How to remove the wrench icon after maintenance for Haval H6?

[SimonFitz]

Turn off the ignition switch. Press and hold the trip meter reset button on the instrument cluster. Turn on the ignition switch. The odometer display will start counting down. When the display shows 0000.0, release the button. At this point, the maintenance wrench indicator light should turn off.

[MacRobert]

Recently, after I took my Haval H6 for maintenance, the wrench icon on the dashboard kept flashing, which was quite annoying. I know this icon is a maintenance reminder light, indicating that it's time for maintenance, but it didn't disappear automatically after the service and had to be manually reset. The specific method is: First, sit in the car, turn the key to the ON position without starting the engine. At this point, the dashboard lights up but the engine doesn't run. Then, use the multifunction buttons on the right side of the steering wheel to navigate to the menu options, switch to the settings interface, and find an option called 'Maintenance Reset' or 'Reset Reminder.' Hold the button for a few seconds until the icon disappears. If you're not familiar with the operation, you can refer to the owner's manual, which has detailed step-by-step illustrations to avoid mistakes that might cause system errors. It's important to reset the icon promptly after maintenance to prevent constant reminders that might lead to misunderstandings about the service quality. Long-term neglect could also affect the normal operation of other systems, so it's recommended to check it after every maintenance. Remember to be patient and ensure the car is in a stationary state during the operation—safety first.

[HarperFitz]

Last time I just had my Haval H6 serviced, and I also encountered the issue of the wrench icon constantly flashing, which made me a bit nervous. After asking a friend, I learned that this icon is just a reminder for the service interval, not a malfunction. I tried the following steps: after parking the car, turn the key to the ON position (the dashboard lights up but don't start the engine), then rotate the scroll wheel on the left side of the steering wheel to find the instrument settings. After entering the menu, select the service information reset, press and hold the confirm button for a few seconds, and the icon disappeared. The operation is quite simple and only takes a few minutes. It's recommended to pay attention to regular maintenance, such as every 5,000 kilometers or every six months, so the icon won't flash mistakenly. Even if you forget to reset it, don't panic—it won't harm the car, but it's best to resolve it the same day to avoid distracted driving. After servicing, the car runs smoother, and changing the oil and filter is crucial for extending the life of your beloved car.

[JosephRose]

With years of car repair experience, clearing the wrench icon on a Haval H6 isn't too difficult. After maintenance, turn the key to ON without starting the engine, use the steering wheel buttons to navigate to the instrument menu, and find the reset option to perform the operation directly. If that doesn't work, consult the manual or visit a 4S shop for a free adjustment. The key is to reset it immediately after maintenance to avoid misleading the next reminder.

[VonGrant]

Every time I service my Haval H6, I make sure to reset that wrench icon. Not getting rid of it makes me uneasy. The method is: After parking and turning off the engine, turn the key to the ON position with the engine silent, use the central control button to navigate to the settings menu, click on reset maintenance information, and hold for three seconds to finish. Regular maintenance can prevent the icon from appearing randomly, such as due to aging engine oil causing more trouble. If the icon is left unchecked, it might be mistakenly thought that the car hasn't been properly serviced, affecting driving confidence. It's simple and worry-free to clear it promptly.

[Abel]

After servicing my Haval H6, I encountered the wrench icon and took immediate action to clear it to save time. The steps are: park the car, turn the ignition switch to the ON position without starting the engine, use the dashboard side button to enter the system, locate the maintenance reset option, hold it for a few seconds until the icon disappears. Avoid starting the engine during the process to prevent any interference. Once completed successfully, the icon is gone, and driving feels much more reassuring. It's important to address the icon promptly after servicing to avoid misleading trip plans or unnecessary concerns. If the actual maintenance has been done, reset it without delay.