How to remove the wiper of Trumpchi GS3?

[WalterMarie]

The method to remove the wiper of Trumpchi GS3 is: 1. Turn on the ignition switch and switch to the off position; 2. Within 10 seconds after the previous step, move the wiper combination switch to the mist position; 3. Lift the wiper arm and press down to remove the wiper blade. The Trumpchi GS3 is a 5-door, 5-seater compact SUV under GAC, with body dimensions of: length 4350mm, width 1825mm, height 1685mm, wheelbase 2560mm, fuel tank capacity 50l, luggage compartment capacity 370 to 780l, curb weight 1347kg, equipped with a 1.5l turbocharged engine.

[DeKeegan]

I'm the kind of person who enjoys tinkering with my car, and I'm quite familiar with removing the wiper blades on the GAC GS3. First, park the car and turn off the engine to prevent accidentally starting the wipers and scratching the windshield. Then, carefully lift the wiper arm to stand it upright, avoiding pressing it hard against the glass. Locate the connection point of the wiper blade—there's usually a small clip or button—press it gently with your thumb while pushing inward to release the locking mechanism. With your other hand, wiggle the wiper blade slightly and pull it upward to remove it. Never yank it forcefully to avoid damaging the clip or wiper arm. When reinstalling, align the blade properly and push it in until you hear a click, indicating it's securely locked. I recommend checking the wipers every six months. When the rubber deteriorates, the wiping performance drops, making it dangerous to drive in the rain with poor visibility. Replacing them is cheap and easy—just buy a branded set online and install them yourself, saving a trip to the shop.

[LaBrooklyn]

As a regular car owner, I just replaced the wiper blades on my GAC GS3 last year, learning how to do it from online tutorials. The actual process is quite simple: first, make sure the car is completely turned off, then lift the wiper arm to a vertical position. There's a small switch at the connection point—usually, you just push or press it to release the wiper blade. Remove it gently without using too much force. Installing the new one is the same: align it, insert it, and make sure it's securely fixed. It's a good habit to quickly check the wiper condition before driving. If you notice skipping or noise while wiping, it's time for a replacement—maintaining clear visibility is crucial. The GAC GS3 has a straightforward structure, so the whole process takes just a few minutes, even for beginners. If you forget any details, just refer to the maintenance manual or search for model-specific videos—it's safe and hassle-free.

[MacCaroline]

I often help my neighbors with car repairs, and the removal of the wiper blades on the Trumpchi GS3 is similar to most vehicles. Quick steps: After turning off the engine, lift the wiper arm upright, press the clip and gently pull off the wiper blade. Be careful not to scratch the glass or break the connector. For regular maintenance, don't overlook signs of aging; replace them promptly to ensure safety during rainy days.

[VonWyatt]

I once experienced wiper failure on a rainy day, so now I'm extra cautious about safety when removing the wipers on my Trumpchi GS3: first turn off the engine and remove the key, wear gloves when lifting the wiper arm to prevent pinching; locate the small button to press and release the wiper blade, never pry it forcibly to avoid damaging the car or injuring yourself; after reassembly, test the wiping performance to ensure it's normal, otherwise reinstallation is needed. It's recommended to inspect the wipers annually before winter to avoid issues in harsh weather that could impair driving visibility. Developing this habit ensures safety.

[JoelMarie]

Last time when I drove the Trumpchi GS3 on a long trip, the wiper was making clicking noises so I replaced it myself: after turning off the engine, lift the arm carefully, find the small mechanism on the wiper head and press to remove it; the whole process only requires both hands without any tools, making it convenient and hassle-free. Sharing the tip with everyone is to handle it gently to prevent damage, and pay attention to rubber wear and replace it in time, which can effectively improve driving safety especially during heavy rain seasons.