How to Replace the Battery in a Vezel Key?

[LeAshlyn]

The steps to replace the battery in a Vezel key are: 1. Flip the small switch on the key; 2. Pull out the metal mechanical key; 3. Use the mechanical key to pry open the key cover to separate it; 4. Split the key into two halves and remove the battery; 5. Insert the new battery, then reattach the key cover. The Vezel is a compact 5-door, 5-seat SUV with body dimensions of 4328mm in length, 1772mm in width, and 1605mm in height, with a wheelbase of 2610mm. It is equipped with a 1.5L naturally aspirated engine and a 6-speed manual transmission, delivering a maximum power of 96 kW and a maximum torque of 155 Nm.

[OJesse]

I've been driving the Vezel for several years and changing the key fob battery myself is quite convenient. There's a small notch on the back of the key - use a flathead screwdriver or coin to gently pry open the casing, but don't apply too much force to avoid breaking the clips. Once opened, the battery (usually a CR2032 coin cell) will be exposed. Remove the old battery and insert the new one with the positive side facing up (the side with the plus sign). Close the cover and press firmly until you hear a click. After replacement, test the remote locking function to ensure proper response. Typically, the key battery lasts 1-2 years - replace it when you notice reduced operating distance. The DIY process takes just minutes, and a new battery costs only a few yuan, saving you a trip to the repair shop. Avoid exposing the key to water or dropping it to protect the contacts, and perform regular checks to extend its lifespan.

[NovaMarie]

As an amateur car enthusiast, changing the battery in a Vezel key is quite simple. First, use a thin tool to pry open the gap on the back of the key—I often use a bank card as it's safe and won't damage the casing. The battery inside is a CR2032 model; make sure to note the positive and negative markings. When replacing, position the positive side upward and use a cotton swab to clean the slot to prevent dust buildup. Gently close the key and press firmly to test the remote's sensitivity. This DIY task takes only 5 minutes, costs very little, and even teaches basic circuit knowledge. If the buttons don't work after replacement, check the battery orientation or for loose contacts—if everything's fine, you're all set. It's recommended to replace the battery preventively every 18 months to avoid malfunctions, and purchasing anti-counterfeit batteries from official channels is more reliable.

[DiCarter]

Girl, changing the Vezel key battery is super easy! There's a small gap on the key, just pry it open with your fingernail or a small card. The round battery is a CR2032 - when removing the old one, make sure not to mix up the positive and negative sides. Install the new battery with the printed side facing up. Snap the cover back on tightly and test the remote - it should work immediately. Doing it yourself saves time waiting in line and money. Just remember to keep your keys dry and avoid dropping them in daily use.

[SanMorgan]

At my age, I've changed the battery in my Vezel key a few times. Start by gently prying open the back notch with a coin, being careful not to break the plastic casing. The battery is a CR2032 model located in the center. When replacing the old battery with a new one, make sure the positive side faces up and is properly aligned. Press the cover firmly and test the buttons. If it doesn't work, the battery might be in the wrong direction or have poor contact—adjust it slowly. I recommend changing it every two years to prevent failure, and don't skimp on quality—choose a reputable brand for safety. Doing it yourself is worry-free and risk-free.

[VanLondon]

I'm interested in electronic accessories, and changing the battery for the Vezel key is quite simple. Use a precision screwdriver to pry open the key from the edge slot to expose the CR2032 battery, confirming its orientation; remove the old battery, clean the contacts, and install the new one with the positive side up to avoid short circuits. Close the cover, press, and test the response. This lithium battery has no memory effect—use a multimeter to measure the voltage; if it's below 2.8V, it's time to replace it. After completion, check the remote range; if the distance is shortened, there might be other issues. Learning the basics can save repair costs, and spare batteries are readily available in supermarkets.