···
Log in / Register

How to reset the maintenance light on a Haval H2?

6Answers
DeJonathan
07/29/2025, 02:37:11 PM

As driving time increases, the wear and tear on internal vehicle components gradually becomes more severe. To ensure normal operation of the car, manufacturers have installed reminder indicator lights during production. After reaching a certain mileage, owners need to promptly replace components. After successful replacement, it's also necessary to reset the vehicle's maintenance light. Below are the steps to reset the maintenance light on a Haval H2: 1. Press the one-touch start button. 2. Press the MODE button on the left side of the multifunction steering wheel. 3. Press the SET button on the right side of the multifunction steering wheel. 4. Press the OK button on the left side of the multifunction steering wheel. 5. Observe the vehicle's dashboard carefully to check if the maintenance reminder light has been reset.

Was this review help?
107
Share
CarolineDella
08/14/2025, 07:50:43 AM

I'm also a Haval H2 owner, and the maintenance light can be a bit annoying, but resetting it is quite simple. Turn off the engine, then press and hold the reset button on the dashboard without releasing it. At the same time, turn the key to the ON position without starting the engine, and maintain this state for about 10 to 15 seconds until the maintenance indicator light goes off, then release. I often do this because it reminds me to perform maintenance at regular mileage intervals. Actually, this is a safety feature of the car. If you've already done the maintenance, manually reset it to avoid the constant flashing affecting your driving mood. If you haven't done the maintenance yet, it's best to go to the 4S shop for a check-up first, change the oil filter, so that resetting the light won't cause any issues. Be careful not to get distracted during the operation, and it's safest to do it in a quiet environment like a parking lot.

Was this review help?
10
Share
Expand All
SanMaggie
10/14/2025, 03:10:00 AM

I've been driving the Haval H2 for a while now, and resetting the maintenance light is really convenient. The main steps are: park and turn off the power, hold down the small round button next to the odometer without releasing, turn the key to the ACC position but don't start the engine, and hold for about 20 seconds until the light automatically goes off. I've tried it a few times myself and felt really happy when it worked. You can also check the official manual or short video tutorials online and follow the steps to ensure you do it correctly. After resetting, don't rush off—check your recent maintenance records to confirm the oil and filters have been changed, which keeps the car healthier. Avoid missing real issues like sensor failures; if the light keeps coming back on, it's best to take it to a repair shop rather than forcing it.

Was this review help?
19
Share
Expand All
ElliotLee
11/27/2025, 03:05:21 AM

I use my Haval H2 to take my kids to school, and I deal with the maintenance light as soon as it comes on. The method is: After turning off the car, press and hold the reset button on the dashboard, then turn the key to the ON position without starting the engine, wait for ten seconds, and the light will go off. It's very simple, no need to waste money at the shop. After resetting the light, it's recommended to check the tire pressure and brake condition to ensure driving safety. After all, the indicator light reminds you of regular maintenance, which can extend the car's lifespan. Don't rush the operation, just keep your hands steady.

Was this review help?
10
Share
Expand All
SanMaria
01/17/2026, 09:41:16 PM

Resetting the maintenance light on the Haval H2 is one of my favorite DIY tasks. After turning off the engine, hold down the reset button, turn the key to the ACC position, and keep it for 30 seconds until the light goes out. Doing it yourself saves time, but if it doesn't work, pause and try again. Additional tips: If you have an OBD diagnostic tool, you can check the codes for assistance. After resetting, note the mileage to schedule the next maintenance, such as changing the oil every 10,000 kilometers. Remember not to do it while driving—safety first.

Was this review help?
12
Share
Expand All
Aaliyah
04/13/2026, 11:25:48 PM

When I saw the maintenance light on my Haval H2, I first confirmed that the maintenance was completed. Then I turned off the car, pressed and held the reset button, turned the key to the ON position without starting the engine, and maintained it for about 15 seconds until the light disappeared. The operation must be accurate to avoid the light from flashing again. If it fails, it might be a wiring issue, so it's better to seek help from a professional shop. Resetting doesn't solve the lack of maintenance; it only reminds me to perform timely maintenance and replace parts to make the car more durable. It's also recommended to check the oil and water levels before driving.

Was this review help?
8
Share
Expand All
More Q&A

How to reset the maintenance light on a Haval H2?

