How to Replace the Battery in a Baojun Car Remote?

[BrantleyLynn]

Steps to replace the battery in a Baojun car remote: 1. Locate the plastic button on the car key and press it to remove the metal mechanical key; 2. Use the metal mechanical key or a flat-head screwdriver to pry open the plastic shell of the car key; 3. Once the plastic shell is opened, you can see the battery inside the car key; 4. Replace the old battery with a new one, then reassemble the car key by reversing the disassembly steps. Baojun is an independent automotive brand created by SAIC-GM-Wuling. Baojun has successively launched family sedans such as the Baojun 630 and Baojun 610; SUV models like the Baojun 510 and Baojun 530; MPV models including the Baojun 730 and Baojun 360; compact cars like the Baojun 310 and Baojun 310W; as well as new energy electric vehicles such as the Baojun E100 and Baojun E200.

[Betty]

Replacing the battery in a Baojun car remote isn't as difficult as you might think. I own a Baojun myself, and when the remote's range shortens or the buttons stop responding, it's time for a battery change. Usually, there's a small slot or hidden clip on the back of the remote. Just use a flathead screwdriver or a card to gently pry open the cover to reveal the battery. The most common replacement battery is a CR2032 coin cell, which you can easily find at supermarkets or hardware stores for just a few bucks. When removing the old battery, avoid touching the contacts directly with your fingers to prevent oil residue from affecting conductivity. Insert the new battery with the positive side facing up. After closing the cover, press the unlock button to test it. If it works normally, you're all set, saving yourself an unnecessary trip to the dealership. I recommend checking the battery status every six months and keeping a spare in your car just in case, so you won't panic when driving out.

[McEmery]

I find the Baojun car remote control battery replacement quite practical, as many people are afraid of damaging it when doing it for the first time. If the remote becomes unresponsive, it's mostly due to a drained battery, and the common CR2032 model is easy to find. The steps are simple: first, check the back of the remote—there's usually a notch where you can gently pry open the shell using a small tool like a key or your fingernail, but avoid using too much force to prevent cracking. Then, carefully remove the old battery, being cautious not to cut yourself. When inserting the new battery, ensure the positive and negative sides are correctly aligned—some models require the raised side to face down, so check the manual if unsure. Snap the shell back on and test the buttons a few times to confirm they work properly. Don’t forget to remind yourself to keep the battery away from children, as it can be hazardous, or take a photo beforehand to document the original setup for easier reassembly. If the remote still doesn’t work after replacement, there might be a circuit issue, and it’s best to seek professional repair.

[StMackenzie]

Replacing the battery of the Baojun car remote is very simple. There are usually clips or indentations on the back of the remote. Use a coin or a flat tool to pry open the cover and remove the old battery. The new battery, model CR2032, is easily available in the market. When installing the new battery, ensure the positive side aligns with the contact point and place it carefully and flat. Snap the cover back on and press the buttons to test if the car door responds quickly. The whole process takes just a minute or two, and it's better to check and clean the contacts while you're at it.

[NadiaAnn]

I've been driving a Baojun for five years and have changed the remote battery several times, so I'm quite skilled at it. If the remote doesn't respond, first check the slot on the back, gently pry it open to see if the battery is the CR2032 type, then buy a new one and replace it. Be careful not to force the cover open as the plastic is brittle. After replacement, test the functions and take the opportunity to teach your family how to do it themselves to save money. Also, don't forget to remind them to regularly check the battery life to avoid any last-minute failures.

[McBryce]

Replacing the battery of the Baojun remote control is not just about swapping a battery; it's more about daily maintenance tips. When the remote signal weakens, it's time to replace it. Use a flat tool to open the back, remove the old battery, and install a new CR2032, making sure to align the positive side correctly. After testing to ensure it works, develop a habit of recording the replacement date and prepare a new battery in advance next time to extend its lifespan. By the way, the battery life is generally around two years; adjust the inspection interval based on usage frequency to ensure a more worry-free trip.