How to Replace the Cabin Air Filter in a JAC Refine S3?

1 Answers
SanCarter
07/24/25 7:37pm
The method for replacing the cabin air filter in a JAC Refine S3 is as follows: 1. Open the glove box and unhook the small latch on the right side; 2. Pinch both sides of the glove box inward to remove the cabin air filter housing; 3. Release the clips on both sides and pull out the old cabin air filter; 4. Insert the new cabin air filter, then reinstall the housing and glove box. The JAC Refine S3 is a compact urban SUV produced by JAC Motors, with dimensions of 4325mm (length) x 1765mm (width) x 1625mm (height) and a wheelbase of 2560mm. This model features an air purifier, automatic climate control, a damped glove box with illumination, automatic window closing upon locking, power-folding side mirrors when locked, and rear USB charging ports.
Was this review help?
20
1
Share
More Forum Discussions

Where is the Benda Engine Produced?

Benda engines are manufactured in China. Here are some relevant details about Benda: 1. Powertrain Configuration: Equipped with a twin-cylinder liquid-cooled engine, actual displacement of 394ml, maximum power of 28.5KW, maximum torque of 34N.m, paired with a six-speed transmission, and featuring an electronic fuel injection system. 2. Brand Introduction: The Benda brand belongs to Changling Benjian Motorcycle Co., Ltd., formerly known as Zhejiang Zhongnan Motorcycle Co., Ltd. The Benda brand primarily focuses on cruiser and street bikes, with its products mainly equipped with 250cc to 400cc single-cylinder and multi-cylinder engines. 3. Exterior Design: Adopting Benda's consistent design style, the overall appearance is relatively compact. The round LED headlight at the front is clearly the most mainstream design style currently, and its lightweight body weighs no more than 170 kilograms.
17
0
Share

What is the Difference Between Lifetime Warranty and Vehicle Warranty?

Lifetime warranty means the vehicle is covered for repairs as long as it is in use, while vehicle warranty refers to the warranty period specified in the maintenance manual. The specific warranty period should be checked in the maintenance manual, and the time announced in the maintenance manual shall prevail. The details are as follows: 1. Vehicle Warranty: Vehicle warranty means that various components will be replaced free of charge if they are confirmed to be damaged due to quality issues rather than human factors, such as speedometers or air conditioning components. The warranty period is based on the warranty cycle or mileage announced by the manufacturer for the vehicle. Generally, it is two years or 60,000 kilometers, but some manufacturers may offer warranty mechanisms that exceed these time and mileage limits. 2. Lifetime Warranty: Lifetime warranty is a very beneficial guarantee for users. According to the warranty details, 70% of the components are covered under lifetime warranty. Especially core components, such as the engine and transmission, are covered for life. During the lifetime warranty period, labor costs and material fees are fully waived.
7
4
Share

What brand of motorcycle is the Jinjila?

Jinjila is a motorcycle under the Benda brand. Chongqing Benda Motorcycle Sales Co., Ltd., established on April 20, 2000, is engaged in the sales of motorcycles and engines, motorcycle parts, and the manufacturing of motorcycle components. In addition to the Jinjila, other common models from Benda include the Benda Liao 700, Benda LFC700 Liao, FUN2-BD250-2, BOX-BD400-D, Hui Shi-BD300-16, LDF700 Tang Dao, and Yuan Chi Shou-BD400A. The Jinjila is a compact cruiser motorcycle introduced by Benda. The Jinjila's overall dimensions are 2120/836/1050mm in length, width, and height, with a wheelbase and seat height of 1420mm and 690mm, respectively. It has a curb weight of 170kg, an engine displacement of 300cc, and a fuel tank capacity of 15L. In terms of power parameters, it delivers a maximum power of 22.5 kW and a maximum torque of 25.3 Nm.
17
5
Share

What Causes the Rear Wheel of a Motorcycle to Lock Up and Stop Rotating?

The reasons for the rear wheel of a motorcycle locking up and not rotating are: 1. Check if the rear brake is stuck or locked, and whether the brake shoe spring is broken or detached; 2. Inspect if the rear wheel bearing is stuck; 3. Check if the return spring of the brake shoe is broken; 4. The drive chain or transmission mechanism may be faulty. A motorcycle is a flexible and fast means of transportation, powered by a gasoline engine, and steered by handlebars to control the front wheel of a two-wheeled or three-wheeled vehicle. It is lightweight, agile, and fast, widely used for patrol, passenger and cargo transport, and as sports equipment. Daily maintenance methods for motorcycles include: 1. During the break-in period, keep the motorcycle idle speed at 100 rpm; 2. Match the gear with the speed; 3. When braking is needed due to an obstacle ahead, release the throttle, step on the rear brake with the right foot, and gently apply the front brake with the right hand; 4. Regularly inspect the spark plug; 5. When installing a new spark plug, hand-tighten it until it can't be turned anymore, then use a spark plug socket to tighten it an additional quarter to half turn; 6. Regularly lubricate the chain.
20
5
Share

Should CS75 use 5W30 or 5W40 engine oil?

It is recommended to use original 5W30 grade engine oil. 5W30 has better fluidity than 5W40, which can reduce fuel consumption and heat up the engine faster. The difference between 5W30 and 5W40 engine oils lies in their viscosity. Higher viscosity means more oil consumption by the engine, higher noise levels, but better sealing performance. Therefore, when selecting oil viscosity, the age of the vehicle should also be considered. New cars have smaller gaps between engine components, so lower viscosity oil should be chosen, while vehicles with severe engine wear should use higher viscosity oil. The 'W' stands for winter. The smaller the number before W, the better the oil's low-temperature fluidity, the lower the usable environmental temperature, and the better the engine protection during cold starts. The number after W indicates the oil's high-temperature resistance. A higher value means better protection performance at high temperatures. For example, 5W40 means it can be used normally at temperatures below 40 degrees, while 5W30 means it can operate normally at temperatures as low as -30 degrees. In principle, as long as the oil doesn't deteriorate and is of sufficient quality, the oil film will remain intact, fully utilizing the oil's performance to protect the vehicle. However, if the oil contains excessive moisture, its lubrication performance and viscosity will degrade, reducing the friction-reducing effect of the oil film. Oil deterioration is inevitable and may lead to more serious accidents such as engine seizure or bearing failure.
7
4
Share

Why is the Jetta VS5's sales volume not high?

Sales are mainly influenced by brand influence, competitive environment, driving experience, and other factors. The low sales volume of the Jetta VS5 is primarily due to the following three reasons: 1. Insufficient brand influence: The Jetta brand was only launched in 2019, and the public's perception of it remains limited to the impression of 'a low-end brand of Volkswagen.' 2. Fierce competition in the market: For consumers choosing vehicles in this price range, practicality and cost-performance ratio are the most important factors. Domestic models in this price range excel in these aspects, offering a wide range of options. As a result, the product strength of the Jetta VS5 fails to stand out. 3. Cheap driving experience: Although the Jetta VS5 has Volkswagen Group's technical support, it only utilizes the manufacturing processes of Volkswagen's low-end models in terms of the three major components (engine, transmission, and chassis) and overall craftsmanship. The Jetta VS5 exhibits a cheap driving experience, particularly in noise insulation, where engine noise and wind noise are notably prominent.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.