···
Log in / Register

How to correctly start an automatic transmission car?

1Answers
LaJackson
07/29/2025, 03:20:46 PM

The correct steps to start an automatic transmission car are: 1. Depress the clutch, wait 5 to 8 seconds when turning the ignition key to the ON position; 2. Then turn the key to the start position to start the engine; 3. Immediately release the ignition key after the engine starts smoothly, allowing it to automatically return to the ON position. Automatic transmission means the driver does not need to manually shift gears, as the vehicle will automatically select the appropriate gear based on driving speed and traffic conditions. The gears of an automatic transmission are: 1. P gear is the parking gear; 2. R gear is the reverse gear; 3. N gear is the neutral gear; 4. D gear is the drive gear; 5. S gear is the sport mode; 6. L gear is the low-speed gear.

Was this review help?
109
Share
More Q&A

What is the distance for placing warning signs on ordinary roads?

On ordinary roads during the day, the warning triangle should be placed 50 meters behind the vehicle, and at night, it should be placed 150 meters behind the vehicle. On highways during the day, the warning triangle should be placed 150 meters behind the vehicle, and at night, it should be placed 250 meters behind the vehicle. If a vehicle breaks down on a curve, the warning triangle must be placed before the curve to alert incoming vehicles to avoid the broken-down vehicle. The following are the relevant regulations: Article 68 of the Road Traffic Safety Law of the People's Republic of China: When a motor vehicle breaks down on a highway, the provisions of Article 52 of this Law shall apply; however, the warning sign shall be placed at least 150 meters away from the direction of oncoming traffic, and the personnel on the vehicle shall quickly move to the right shoulder or emergency lane and promptly call the police. Article 52: When a motor vehicle breaks down on the road and needs to be stopped to fix the problem, the driver shall immediately turn on the hazard warning lights, move the vehicle to a place where it does not obstruct traffic; if the vehicle is difficult to move, the hazard warning lights shall remain on, and warning signs shall be placed in the direction of oncoming traffic to increase the warning distance, and the police shall be called promptly if necessary.
118
Share

What car brand has an inverted V logo?

The car with an inverted V logo is Acura, a premium subsidiary brand under the Japanese automaker Honda. Here are some key details about Acura: 1. The name Acura is derived from the Latin word 'Accuracy,' symbolizing precision. Its logo features a caliper used in engineering measurements, reflecting Acura's exquisite craftsmanship and pursuit of perfection. 2. As the first Japanese luxury car brand, Acura redefined the concept of luxury vehicles with its 'Performance Luxury' philosophy that emphasizes individuality and cutting-edge technology. The brand achieved tremendous success in the North American market upon its launch. 3. All Acura models are designed, developed, and manufactured in North America, resulting in a diverse product lineup led by models such as the TL, RL, and MDX.
112
Share

Are there any differences between the 2017 and 2019 Touareg models?

The differences between the 2017 and 2019 models are minimal, with the 2019 version adding some minor configurations. Here are some details about the Touareg: 1. The Touareg is a mid-to-large-sized SUV under the Volkswagen brand. It is equipped with three types of engines: a low-power 2.0-liter turbocharged engine, a high-power 2.0-liter turbocharged engine, and a 2.5-liter turbocharged engine. 2. Low-power 2.0-liter turbocharged engine: This engine has a maximum power of 137 kW, a maximum torque of 320 Nm, a maximum power speed range of 4100 to 6000 rpm, and a maximum torque speed range of 1500 to 4000 rpm. 3. High-power 2.0-liter turbocharged engine: This engine has a maximum power of 162 kW, a maximum torque of 350 Nm, a maximum power speed range of 4500 to 6200 rpm, and a maximum torque speed range of 1500 to 4400 rpm. 4. 2.5-liter turbocharged engine: This engine has a maximum power of 220 kW, a maximum torque of 500 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed range of 2750 to 3500 rpm.
108
Share

What causes the Mitsubishi Pajero V73 to stall when braking due to low idle speed?

There are many reasons why the Pajero may stall easily at idle, such as air intake system leaks, excessive carbon buildup in the throttle body, low fuel pressure, clogged air filter, fuel injector spray pattern issues or leaks, improper idle adjustment, faulty spark plugs, or malfunctioning mass airflow sensor. Idle port clogging: When experiencing unstable engine idle, first adjust the idle speed. If the issue persists after adjustment, check whether the idle jet and idle air jet are clogged. If clogged, clean with gasoline or acetone and blow through with compressed air. Intake system leaks: If the jets are not clogged, stabilize the engine at a constant RPM and listen for leaks at the intake manifold or carburetor gasket areas. If leaks are detected, resolve by tightening screws or adjusting gasket thickness.
105
Share

What to Do If the Driver's License Inspection Date is Overdue by One Month?

If the driver's license inspection date is overdue by one month, the solutions are: 1. For those whose driver's license renewal has exceeded the validity period but is less than one year, they can carry their identity proof, physical condition proof, and driver's license renewal materials to complete the renewal procedure; 2. If the driver's license renewal has exceeded the validity period by more than one year, the vehicle management office will cancel the driver's license; 3. It is also stipulated that if the cancellation of the driver's license does not exceed two years, the driver can regain their driving qualification by passing the road traffic safety laws, regulations, and related knowledge test. A driver's license is a legal document issued by the administrative department to individuals who have legally learned to drive motor vehicles, mastered traffic regulations and driving skills, and passed the relevant examinations, permitting them to drive certain types of motor vehicles.
108
Share

How to Check the Fuel Level of a Motorcycle?

Reset the odometer to zero after each refueling, and record how much fuel was used for how many kilometers traveled, or download a fuel consumption calculation app to compute the fuel consumption through the software. Below is relevant information: 1. How to calculate the fuel consumption of a motorcycle: The method for calculating a motorcycle's fuel consumption is the same as that for a car. Divide the amount of fuel used by the motorcycle by the number of kilometers traveled and then multiply by 100 to get the fuel consumption per 100 kilometers. For example, if a motorcycle travels 200 kilometers and uses 5 liters of fuel, dividing 5 by 200 and then multiplying by 100 gives a fuel consumption of 2.5L per 100 kilometers. 2. Fuel consumption varies by type: There are many types of motorcycles, and different brands have different engine displacements, resulting in varying fuel consumption. The most common type on the market is the 125cc motorcycle, which has a fuel consumption of about 2 liters per 100 kilometers. If it's a scooter, the fuel consumption might be around 3 liters per 100 kilometers, slightly higher than other types.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.