How to Reset the Maintenance Light on Chery Fengyun 2

[Lilah]

The method to reset the maintenance light on Chery Fengyun 2 is as follows: 1. Close all doors and turn the key to the OFF position; 2. Press and hold the maintenance reset button with your left hand, while simultaneously turning the key to the ON position with your right hand. Wait until all dashboard lights illuminate, and a flashing wrench symbol will appear on the dashboard; 3. Release the left hand and press the A button once. The wrench symbol will disappear, indicating the reset is complete. The Chery Fengyun 2 has dimensions of 4188mm in length, 1686mm in width, and 1480mm in height, with a wheelbase of 2527mm. It produces a maximum torque of 14 Nm and a maximum horsepower of 109. The vehicle is equipped with a 5-speed manual transmission, featuring a front MacPherson independent suspension and a rear torsion beam non-independent suspension.

[BentleyMarie]

I often encounter this issue when repairing cars. Resetting the maintenance light on the Fengyun 2 manually is quite simple. First, don't start the car; just turn the key to the ON position to light up the dashboard. Then, press and hold the small button at the bottom right corner of the dashboard, and turn the key to shut off the power. At this point, the dashboard will go completely dark, right? Don't let go of the button yet. Turn the key back to the ON position, and you'll see the maintenance reminder wrench symbol start flashing. Continue holding the button for about 5 seconds until it goes out. Finally, release the button and turn off the ignition. When you start the car again, that annoying little wrench should be gone. The whole process takes just 30 seconds, and there's no need to waste money at the 4S shop. Doing it yourself also helps you get familiar with your car's various functions.

[VanClara]

Last week, I just helped my brother reset the maintenance light on his Chery Fengyun 2. The design of this model is quite user-friendly. Sit in the driver's seat, turn the key to the 'ON' position (but don't start the engine). Then, simultaneously press the trip meter button and the round button next to it on the instrument panel with your right hand. Hold for about 3 seconds until you hear a 'beep' from the dashboard. At this point, the maintenance icon will start flashing. Immediately turn off the power and then turn it back on again to reset the maintenance light. The key is to quickly perform the power on/off steps twice - many people fail at this step. After resetting, it's best to check the next maintenance mileage setting in the menu. The default is 5,000 km, but for those who drive more, adjusting it to 7,000 km is more cost-effective.

[LeEzra]

Turning off the maintenance light yourself isn't difficult at all. That's exactly how I fixed it last time when the light came on in my car. Get in the car, close the door tightly, and press the brake pedal. Turn the key to the second position to illuminate all the dashboard lights. Locate the TRIP button on the left side of the steering wheel and hold it down. Then, with your left hand, turn the key to cut off the power. Keep pressing the TRIP button the moment the dashboard goes black. After restoring power, wait until the wrench symbol starts flashing before releasing the button. Remember, this only works when the key is in the power-on position. It might respond slower in winter, so be patient. After resetting, it's best to drive a short distance to test, as the system sometimes records the reset with a delay.

[Braylen]

The process to reset the maintenance reminder light on the Fengyun 2 involves some tricks. First, sit down and fasten your seatbelt, then turn the key to the ACC position and wait for the instrument panel to complete its self-check. Next, simultaneously press and hold the clock adjustment button and the trip meter reset button on the dashboard for 10 seconds without releasing. At this point, the tachometer needle will suddenly drop to the bottom and then bounce back—immediately turn off the power. Wait for three seconds and then turn the power back on; the wrench icon should now be off. Special note: If the battery has been replaced, the reset might fail, requiring you to drive 20 kilometers for the system to relearn. After completing the procedure, it's recommended to check the engine oil level. Even if the reset is successful, necessary maintenance should still be performed.

[AmaraLee]

Fix it in 3 minutes with this method: First, power on without ignition, quickly press the right selection button on the steering wheel five times while watching the dashboard self-check. Then simultaneously hold the TRIP button and the dashboard's protruding knob until you hear a prompt tone. Here's the key! Immediately power off, exit the vehicle, lock the doors, and wait three minutes to allow the ECU to fully reboot. Upon re-entering, you'll notice the wrench symbol has disappeared, with the next maintenance mileage displayed below the odometer. After resetting, it's best to take a highway drive to let the transmission relearn driving habits. Regularly check dashboard warning lights during car washes—while maintenance reset is a handy trick, timely servicing remains crucial.