How to reset the maintenance light on Renault Kadjar?

[StPhoebe]

Renault Koleos maintenance light reset steps: 1. First, keep the Koleos in ignition-on mode with the engine off. 2. Use the right-hand stalk on the steering wheel to locate the maintenance interval, then long-press the OK button to enter the options. 3. The display will then show the mileage and time remaining until the next maintenance. Long-press the OK button again until 5000 km/6 months is displayed, completing the maintenance light reset. Old Renault Kadjar maintenance light reset steps: 1. First, keep the ignition switch in ON position with the engine off. 2. Then navigate to the remaining maintenance mileage interface and briefly press the button in the middle of the wiper stalk until "0KM" appears on the instrument display. 3. Long-press the button on the instrument panel for about 5 seconds until "5000KM" is displayed, then release the button to complete the maintenance light reset.

[DiPaige]

Here's how I do it after self-maintenance: With the engine off, press the start button twice to power on. Don't panic when the yellow wrench light appears on the dashboard. Locate the small button at the lower right corner of the dashboard, use a paperclip to hold it for 30 seconds, and the odometer will change from a countdown to dashes. Note that newer models with touchscreens might require entering engineering mode: simultaneously press the menu button and volume button on the steering wheel to access the hidden menu, then find the maintenance reset option under the 'Vehicle' section. After making changes, it's recommended to start the car and test drive for five minutes to ensure the warning light completely disappears before driving away.

[DeAdriana]

Veteran driver shares experience: Don't start the engine! Just power on the electrical system. Press and hold the rotary knob button on the right side of the dashboard (the one used to toggle trip display) with your left hand, then press the start button twice with your right hand until the dashboard warning light turns yellow. Count to about 8 seconds until you hear a 'beep' sound, and the odometer will display dashes indicating success. It's recommended to drive a few kilometers after maintenance before resetting, otherwise the warning light may come on prematurely next time. Last week in the car owners' group, someone's warning light came back after three months post-reset - it turned out the wrong engine oil specification was detected by the system during previous maintenance. Final reminder: After resetting, remember to drive around for a while - some models require completing 2 kilometers to save the settings.