How to reset the maintenance light on the Southeast DX7?

[HarrisonDella]

The method to reset the maintenance light on the Southeast DX7 is: 1. With the engine off, press and hold the trip odometer reset button; 2. Turn the ignition to the ON position, then release the trip odometer reset button, and the SERVICE indicator will appear on the display; 3. Pull out the minute button on the clock and turn it to the right, and the mileage will appear on the display; 4. Turn off the engine, then turn the ignition to the ON position. The Southeast DX7 is the first SUV product launched by Southeast Motors, with dimensions of 4530mm in length, 1900mm in width, and 1700mm in height, and a wheelbase of 2700mm. The front of the vehicle features an eagle-wing sporty design, balancing visual appeal and aerodynamics, with large-area matte black upper and lower grilles that enhance the overall look and visual impact.

[CarlosMarie]

I've just dealt with this issue. Resetting the maintenance light on the Soueast DX7 is actually quite simple. First, make sure the vehicle is completely turned off and the key is removed. Then, press and hold the TRIP button on the instrument panel without releasing it. At this point, turn the key back to the ON position to power up the instrument panel. Keep holding the button for about ten seconds until you see the small wrench icon on the dashboard flash and then disappear, indicating success. I've tried this on the 2017 model and it worked, but newer models might require stepping on the brake pedal during the operation. A reminder to everyone: take a photo of the instrument data before proceeding, just in case you accidentally clear the trip mileage—the total mileage won't be affected. If you really can't manage it, the dealership can handle it with a computer in just a minute, but doing it yourself can save you a trip.

[LaAlexander]

Maintenance light reset means resetting the reminder counter in the vehicle's computer. The method is simple: With the engine off, press and hold the TRIP button on the instrument panel, then turn the key to the ON position without starting the engine. After about 15 seconds, the maintenance light will go off—do not release the button during this time. The button location may vary for different model years of the DX7; older models have it at the lower left of the instrument cluster, while newer models may place it on the steering wheel. If the operation fails, it could be due to low battery voltage or the vehicle requiring a special procedure. I found that the 2019 model needs to be held longer, around 20 seconds, to take effect. It's recommended to refer to the owner's manual for detailed instructions—doing it yourself saves time compared to visiting a repair shop.

[BrookeDella]

Remember these three steps: Turn off the engine - Hold the TRIP button - Turn on the ignition. Keep holding for about 15 seconds until the maintenance light goes off, then it's done. For newer models, you may need to press the brake pedal during the operation. If the light remains on, try repeating the process once more. Button locations may vary by model year - my 2017 model has it on the left side of the instrument cluster. Make sure you're pressing the correct button. If you can't get it sorted, don't stress - just drive to a dealership or local repair shop. They can easily reset it with a diagnostic tool in no time.

[McAriel]

Here's how to reset the maintenance light on the Soueast DX7: After turning off the engine, press and hold the TRIP button on the instrument panel. Then turn the key to the ON position while continuing to hold the button for about 10 to 15 seconds until the wrench icon disappears. For safety, it's recommended to press the brake pedal during this operation. I've encountered several unsuccessful attempts, which turned out to be due to either insufficient button pressure or holding time being too short. A reminder to all owners: resetting only clears the warning indicator - you still need to perform oil and filter changes on schedule. Don't postpone maintenance just because the light is gone. Regular maintenance is crucial for engine longevity.

[VanJayce]

Resetting the maintenance reminder after service is essential for the system to recalculate the next service interval. The specific operation is as follows: After turning off the vehicle, press and hold the TRIP button on the dashboard while turning the key to the ignition-on position. Maintain this for about 15 seconds until the maintenance light disappears. This manual reset essentially informs the vehicle's computer that maintenance has been completed. Steps may vary slightly across different trim levels - premium versions may require pressing the brake pedal first. If the operation fails, it could be due to button contact issues or the system needing more time. First-time users should allow a 20-second buffer. After completion, always verify by starting the vehicle to confirm the warning light has indeed been deactivated.