How to Replace the Battery in a Chery Car Key?

[OwenFitz]

Method for replacing the battery in a Chery car key: 1. Prepare the tools: battery (the model may vary depending on the car model) and a flathead screwdriver. 2. Insert the flathead screwdriver into the side seam (or bottom) of the key and pry open the plastic cover. 3. Once opened, you can see the battery. Remove the old battery and insert the new one. Additional information: 1. When the owner enters the sensing area of the key system, as long as they touch the car door handle, the identity-recognition "key" they carry will receive the low-frequency signal sent by the car. If this signal matches the identity-recognition information stored in the "key," the "key" will be activated. After being activated, the "key" will analyze the authentication command sent by the car and send a corresponding signal. These signals are encrypted to enhance security. 2. After turning off all circuits and removing the key, when locking the car doors, only open the driver's door (the other three doors should be closed). Hold down the lock button for 5 seconds, then hold down the unlock button for another 5 seconds. Release the lock button first, then the unlock button. At this point, the car will emit two beeps, and the turn signals will flash twice simultaneously.