···
Log in / Register

How to reset the maintenance light on a Zotye T700?

6Answers
LeKingston
07/29/2025, 02:08:17 AM

The method to reset the maintenance light on a Zotye T700: 1. Turn off the ignition switch; 2. Simultaneously press and hold both buttons on the instrument panel; 3. Turn the key to the position where all instrument lights illuminate; 4. Wait until the wrench light turns off; 5. Release both buttons, including the mileage reset button; 6. Turn off the ignition switch and then turn it back on; 7. The maintenance reset is now complete. The Zotye T700 is a mid-to-large-sized SUV, measuring 4748 mm in length, 1933 mm in width, and 1697 mm in height, with a wheelbase of 2850 mm. The Zotye T700 is equipped with two engines: a 1.8L turbocharged engine and a 2.0L turbocharged engine.

Was this review help?
117
Share
MacSara
08/12/2025, 05:09:28 PM

As a long-time owner, I've dealt with the maintenance light issue multiple times. The reset method for the Zotye T700's maintenance light is quite simple: First, ensure the vehicle is parked and turned off, then turn the key to the ON position (without starting the engine). Next, press and hold the OK button on the right side of the steering wheel for about 5-10 seconds. Watch the dashboard display, and when the maintenance reset prompt appears, confirm the operation. Remember to note down the mileage after resetting to avoid forgetting the next maintenance schedule. Regular maintenance helps prevent engine carbon buildup or excessive fuel consumption, extending your car's lifespan. I recommend checking the engine oil and air filter every 5,000 kilometers – these small habits keep the car running smoother. The whole process takes just a minute, it's safe and efficient, so don't ignore the warning light.

Was this review help?
6
Share
Expand All
DelCamille
10/03/2025, 10:10:16 PM

I've been driving my Zotye T700 for several years, and the maintenance light staying on affects my mood. Last time, I tried the method from the manual: turn off the car, twist the key to the ACC position, hold down the small button on the left side of the dashboard without releasing it, and after about 10 seconds, you'll hear a prompt sound, then the light will go off. Few steps but effective, remember not to release the button halfway. Pay more attention to the mileage in daily use, and it's recommended to service every six months or 5,000 kilometers to keep the car in good condition. My car was serviced on time last time, and there's no abnormal noise when accelerating, which is particularly important for older cars.

Was this review help?
5
Share
Expand All
StAustin
11/16/2025, 10:45:49 PM

Resetting the maintenance light is not difficult to handle. With the vehicle parked and the engine off, turn the key to the ON position, then press and hold the OK button on the steering wheel for about 10 seconds. The indicator light will flash to indicate a successful reset. Ensure the engine is not running before performing the operation, otherwise it may be ineffective. Timely maintenance helps reduce component wear.

Was this review help?
10
Share
Expand All
JanelleMarie
01/07/2026, 12:22:48 AM

The maintenance light is a warning signal; don't wait for a breakdown. The procedure is: park the car and turn off the engine, turn the key to the ON position (without pressing the brake), then press and hold the button on the dashboard for about 5-8 seconds until the menu appears, and select confirm. After resetting, adhere to scheduled maintenance to prevent engine overheating or oil issues. My experience suggests checking the filter and oil pressure every 4,000 kilometers to ensure the car's longevity.

Was this review help?
13
Share
Expand All
DiKai
04/03/2026, 11:26:01 PM

I reset the maintenance light myself every time it comes on. For the Zotye T700, the reset method is to press and hold the OK button on the steering wheel for about 10 seconds after turning off the engine, until the prompt disappears. Also, I'd like to remind everyone not to prolong the maintenance intervals too much. Change the engine oil every six months or 5,000 kilometers to avoid part aging. Maintaining good habits ensures more reliable car performance.

Was this review help?
18
Share
Expand All
More Q&A

What kind of engine oil should be used for the 20,000 km maintenance of the Volkswagen Lavida?

For the 20,000 km maintenance of the Volkswagen Lavida, use Volkswagen's dedicated fully synthetic engine oil. Maintenance cycle of the Lavida: The Volkswagen Lavida requires maintenance every 5,000 km, and generally, 4L of engine oil is added. For higher quality, Mobil 1 fully synthetic engine oil can be used, which is also compatible with any other engine oil. Classification of lubricants: Automotive lubricants are categorized into mineral lubricants, synthetic lubricants, semi-synthetic lubricants, etc. Lubricants are formulated from hydrocarbons extracted from natural gas and crude oil. There is no strict international definition for synthetic oil, but generally, lubricants containing PAO are referred to as synthetic engine oil.
101
Share

How to Deal with an Expired Temporary License Plate After Three Days?

