How to Replace the Oil Filter on a Sail 3?

[MacBrayden]

The method for replacing the oil filter on a Sail 3 is as follows: 1. Run the engine until it reaches operating temperature, then use a jack to lift the vehicle; 2. Drain the oil; 3. Unscrew the oil filter; 4. After all the oil has drained, replace the oil filter; 5. Screw on the oil drain plug, lower the vehicle, add new oil, check the oil level, and run the vehicle at idle and medium speed for a while. Taking the 2018 Sail 3 as an example, its body dimensions are: length 4300mm, width 1735mm, height 1503mm, wheelbase 2500mm, fuel tank capacity 39l, trunk capacity 366l, and curb weight 1067kg.

[LaAyla]

I often change the Sail 3 oil filter by myself, which is quite simple but requires some tools: a new oil filter, a bottle of new oil, an oil pan, a wrench, an oil filter wrench, and a jack. First, park the car on a flat surface, engage the handbrake, and lift the car with the jack to ensure it's stable. Crawl under the chassis to locate the oil drain plug, loosen it to drain the old oil completely, and be sure to wear work clothes and gloves to avoid contact with the waste oil. Then, locate the oil filter, usually near the bottom of the engine, use the oil filter wrench to loosen the old filter, and remove it carefully as some oil may spill. Clean the filter seat, apply a bit of new oil to the new filter's sealing ring before installation, and hand-tighten it to avoid over-tightening and oil leaks. After installing the new filter, tighten the oil drain plug, pour in the new oil, check the dipstick to ensure the oil level is at the midpoint, start the engine to check for leaks, and then lower the jack. Throughout the process, ensure safety by avoiding slippery conditions and never perform this task on a slope. Regularly changing the oil filter helps the car run smoother, extends the engine's lifespan, and saves money and hassle.

[Brandon]

I just changed the oil filter on my Sail 3 for the first time. It wasn't too difficult, so I'd like to share my experience. Prepare a new oil filter, a bottle of engine oil, common tools, an oil pan, and a jack. First, park the car in a safe place, turn off the engine, lift the car securely, and make sure it's stable before crawling under the chassis. Unscrew the oil pan drain plug and be patient—wait about ten minutes to let the old oil drain completely. Then remove the old filter; you might need an oil filter wrench to twist it off—be careful not to hurt your hands. Before installing the new filter, apply some new oil to the sealing ring—this is crucial to prevent leaks—then tighten it slowly without over-torquing. After cleaning up, add oil, start the engine, and check if the filter is working properly. If you're not confident, watch tutorial videos or ask a friend for help first. Doing this maintenance yourself can save you hundreds in shop labor costs. Remember to wear gloves and old clothes, and wash your hands afterward.

[VanBrianna]

As a family car, I often perform maintenance on my Sail 3, with changing the oil filter being a basic task. Prepare the tools, jack, new filter, and oil, and it takes about half an hour to complete, saving a lot compared to going to a car shop. The steps are simple: park and secure the car, lift it with a jack to ensure safety. Drain the old oil into an oil pan, then replace the filter—loosen the old one, and when installing the new one, ensure the filter surface is clean, apply a thin layer of oil, and secure it properly. Finally, add new oil and check for leaks. Throughout the process, emphasize safety and keep children away. Regular maintenance can prevent engine issues and make driving more fuel-efficient.

[DiBrayden]

I learned the method to replace the oil filter for the Sail 3 online and found it not difficult after trying it myself. You need a new filter, engine oil, a wrench, an oil pan, and a jack. Before starting, make sure all tools are ready. After lifting the car, locate the oil drain plug on the oil pan, unscrew it, and drain all the oil. Then remove the old filter using a special wrench. Before installing the new filter, clean the filter seat and apply a little new oil on the sealing ring. Hand-tighten it—don’t use too much force. Add new engine oil and check the level with the dipstick. Start the engine to observe for any leaks. Throughout the process, keep the environment clean and tools organized to avoid mess. Once mastered, you can handle it yourself, reducing maintenance costs. The key is to be patient and follow each step carefully.

[StLukas]

Here are some tips I've summarized for changing the oil filter on a Sail 3. First, prepare the necessary tools including a new oil filter, oil filter wrench, regular wrench, jack, oil pan, and gloves. After lifting the car, drain the oil by loosening the drain plug and wait until it's completely drained. Remove the old filter carefully to avoid oil spillage. Many people forget to lubricate the new filter's sealing ring before installation, which can lead to leaks, so I always remind about this step. After tightening the new filter, reinstall the drain plug, add fresh oil, and check for leaks. Be cautious not to make a mess on yourself or the ground during the process. If the filter's location is hard to find, consult the user manual. Ensure you select the correct filter model and change it regularly to maintain engine efficiency and prolong your vehicle's lifespan.