As driving time increases, the wear and tear on internal vehicle components gradually becomes more severe. To ensure normal operation of the car, manufacturers have installed reminder indicator lights during production. After reaching a certain mileage, owners need to promptly replace components. After successful replacement, it's also necessary to reset the vehicle's maintenance light. Below are the steps to reset the maintenance light on a Haval H2: 1. Press the one-touch start button. 2. Press the MODE button on the left side of the multifunction steering wheel. 3. Press the SET button on the right side of the multifunction steering wheel. 4. Press the OK button on the left side of the multifunction steering wheel. 5. Observe the vehicle's dashboard carefully to check if the maintenance reminder light has been reset.
107
Share

Are the handbrake and foot brake of a car the same brake pad?

Handbrake and foot brake of a car are not the same brake pad. Introduction to handbrake: The handbrake, commonly known as the parking brake, is a braking device that keeps the vehicle stationary when parked, and it only brakes the two rear wheels. The foot brake is commonly known as the service brake, which is a braking device used to slow down the vehicle until it comes to a complete stop during motion, used in situations such as deceleration and temporary stops. Introduction to foot brake: The foot brake is the main brake of the vehicle. The transmission of braking force involves the mechanical force from the brake pedal being converted into hydraulic pressure, and the hydraulic pressure of the brake fluid is transmitted through pipelines to the brake discs. It provides strong braking force and is easy and effortless to control. It is the braking device used during normal driving, acting on all four wheels. More importantly, the hydraulic system only functions when the engine is running.
117
Share

Can You Turn on the Air Conditioning While Charging a BYD?

You can turn on the air conditioning while charging a BYD, but it is not recommended as it will prolong the charging time and may also affect the battery lifespan. More information about electric vehicle charging is as follows: 1. Impact on Voltage: Generally, new energy electric vehicles operate under relatively stable voltage and current conditions during charging. However, using high-power appliances like air conditioning requires higher voltage, which can lead to unstable current and affect charging efficiency. 2. Impact on Charging: During the charging process, the battery capacity of the new energy electric vehicle's power battery pack is fixed. Using the air conditioning continuously consumes power, which will extend the overall charging time.
109
Share

How many points are deducted for changing lanes and running a red light combined?

Running a red light once is penalized with 6 points; while driving in a non-designated lane is penalized with 3 points, totaling 6 points. Red light violation penalty standard: According to Article 2, Section 1, Clause 2 of the 'Scoring Standards for Road Traffic Safety Violations,' driving a motor vehicle in violation of traffic signal lights results in a penalty of 6 points. Article 3, Section 1, Clause 8 states that driving a motor vehicle in violation of prohibition signs or markings results in a penalty of 3 points. Criteria for determining a red light violation: Electronic monitoring captures three photos as the basis for determining a red light violation: the front wheels crossing the stop line, the rear wheels crossing the stop line, and the front wheels crossing the opposite stop line. Only when all three photos are present will it be considered a red light violation. Common methods to check for red light violations include: You can check for red light violations through the 'Traffic Management 12123' app. After opening the app, log in with your ID card, then find and click on the 'Violation Handling' option. In the violation handling section, you can see the current status of your vehicle. If there is a violation, the specific details will be displayed. Visit the office halls of traffic police branches in various cities and districts to check via touch-screen query terminals. Log in to the external service websites of the Public Security Traffic Management Bureau of each city: Find the 'Vehicle Violation Query,' enter your license plate number and vehicle engine number, then click 'Query.'
111
Share

How to adjust the clock on Wuling Sunshine?

The method to adjust the clock on Wuling Sunshine is: 1. Turn on the radio and press the upper button of the circular button on the right; 2. Immediately press the upper button of the circular button again, and the hour display will blink; 3. Use the left and right directions of the circular button on the left to increase or decrease the value; 4. Press the upper button of the circular button on the right again, and the minute display will blink; 5. Use the left and right directions of the circular button on the left to increase or decrease the value; 6. After adjustment, press the upper button of the circular button on the right to confirm. Taking the 2020 Wuling Sunshine as an example, its body dimensions are: length 3797mm, width 1510mm, height 1820mm, wheelbase 2500mm, and fuel tank capacity 38l.
102
Share

What is the tire pressure for the City?

The recommended tire pressure for the City is 2.3 to 2.5 bar in summer and 2.4 to 2.7 bar in winter. Excessive tire pressure reduces the contact area between the tire and the ground, increasing the pressure and wear per unit area, which can easily lead to brake failure, tire blowouts when encountering road protrusions or depressions, and damage to the suspension system. Insufficient tire pressure increases the contact area between the tire and the ground, causing abnormal tire temperature during driving, which can lead to tire blowouts, increased fuel consumption, and reduced tire lifespan. The dimensions of the City are 4450mm in length, 1695mm in width, and 1477mm in height, with a wheelbase of 2600mm. This car is equipped with the new EarthDreams series engine, with a maximum power output of 73kw for the 1.3L model and 96kw for the 1.5L model.
111
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.