Temporary license plate expired for three days can be handled by: 1. Reapplying for a new one; 2. Installing a formal license plate. Temporary license plates can be categorized into: 1. Temporary plates for administrative jurisdictions; 2. Temporary plates for cross-administrative jurisdictions; 3. Temporary plates for testing purposes; 4. Temporary plates for special-type motor vehicles. A temporary license plate is a paper motor vehicle license plate that permits temporary road use, also known as a temporary operating license plate. Conditions for applying for a temporary license plate: 1. Driving the vehicle from the place of purchase to the place of use; 2. Vehicle transfer, with formal license plates already paid for; 3. New vehicles in the local area that have not yet obtained formal license plates and need to be driven to another location for modification; 4. Purchasing a vehicle locally and driving it to another location; 5. Vehicles that have not yet been registered and require temporary trial use.
104
Share

How to Spray Windshield Washer Fluid in a Car?

To spray windshield washer fluid in a car, pull the wiper control lever toward the driver. The functions of windshield washer fluid are: 1. Cleaning debris off the windshield; 2. Lowering the freezing point of the liquid; 3. Ensuring the windshield remains clear and transparent for unobstructed visibility; 4. Eliminating static charges on the glass surface; 5. Reducing friction between the wipers and the glass to prevent scratches. The method for adding windshield washer fluid is: 1. Turn on the wiper switch, and the washer fluid will spray from below the windshield; 2. Continue until the nozzles stop spraying, then open the washer fluid reservoir cap and add fluid; 3. Turn on the wiper switch again to clear out any remaining fluid; 4. When no more fluid sprays from the nozzles, add washer fluid and securely close the reservoir cap.
119
Share

What Causes Steering Wheel Vibration in BMW 3 Series?

BMW 3 Series steering wheel vibration may be caused by the following reasons: Poor tire dynamic balance: During driving, if a tire experiences a strong local impact, it may cause the balance weights to fall off or become damaged, thereby affecting the tire's dynamic balance. When driving at high speeds, the vehicle body and steering wheel will exhibit noticeable vibration, which becomes more pronounced as the speed increases. Significant differences in tire pressure among the four tires: When there is a large difference in tire pressure among the four tires, especially between the left and right tires, the vehicle body will experience noticeable bumps and the steering wheel will vibrate significantly during high-speed driving. Poor four-wheel alignment: When the four-wheel alignment has significant deviation angles, the vehicle body may drift and vibrate during high-speed driving. Additionally, this can lead to uneven tire wear, accelerating tire deterioration and shortening their lifespan.
118
Share

What are the reasons for the Mercedes-Benz S600 air conditioning not cooling?

Mercedes-Benz S600 air conditioning not cooling reasons are as follows: Insufficient or too little refrigerant: A common reason for car air conditioning not cooling is insufficient or too little refrigerant, which may be caused by minor leaks, requiring a refrigerant refill. Excessive refrigerant: Too much refrigerant can also cause the air conditioning not to cool. There is a required proportion of refrigerant volume in the air conditioning system. If the proportion is too high, it can affect heat dissipation. You can slowly release some refrigerant from the low-pressure side maintenance port. Loose drive belt: If the drive belt is loose, the compressor may slip during operation, leading to reduced transmission efficiency, lower compressor speed, decreased refrigerant compression delivery, and consequently, the car air conditioning not cooling. If the compressor drive belt is too loose, it should be tightened.
118
Share

Where is the horn fuse of the Bestune X40?

Bestune X40's horn fuse is located in the fuse box next to the engine. Method for replacing the fuse: Identify the damaged fuse by the blown filament, remove the blown fuse with a fuse puller (the fuse puller is located inside the engine compartment fuse box cover), determine the cause of the fuse blowing and rectify the fault. Precautions for replacing the fuse: Note: It is prohibited to use conductive tools to remove the blown fuse; the fuse puller must be used. Using a fuse substitute or a fuse with incorrect specifications and ratings may damage the electrical system or cause a fire.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.