How to reset the maintenance light on Geely Vision X6?

[EllianaMarie]

There are two methods to reset the maintenance light on Geely Vision X6: one is self-resetting, and the other is by matching with an automotive computer diagnostic tool for elimination. Here are the details about resetting the maintenance light on Geely Vision X6: Self-resetting: Long press the mute button on the right side of the steering wheel, then a prompt to short press the MODE button will appear to activate the menu. After entering the menu via the MODE button, proceed with the operation. Elimination by matching with an automotive computer diagnostic tool: Connect to a diagnostic computer or directly set it up on the vehicle. After maintenance, manually cancel the prompt to reset it for the next cycle.

[StIsabelle]

I used to encounter this issue, and resetting the maintenance light myself was quite straightforward. First, you need to sit in the driver's seat with the key not inserted and the vehicle completely powered off. Then, press and hold the TRIP button on the left side of the steering wheel, which is the small reset button on the instrument panel. Next, turn the key to the ACC position—don't start the engine, just power on the electrical system. Keep holding the TRIP button for about 5 to 10 seconds while watching the instrument panel. The maintenance light will automatically turn off, and you can release the button once it's done. If it doesn't work, the button location might be incorrect—check the owner's manual, as button positions vary slightly between models, but this method generally works for the Geely Vision X6. After resetting, don’t forget to schedule maintenance promptly. The light is a reminder to change the oil, and ignoring it long-term can harm the engine. DIY saves time and money, but be careful not to tamper with other circuits to avoid accidentally triggering safety systems.

[VonJudah]

I successfully reset the maintenance light for my Geely Vision X6 using this method in one go. Sit in the car, turn off the power, and take out the key and set it aside. Locate the small TRIP button on the instrument panel and hold it down firmly. Then turn the key to the accessory position without starting the engine, wait a few seconds until the light goes out, and release. This whole process takes at most two minutes—super convenient. Even after resetting, make sure to actually maintain the car, like changing the oil and filter, to avoid increased fuel consumption or part wear in the future. I think regular maintenance is crucial for extending the car's lifespan. Don’t be afraid to try and make mistakes when resetting it yourself—at first, my hands were shaky and I pressed the wrong button, causing the light to flash a few times without turning off, but trying a couple more times did the trick. Just stay patient and avoid touching any wiring while the power is on.

[VonJohnny]

Resetting the maintenance light on the Geely Vision X6 is quite straightforward, and I've tried it several times. First, completely power off the car without inserting the key. Then, press and hold the TRIP button on the dashboard without releasing it. Next, turn the key to the ACC power-on position, but do not start the engine. Wait for about five seconds, and the maintenance light on the dashboard will turn off. At this point, release the button to complete the process. After resetting, remember to take the car to the repair shop for maintenance tasks, as the light reset is just a reminder that it's time. There's no risk in doing it yourself, just be steady with your hands since the button is a bit small. Regular maintenance makes the car more durable.

[SanViolet]

I've thought about this issue, resetting the maintenance light must follow the correct procedure. After the car is completely powered off, hold down the TRIP button, turn the key to the ACC position without starting, and hold for a few seconds until the light goes off to complete the reset. This design is quite smart, reminding owners to perform timely maintenance. After resetting, it's time to change the engine oil. From my experience, with the Geely Vision X6, after prolonged use, you need to pay attention to other components. For example, aging sensors can also cause false alarms of the light coming on. Resetting it yourself is just a small trick. I recommend cleaning the dashboard dust before operation to make the buttons more responsive. After resetting, prioritize scheduling vehicle repairs to ensure the car's health. Overall, it's safe and reliable, no need to seek professional help.

[Jaden]

Resetting the maintenance light on the Geely Vision X6 is quite simple, as I've taught a friend before. First, turn off the ignition and disconnect the power. Then, press and hold the TRIP button on the dashboard without releasing it. Next, turn on the power without starting the engine, and the light should go off in about five seconds. Make sure to press the button accurately, as the dashboard may vary slightly depending on the Vision X6 model. After resetting, don't neglect maintenance—act promptly when it's time, such as changing the engine oil to prevent carbon buildup. I think every car owner should know this basic operation—it saves time and effort. If you encounter an issue, like the light not turning off, just try a couple more times—don't panic or attempt repairs while the power is on. Maintaining good long-term vehicle condition is key.