How to Replace the Air Filter in a 2019 Nissan X-Trail?

[DiJohnny]

The method for replacing the air filter in a 2019 Nissan X-Trail is as follows: 1. Pry open the side panel of the glove box, use a tool to remove the four screws of the glove box, and take off the glove box; 2. Open the filter compartment, take out the old air filter; 3. Insert the new filter, close the cover, reinstall the glove box, and secure the side panel. Taking the 2019 Nissan X-Trail Fashion Edition as an example, it is a 5-door, 5-seat SUV with body dimensions of 4675mm in length, 1820mm in width, and 1722mm in height, a wheelbase of 2706mm, and a fuel tank capacity of 65 liters. The 2019 Nissan X-Trail Fashion Edition is equipped with a 2.0L naturally aspirated engine, delivering a maximum horsepower of 154 and a maximum power of 113 kW, paired with a 7-speed continuously variable transmission.

[MacLucia]

Last year, I bought a 2019 Nissan X-Trail and have already replaced the cabin air filter twice—it’s quite simple. The filter is located inside the glove compartment on the passenger side. After opening the compartment, you’ll notice two small clips on the side—just press them gently to remove the entire glove box. Behind it, you’ll find a plastic cover with an arrow indicating the airflow direction. Pry open the clips to remove the old filter. When installing the new filter, ensure the arrow direction matches the old one to avoid incorrect installation, which would reduce filtration efficiency. I usually replace it every six months using an activated carbon filter, which keeps the cabin air fresher and reduces dust allergies. The whole process takes about five minutes with the help of a flathead screwdriver, saving over a hundred bucks compared to a repair shop—totally worth it. If it’s your first time, watching an online tutorial beforehand can boost your confidence.

[LeDaisy]

As a DIY enthusiast, changing filters is my forte. The 2019 X-Trail's cabin air filter is located near the front passenger footwell - you'll need to lie on the floor to access it. Open the glove compartment by pressing the side clips to remove it, then locate the cover and unscrew it to take out the old filter. Compare the old and new filters, making sure the airflow arrow points inward when installing. All you need is a simple flathead screwdriver - avoid using excessive force. After installation, test the AC to ensure cooler airflow. Don't neglect this maintenance - clogged filters increase fuel consumption. I check mine every 10,000 km, and brand-name filters cost just around ten bucks.

[FernandoLynn]

When replacing the air conditioning filter for the first time on my 2019 X-Trail, I followed the manual step by step. I opened the glove compartment on the passenger side, pressed the edge clips to remove it, and saw the cover behind it. I gently pried it open to take out the old filter, making sure to note the direction of the arrow. When putting in the new filter, I aligned it with the slots and didn’t rush. The whole process took just 5 minutes, with no special tools required. I recommend checking owner forum tips for a safe experience, even for beginners. After the replacement, the AC efficiency improved, and the car no longer had any unpleasant odors.

[Naomi]

Replace the cabin air filter quickly and accurately. For the 2019 X-Trail: Open the glove compartment on the passenger side, press the clips to lower the box, and remove the cover to take out the old filter. Install the new filter with the arrow pointing toward the front of the vehicle; incorrect orientation may cause air leaks. I keep a screwdriver handy to pry open the cover and replace it every 6 months. A clogged filter reduces cooling efficiency and affects health. DIY replacement saves money and time, taking just 5 minutes.

[LeahMarie]

Regularly replacing the filter is good for your car. Here's how I handle my 2019 X-Trail: Open the glove box, press the clips to remove it, then take out the old filter from the rear cover. Install the new filter correctly according to the markings, ensuring the arrow isn't reversed. Opt for an activated carbon version for better odor removal. The steps are simple, require few tools, and can be done within 10 minutes. Don't forget to check how dirty the old filter is to determine the replacement frequency—changing it every six months is optimal, improving AC performance and in-car comfort.