
Eject the metal mechanical key; the key shell cannot be opened when the mechanical key is inserted. Press the physical button to eject the mechanical key, then turn the key sideways and pry upwards along the gap. Gently pry open the key shell to separate the "head" and "tail" of the key. Stand the tail of the key upright; from the gap on the back of the key, you can lift the key cover. Once the key cover is lifted, open it to replace the , then reassemble the key.

I found that replacing the for the MG 3 car key is actually quite simple. First, there is a thin gap on the back cover of the key. Carefully pry it open with a small pry tool or a coin, but avoid using too much force to prevent scratching the casing. The old battery is usually a CR2032 coin cell—note the positive side facing up. Then, insert the new battery, ensuring it's properly aligned before snapping the cover back on. The battery typically lasts about 1-2 years. After replacement, it's best to stand near the car and test the unlock function to confirm the buttons light up before safe use. I recommend using Panasonic or Energizer brand batteries for their reliable quality and lower risk of leakage. To extend battery life, avoid prolonged pressing of the key buttons. If the battery dies while on the road, you can still manually open the car door.

I often change the for my MG3 key myself, and it's quite convenient. Gently pry open the seam on the back of the key with a fingernail or a small tool, and you'll see a small round battery inside. Simply remove it and replace it with a new CR2032, which can be bought at supermarkets or stationery stores for about ten yuan each. When inserting the new battery, make sure the metal side faces upward, then press the cover back until you hear a click to secure it. After changing, remember to test the remote control distance to ensure it's working properly, so it doesn't suddenly fail while driving. It's a good idea to buy a few extra batteries and keep them in the glove box. That way, if the battery dies unexpectedly, you won't be in a rush, and you can even teach your kids some hands-on skills.

Replacing the 3 key battery is cost-effective and eco-friendly. First, use a tool to pry open the back cover gap, remove the old CR2032 battery, and replace it with a new one—make sure not to insert it backward. The battery is very affordable, and DIY replacement saves dozens of dollars compared to going to a shop. I recommend choosing a durable, high-capacity brand to avoid frequent wasteful replacements. Avoid placing the key near heat sources, such as leaving it in a car under direct sunlight or near a heater, to extend its lifespan by several months. After replacement, test the remote to ensure the lock button functions properly.

When replacing the key , handle it gently as the key structure is delicate and prone to damage. First, use a soft plastic tool or a professional prying tool to carefully open it from the edge—avoid using metal to prevent short-circuiting. After removing the battery, wipe away any dust in the slot before inserting a new CR2032 battery. If you're not confident, visit a 4S dealership or repair shop where they have anti-static tools for replacement. I once encountered a key malfunction after DIY replacement—turned out the contacts were loose. So, testing is essential: confirm the indicator light works before driving.

Last time when I went on an outing with my MG3, the key fob ran out of , so I replaced it myself in the parking lot. I found the seam on the lower half of the key, gently pried open the cover with a small blade, took out the old CR2032 battery and inserted a new one. The whole process took just five minutes, and the remote trunk opening worked immediately after replacement. A tip: choose waterproof batteries so you don't have to worry about getting wet when entering the car on rainy days. Since that incident, I've always kept a spare battery in my car, which gives me much more peace of mind during outdoor trips.


