi Q5 is powered by a 2.0TFSI four-cylinder in-line engine, paired with a 7-speed Stronic dual-clutch transmission, delivering ample power output, smooth gear shifting, and quick acceleration.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.