How to reset the maintenance light on the Geely New Borui?

[OSabrina]

The method to reset the maintenance light on the Geely New Borui is: 1. Press and hold the small trip reset button; 2. Insert the car key and turn it to the position where the instrument lights come on, then release the button; 3. Press and hold the mileage adjustment button on the instrument panel for 2 to 3 seconds; 4. The maintenance reminder will then be turned off. Taking the Geely Borui 2021 model as an example, its body dimensions are: length 4986mm, width 1861mm, height 1513mm, wheelbase 2870mm, and minimum ground clearance 135mm. The Geely Borui 2021 model is equipped with a 1.8T turbocharged engine, with a maximum power of 135kW and a maximum torque of 300Nm, paired with a 7-speed dual-clutch transmission.

[ClaireLynn]

I just bought a new Geely Borui, and resetting the maintenance light is actually not difficult. Insert the car key, turn it to the ON position, but don't start the engine—just let it power on. Then, locate the TRIP button on the left side of the steering wheel, press and hold it for about 10 seconds, and the maintenance light on the dashboard will automatically turn off. After this operation, the onboard computer will reset the maintenance cycle, reminding you of the next oil change or inspection time. I've done this before with other cars—it's quite fun, like giving the car a little maintenance. If you don't reset it in time, the light will stay on, which can be distracting while driving and might even mislead you into unnecessary repairs. I recommend trying this after every maintenance to make it a habit. Geely's manual also provides detailed instructions, so you can refer to it if unsure, but my method is pretty universal and works fine.

[LaSophia]

As an ordinary car owner, let me share my experience on resetting the maintenance reminder light for the Geely New Borui. First, sit in the driver's seat and turn the key to ACC or ON position without starting the engine. Then, press and hold the small knob on the instrument panel or the button under the steering wheel (exact location varies by model) for a few seconds until the light goes off. This reminder is designed to prompt regular maintenance - if not reset, the blinking light can be annoying while driving and may even affect other system functions. I learned this method from online forums and it works well, plus it's a good opportunity to check your vehicle's condition. My advice: take your time during the operation. If the light persists, consult the manual to verify the steps. Just like family members, cars need proper care to keep running smoothly for years.

[DelRose]

As a new driver, the method to reset the maintenance light is actually quite simple. First, turn the key to the ON position without starting the car. Then, press and hold the TRIP button near the dashboard for about 5 to 10 seconds until the light disappears. This light is just a reminder that the maintenance interval has been reached—it's harmless. If not reset, it will stay on but won't damage the car. Stay relaxed while doing this; there's no risk if you make a mistake, and you can always try again. Remember to perform this reset after each maintenance—it's a good habit that saves both hassle and money.

[LaElle]

I've been driving for decades and remember clearly how to reset the maintenance light on the Geely New Borui. Turn the key to ON, but don't start the engine. Then, press and hold the button on the left side of the steering wheel or the reset button on the instrument panel until the light goes off. After resetting, the system will reset the maintenance counter to avoid false alarms. Veteran drivers say that not resetting the light can be annoying as it stays on constantly and may interfere with driving. The operation is simple and safe, so I recommend everyone try it themselves.

[DeQuinn]

Practically speaking, the maintenance light reset for the Geely New Borui is quite straightforward. Turn the key to the ON position without starting the engine, then press and hold the TRIP button for about 10 seconds until the light goes off. This operation resets the system reminder function to prevent unnecessary annoying alerts. It's advisable to ensure proper ignition before performing this. If the light doesn't go off, check the manual for details. After resetting, remember to note down the next maintenance time for easy scheduling. These small daily maintenance tasks, when mastered, save time and hassle.