How to reset the maintenance light on Geely Emgrand GL?
2 Answers
Method to reset the maintenance light on Geely Emgrand GL: 1. With the ignition switch turned off, hold down the trip reset button without releasing it; 2. Insert the car key and turn it to the position where the instrument lights come on, then release the trip reset button and wait for the maintenance light to go off; 3. If the above method doesn't work, there is a button on the dashboard used to adjust the mileage. Hold this button for 2 to 3 seconds while the engine is idling; 4. Once the maintenance reminder is turned off, the maintenance reset is complete. The Geely Emgrand GL measures 4725 mm in length, 1802 mm in width, 1478 mm in height, and has a wheelbase of 4725 mm.
I've been driving the Emgrand GL for several years, and the maintenance light reset operation is quite common. First, you need to turn off the ignition switch to ensure the car is completely powered off; then press and hold the TRIP button at the lower right corner of the dashboard without releasing it; next, turn the key to the ON position without starting the engine; at this point, the dashboard will start a countdown, usually about five seconds; when you see the wrench icon flash twice and disappear, it means the reset is successful. I was a bit nervous the first time I did it, but after trying a few more times, I got the hang of it—the whole process takes less than half a minute. Before resetting, it's best to confirm that the maintenance has indeed been done, otherwise masking the actual vehicle condition isn't good for the engine. Keeping up with regular maintenance ensures the car stays in good condition and gives you peace of mind while driving.