How to Reset the Maintenance Light on Roewe 350?

[VanEli]

Roewe 350 maintenance light reset method: After completing the maintenance at a 4S shop, connect it to a computer to clear the light. The Roewe 350 is a compact 4-door, 5-seater sedan with body dimensions of 4521mm in length, 1788mm in width, 1492mm in height, and a wheelbase of 2650mm. It is equipped with a 1.5L naturally aspirated engine and a 5-speed manual transmission, delivering a maximum power of 80 kW and a maximum torque of 135 Nm. The drivetrain is front-engine, front-wheel drive, with a MacPherson strut independent suspension at the front and an H-type torsion beam non-independent suspension at the rear.

[Brayden]

As someone who frequently deals with maintenance issues, I know resetting the maintenance light on the Roewe 350 is quite simple: First, make sure the car is parked on a level surface and the engine is turned off. Then, press and hold the ODO TRIP button on the dashboard. Next, turn the key to the ON position without starting the engine, and wait patiently for 10 to 15 seconds. You’ll see the maintenance indicator light flash and then turn off—at this point, release the button. If it doesn’t work, it might be because the button wasn’t pressed firmly enough or the key wasn’t in the right position; trying a couple more times usually does the trick. By the way, this light is meant to remind you of regular maintenance. Resetting it doesn’t affect driving safety, but don’t delay maintenance to avoid engine issues. Like I often advise car owners, check the oil and filter every 5,000 kilometers to keep the car in top condition.

[SanViolet]

As a long-time Roewe 350 owner, I saved a lot of hassle by resetting the maintenance light myself last time. The steps are: Park and turn off the engine, hold down the odometer button without releasing, then turn the key to the ON position without starting the engine. Count to about ten seconds and the light will go off. The first time I tried, I was too hasty and forgot to turn off the engine, so the light remained on. Later, I carefully followed the steps and succeeded. It's cost-effective and convenient. I recommend resetting it promptly after routine maintenance to avoid distraction from the flashing light while driving. Also, note that low battery voltage might affect the reset effectiveness, so regular battery checks are crucial. After all, maintenance isn't just about oil changes.

[Lola]

Want to reset the Roewe 350 maintenance light? Here's my experience: Turn off the engine, press and hold the ODO TRIP button, turn the key to ON position without starting, hold for about 5-10 seconds then release the button. After the light goes off, try turning off the power. Simple and quick, you can do it yourself.

[LaLondyn]

I'm passionate about automotive technology, and the Roewe 350 maintenance light reset relies on the vehicle's computer signal reset. Specific operation: First, safely park the car, turn off the engine, press and hold the ODO button without releasing, then switch to ON mode; the system will receive the command and the light will go off. During the process, avoid pressing the wrong button or performing short operations, ensuring the circuit is normal; after resetting, remind me of the importance of regular maintenance, as each oil change can extend the engine's lifespan and avoid costly major repairs.

[JesseRose]

From a safety perspective, resetting the maintenance light avoids distractions while driving. The method is simple: turn off the engine, press and hold the ODO button, turn to the ON position and wait for the light to go off (about 10 seconds), then release. If the light is not reset and stays on, it won't affect driving but can be annoying; it's recommended to ensure the vehicle is stable before performing the operation and to reset it promptly after maintenance. Develop good habits, such as checking the vehicle system every six months to ensure everything runs smoothly.